Walfers

If you do part out..ill buy the cluster haha

Will do, thanks buddy

Tbh not sure how to

Ah ok, well I'll play it safe now now with stock ecu and just try and monitor it by ear..looks like I need a tuner!

Yeh, out of curiosity will a car knock only on load? If I rev in neutral it doesn't seem to ping..

Alright, well im doing a pump and filter soon. and then ill get it tuned.

Me? I've got a 255 that will go in this weekend.

Do you mean monitor the knock level as i turn it over? and if it jumps up then its just a rattle? i feel like to be safe ill run the standard ecu for now until i buy some more gear.

Thanks for the info guys, I'm going to buy a couple more things for the car and then get it tuned. For now I'll revert back to the stock ecu, even though I'm sure there isn't any knock and it's just something rattling. Can't be to careful. I brought the timing down -3 degrees which seemed to help a little, and will check the plugs on the weekend. For now though, I'll wait on injectors and a turbo and then tune. Cheers!

Sorry, saw up to 157 before with revs at 6600rpm. Running the standard map it comes with, no tune. I don't see any flashes as such but some threads say there's a toggle to wether it lights up or not.. If it's the actually engine light on the dash I have a feeling it's been removed because it doesn't come on with just ignition. Mods wise there isn't a lot going on, stock rb25det neo from a r34, exhaust, fmic, pod and a boost-t. When I got the car I noticed an odd rattle at around 4.5k that carried for about 500rpm and then stopped, sounded very similar to a sound my mates cat made at idle before he replaced it. If I take off very slowly I get the same rattle, but only at revs sub >1000. I'm thinking it rattles again and the power fc pics up that noise/vibration? A lot of people are saying it can pick up gear crunches and what not as well..

Anyone?

Sorry to jack the thread, just put a power fc in my 32 with a 25neo in it, did an initialise then did the self learning idle bit... Now when I rev my knock jumps up and ecu goes into limp mode.. So now I can't rev over 2k, are my knock sensors throwing out a fault reading? What do I do? Edit: just did another initialise and it doesn't limp anymore, but the knock Sensor still jumps around a fair bit, at 4k it'll nearly max out

With the tomei cams, do you loose vct? Any reason you went type b over a?

i am in love.

Pics of pedals?

Where would you buy one from? Taarks list them as rb26 compatible but not 25 neo...

Did one end up getting made for the 34?

After some things as well

all good, want me to wait or should I come grab the vents? I'm not fussed

any luck?

Have also seen this around lately

Cheers

To easy, thanks guys

I'm guessing its that big F*ck off thing to the left of the silicone joiner..

I'm not to sure what the tcs butterfly looks like, is it next to the standard throttle wheel?