Lethal26

Thanks for the help Harris racing that's exactly what I'm after

Hey guys, just wondering if anyone have or looked at bw sxe series turbos? Compressor Specifications Compressor Type: Forged-Milled Wheel (FMW) Extended Tip Compressor Wheel OD (exducer): 83mm Compressor Wheel Inducer: 61.5mm Max Flow Rate: 75 lb/min Compressor Housing Connections: Inlet: 4.0" Hose Coupler Outlet: 2.5" Hose Coupler Turbine Specifications Turbine Type: Inconel S300SX Turbine Wheel Turbine Wheel OD: 76mm Rear housing twin scroll .91 Just looking for any feed back Thanks guys

Will do thanks champ

Hey guys, just wondering if anyone have or looked at bw sxe series turbos? Compressor Specifications Compressor Type: Forged-Milled Wheel (FMW) Extended Tip Compressor Wheel OD (exducer): 83mm Compressor Wheel Inducer: 61.5mm Max Flow Rate: 75 lb/min Compressor Housing Connections: Inlet: 4.0" Hose Coupler Outlet: 2.5" Hose Coupler Turbine Specifications Turbine Type: Inconel S300SX Turbine Wheel Turbine Wheel OD: 76mm Rear housing twin scroll .91 Just looking for any feed back Thanks guys

I got the cams guys,just after the outer bolt IMG_3221.JPG

i will have a look at it n report back hopefully its the hx!! thanks champ

sorry guys i'm not here to start something... my apologies!! XGTRX yes i did i change all the fluids n thanks for the advice i appreciate it!! Ben c34 yeh the car seem good oh well shit happens n nah i'm not!! oh well might as well replace the hg n get arp head stud!! thanks for the help everyone

sorry guys I'm in nsw!!

I'm not here to have a fight or have a go over the net!! Just here to get some help!! Now u started shit for no reason!!

1 year n only done 8k km!! When I bought the car I did a major service n flushed out the coolant twice to get it clean plus a new radiator!! So I do look after my car GTSBOY n don't be a dickhead!!

??

Hey guys after rb25neo turbo intake cam shaft and also with the Bolt that comes with o ring on the outside of the cam gear?! Please sms or call on 0428627195 Thanks

34gtt sms 0428627195

not sure!! i'm hoping its not a hd!! where is that bolt u talking about?

do i need to replace it? or is there a better option also my temp gauge never past the half mark!! thanks

2 weeks ago got the compression test done n it was good, all i did was basically fitted adaptronic ecu n got it tuned!! when it start its bit funny as cold start need to be looked at again!! otherwise its fine when its warm!!

hey everyone, i got oil in the radiator but no water on dipstic or in the head? would that be a headgasket gone? car is gtr r33 stock standard just an exhaust n tuned thats all. thanks

What lift n duration?

It seems no one have used them on rb yet!! JEM fitted one on an evo n they reckon it's pretty good!!

Will look into it thanks

hey, I have 34 gtt 25neo!! Chasing around 350rwkw with a good response, which turbo you would recommend? So far I got Fmic 3inch tbe Nistune with flex tune 98/85 Hpx afm in a 3inch pipe Walbro 460 1000cc injectors Avcr boost controller Cheers