NicPM35

Just returned from the mechanic again. Tried fitting some ball joints from a 350z with no success. The bottom receiver is the same but the top bolt receiver is slightly too small. I think there is definitely a difference between the first gen and second gen m35/pm35 Stageas, as every recommendation for my car (2005) hasn't fit

Yes sorry

Here's the link to the ones I bought. http://www.ebay.com.au/itm/172587752186 I'm now looking into getting some 350z ball joints, as they supposedly fit as well and seem to be the same design, and same shape dust boot. Just trying to find out if they are 16mm bolts.

WTB Lower ball joints - PM35 Don't mind second hand as long as they are still in good working order. Having trouble finding ones that fit, as the ones I purchased from ebay for a 2002-7 M35 have 14mm bolts as opposed to my 16mm bolts. Located Sydney Thanks

Upon my own inspection of the old and new ball joints, I think I've been sent the wrong joints. The new joints have a 14mm bolt where as the old ones have a 16mm bolt. I'm so confused because that EPC data says the exact same part number as the one I ordered. Is the car you installed these joints on a m35 or a pm35?

Upon my own inspection of the old and new ball joints, I think I've been sent the wrong joints. The new joints have a 14mm bolt where as the old ones have a 16mm bolt. I'm so confused because that EPC data says the exact same part number as the one I ordered. Is the car you installed these joints on a m35 or a pm35?

I have a feeling the mechanic is trying to pull one over my head. Is there a Nissan specialist or import specialist in Sydney anyone can recommend?

The only help from Nissan I have got was $1000 each for the whole knuckle...

2005 pm35 lower ball joints help! Just sent my 2005 350rx to the mechanic with some ebay lower ball joints. Turns out the bolts on them is too small, so I'm stuck with not many options. http://www.ebay.com.au/itm/172587752186 These are the ones, they say M35, which I would assume would be the same for pm35 as they're both rwd?? Is there ones off another car like a 350z that would fit? Anyone know this with confidence?

Yep

Reviving an old thread here. (trying to find info on using different model cat back exhausts) I've got a pm35 stagea, wondering if other models like M35 or NM35 aftermarket cat backs will bolt up? For example: https://www.rhdjapan.com/fujitsubo-legalis-r-exhaust-muffler-nm35.html Cheers

PM35 centre console stereo Just pulled it out of my 350rx. $100 Cable from the screen has been cut, so not sure if screen is still usable now. I have the disk drive console bit which sits under the seat as well. Good if you want a new stereo and want to whack an empty pocket in place of the screen. Will fit m35, v35, etc Located 2203

WTB: Nismo S tune suspension M35/PM35 [NSW] Hi guys, I'm looking to firm up the ride of my 350rx a little bit and give it a slightly better stance, but not looking to go super crazy with stiff coilovers. Nismo S tune shocks and springs seem to be my best bet, also because every other option I can find involves coil-over-shock in the rear of the car, which doesn't seem good for the car. Is there any second hand sets floating around Sydney?

Sounds like a regas is the way to go! Cheers

[SYD] WTB M35 boot struts I'm chasing a pair of boot struts for a M35. Mine are weak and don't hold the boot up. Happy to regas them or go aftermarket if there is ones that fit in. Just after a cheap solution!

WTB Stock V36 mufflers I'm chasing some V36 stock exhaust mufflers. Located 2203 Sydney

Yep, had a Flex sensor running on my mx5. I know how to do it, just wanted to whether anyone here is doing it with the Stageas with success really

Yes of course.

E85 gains with vq35de? Hi everyone, Just bought my first Stagea a few days ago, a 2005 350rx. Just wondering if there is anyone here running E85 on the NA VQ engines, and whether there is much gain to be had? My last car was a turbo mx5 which was running E85, and that saw noticeable gains. My to-do list of mods will include (but are not limited to): -plenum spacer -z-tube intake -exhaust (any other easy recommendations are welcome. don't want to go too expensive) Thanks, Nic