sidewaymambo

Any suggestion?

It's EVC 3

if you are send to sydney (assume Prank get the TT), I will happy to take the RSM (300)... cheers,

Hi, All My project is getting more fun now..I am looking at my Q45 AFM, it has three wire and I know they are 12V, signal and ground (or AFM ground), but which is which? Can someone out there can suggest me how to find out by multimeter (spell / typo)? or can point me to the site has the wiring diagram? thanks

I meant the stock harness..

Inasnt.. your AFM harness is 3 wires or 4 wires?

Guys, take my advice, grab the Q45 AFM while you can..350 sounds a good price, and also get a 90mm Apexi Filter.. I bought an adapter with my AFM before, but you can simply just joint the stock AFM wiring..There are three wires...PWR, signal and earth

Hi, DoughBoy.. silvis or 180sx, did you refer to the SR20DET or CA18DET? thanks

Thanks GTS-t VSPEC, I will think into it.. also got some hint from SydneyKid..he suggest adapted the rb25 TPS to replace the TPS on the Q45 throttle body..will try this tomorrow..will keep you guys post

Brett...are you driving another canter?

Hi, DoughBoy Thanks for the replied. Do you still remember what's the pin assignemnt on the connector? there are PWR, signal and earth..I assume that I can cop the wire and connect both together?

mine 414-n012....work for both (a long story)... one of my friend has problem of his stock s2 ecu, plug in mine with basic setting drive to mechanic for service..so what you think?

http://www.apexi.co.jp/products/electronic...werrfc1025.html

S1 , 2 the same..

yes..please...

Hi, Guys Some questions rising during my modification; I have Greddy Plenum with Q45 (infinite) throttle body and discover that I no longer able to use my stock throttle cable (cable is longer), and the throttle position sensor harness is different (alougth both 3 wires), so question are: 1) What throttle cable did you guys use? 2) How you wire up Q45 throttle position sensor to stock throttle position harness? 3) If you still have the Greddy plenum manual, what does it talk about on the 3-12 (page 20).. all help appreciate... Phillip

NO.. however can put on..

you will need the extracter and dump pipe as well..

Off my R33 GTST S1, turbo done 70000 KM, never boosted (stock boost). Good condition, no shaft play, no leak. Ask $500, Sydney buyer pick up prefered or interstate buyer pay postage.

The intercooler is 600x300x76, and the box is 800x450x450, don't mix up guys..

yes , you do..or Australia Air Express..

heavt duty pressure plate 850KG (1800lb) Ceramic plate, sprung center, cushtion button style.. with new thrust bearing..

Ben..car is in workshop now, let me know if you want to have look the R33 turbo..

Rezz.. shouldn't pronounced "ben-bi"?

If I remember correctly, it's 800x450x450 in box? and less then 12 kgs..