vito_96

Afternoon GTR World Just wondering if anyone has put a 2jz in a r32, I am in the middle of my swap & I am just stuck at wiring stage. Any one have any tips on the r32 body harness to Engine Harness. I plan to pin the harness out and match it with the 2jz ECU, or am I wrong Any help is appreciated. Please dont ask or make comments about why I am putting a 2jz in a R32, or the comment will be deleted. __________________

Just wondering if anyone can tell me this engine number is a r33 or r32 040705A Thanks

Hey Just wondering if you are willing to ship to Toronto Ontario Canada Pm me

pm'd

you willing to ship to Canada ?

I am unsure i have a guy telling me his rb25 is from a gts4 which i didnt know they had. Unless was there an r33 gts4 with a rb25....? i will need to look in to that however I bet the ratios are different I will be just swapping the oil pan from my rb20 to my rb26, I just wanted to keep my rb20 fully intact thanks for help guys

ya I know the rb20 will bolt up, but is the rb25 oil pan with diff, the same diff as gts4 or is it the same as gtr

Hello Skyline Family I am currently building a rb26 and will be swapping it in my gts4 sedan, I want to keep the gts4 front differential ratio. My question is: Will a rb25 gts4 oil pan with differential attach to a rb26 block ? or do i need to find a rb20 oil pan with front differential or do I need to swap only the differential in to the rb26 oil pan Help is appreciated Cheers Rob

Hello Everyone Just wondering if anyone is looking to exchange some money for parts I am looking for the following Power Fc Djetro for R32 rb26dett with sensors ( if possible ) T4 Turbo manifold N1 Oil Pump ( Preferably New ) Must be willing to ship I am located in Toronto Ontario Canada Email Me [email protected] Cheers

hey are you willing to ship to canada ontario

world best skyline build... you can use this to reference parts and help you... make a sticky

Solved issue... Needed a new AWD ecu.. easy fix

i took my dash out today and found that bulbs are burnt out and missing, i switched on and now my anit skid light is on and hoping to get more bulbs tomorrow see what else i out

Also i have a ABS relay that dead and no reverse lights

This is really pissing me off, i took off the ecu yesterday to see if it was damaged, but nope nothing everything was clean inside and i just need to test for power at ECU

So I am stumped right now I have taken the driver kick panel off and its nothing but wires for the compustar car alarm. Its like a rats nest. Is there any way that you can cut power to awd and abs. The 4wd fuse is good both under hood and under dash. I don't want to touch those wires cuz I am not suee whey they go.

Yes... My bad ya the big one if i bypass the red and yellow wires i hear the pump come on but there is no power to ecu. I did find a plug unplugged that is connected to the ABS wire... doesnt seem like there is anything that connects to it because there is nothing in the area. Also I do not have ABS. can anyone show me what dash lights are suppose to come on in a gts-4 Please

I was looking for the Ignition wire to Fuse box to see if that has been cut because the circuit is not complete when the ignition is on. I just dont understand how there is power to the relay in the truck. I got a wiring diagram but doesnt help much i need to find it in the car

The fuse box under the hood does only have power on one side and no continuity, i did find a plug that is unplugged that connects to the fuse box under the hood, but there is nothing to plug it in to... its attached to wire that goes in the strut tower. yes i aggree that something was wrong with the awd system and he disconnected it electronically, because there is no power going to the ECU but there is power to the relay in the truck no there is no lights that come on the dash, only ebrake and seat belt i think are the only ones,

So update I checked the 4wd Fuse under the hood and dash yesterday has power but no Continuity... I need to search for a ground not connected... that's tonight

Morning Everyone [/size] I was just wondering if any one can guide me on this issue I am having with my awd system on my r32 gts4. [/size] When I bought the car the awd system never worked and last night I thought I start playing doctor and see what is causing this system not to work. [/size] So Symptoms [/size] 1. When you turn the key on no AWD or Hicas lights come on, [/size] 2. Checked 10A fuse under Dash, Fuse is good ( Continuity ) but once u plug it in there is no power or Continuity. [/size] 3. Ecu no red light on & no wires cut [/size] 4. Fuse under hood ( anti-skid 30am) no continuity or power when key is turned on [/size] 5. Relay in the truck next to the latch has power but no continuity [/size] 6. I bypassed the Relay, pump comes on but if you hold it there for a while it makes a nasty noise... [/size] 7. There is fluid in Tank located in the truck [/size] I found a Attesa ECU wiring Diagram and will be working on it tonight, with searching I found that pin 42 sometimes need to be grounded. [/size] http://www.skylinesaustralia.com/for...ems-need-help/ This video Helped a lot. [/size] [/size] I need to Test the power wire to ECU and trace the wire from fuse box under dash to its power and ground, but if any one has had this issue it be great help save me some time and money. [/size] Cheers [/size] Rob[/size]