boatlyf
Members-
Posts
11 -
Joined
-
Last visited
-
Feedback
0%
boatlyf's Achievements
-
GCG GTX3582R Rb25, power figures?
boatlyf replied to boatlyf's topic in RB Series - R31, R32, R33, R34 (1986-2002)
Cheers mate, yeah I’ve decided to go with the gtx3076r -
https://gcg.com.au/petrol-performance/performance-4/turbochargers-kits/gcg-gtx3582r-nissan-rb20det-rb25det-detail?fbclid=IwAR3xgEIMq7gjnlexgoSUjwU061fWkvztQpDhNVhj8VEmuJo5XEKOm8_HDZY Hey guys, what are peoples thoughts about these turbos? What sort of power can i expect from one of these with standard manifold and 3 inch dump with the standard flange? Cheers
-
Hey guys, Pulled my diff apart today which is a standard viscous LSD to put some shims in. I noticed the right side shim which is 0.8mm has worn and is pitted and warped, the left side isn't as bad and is 1.4mm. When i went to pull the centre out i didn't have to force it much to get it out, so I'm thinking of changing the bearings as well. The diff felt pretty good before i pulled it apart and i was happy with the backlash. I have read most people are putting in a 0.8mm shim each side on top of the original shim, this seems like a lot of shimming but i just want to here peoples thoughts. Cheers
-
Rb25det excessive blow by from track use
boatlyf replied to boatlyf's topic in RB Series - R31, R32, R33, R34 (1986-2002)
Thanks man, yeah some good ideas there, I'm definately up for a rebuild, will be doing these before re assembling. -
Rb25det excessive blow by from track use
boatlyf replied to boatlyf's topic in RB Series - R31, R32, R33, R34 (1986-2002)
yeah too easy mate. yeah I've removed mine as my catch can is vented to atmosphere not yet but will do so in the next couple of days -
Rb25det excessive blow by from track use
boatlyf replied to boatlyf's topic in RB Series - R31, R32, R33, R34 (1986-2002)
Nice mate, sounds like a strong motor. Do you think the pcv helps with blow by? Any pics of your catch can setup? -
Rb25det excessive blow by from track use
boatlyf replied to boatlyf's topic in RB Series - R31, R32, R33, R34 (1986-2002)
built motor or unopened? what sort of breather setup are you running? -
boatlyf started following Rb25det excessive blow by from track use
-
Hey guys, Have recently had problems with excessive blow by at the track. I have an at performance catch can with 2.3l capacity and fill it up after 5 or so laps. Have been told this is normal for Rb's but seems pretty excessive. I have seen peoples setups to drain from the head back to the sump but a healthy motor shouldn't need that? Im only running 250hp with a standard high flowed turbo. Thinking i need a rebuild but want to here peoples thoughts. Do freshly rebuilt rb25det's still push oil out at the track? TIA