Mtecher35

Did you find a solution to your problem?

I need one, I see Am performance have one, but I'm not looking to go to a 3in exhaust. I know Scotty used to make them but also read that Daleo made a 2.5in unit. Is this true? How do I get one? Does anyone have one, not the original of course? Second hand would be great. My car has the original, connected to a V35 mid section and original/modded muffler. HELP PLEASE.

So, what I did any way was. Used Nissan to ISO connector Dna Awh3120. ISO to pioneer aepro APP0120. Connected them up then ran a wire from the blue/white wire in the aepro connector to the green/yellow on the oem loom which is on the speaker connector. Mine only has the rear speakers in it, there are two extra wires. One is the G/Y, I then cut the aerial cable off and soldered an ordinary one on. I put a cheap deck in, a MVHS405bt. I can't play it over about 1/4 volume, it's so oooo loud. I can get all Sydney stations.

Sub output sorry but does have Fr and Rr RCA outputs

I bought a new head unit and am having the same problem as everyone else. The new HU is a pioneer mvhs405bt. It has no sub input but does have front and rear RCA's if I follow your guide will this get me sound without having to run wires to the amp in the rear if I don't care too much about the sub working

I just put a set of R-SR front springs in my Nm35. After taking the old springs off the struts, I pushed down on the struts and was able to push them down every easily. Not good huh. I put it all back on with the new springs. Pushed down on the front of the car and it sprung back at me like an expectant puppy. How much for a new set of struts and what type, I see people talking about Bilsteins on this thread that's why I'm asking.

Thanx for that.

Thanks for that. I'm only doing the springs so expect to need a spring compressor. Bought them after a couple too many, now have to work out how to do it ??

How hard is it to fit new springs all round to an 01 Nm35 . I've bought a set of RS-R downs for my wagon. Can I do it at home without a hoist?

Is it sold,

I bought it off the lot after seeing it on the web

He didn't hack the loom, he made up wires to go between them, so no problem there. As the car is over ten years old they don't have to give a warranty in NSW. Didn't know any of this until I got the paper work two weeks later. He did pay for the late fees on the rego & a $100 towards the brakes.

Thanx sooo much for posting this. It fixed my car. I bought my car from a Sydney Importer & the 4WD light came on 2 weeks after I got it. His Mechanics looked at it once then they told me to go somewhere else the next time. I found this and took the car to my mechanic, who checked through the whole system then the relay and it was dead. He wired in a 40A generic and BOOM attesa pump fired up and no light.