bigboss59400
-
Posts
161 -
Joined
-
Last visited
-
Feedback
0%
Content Type
Profiles
Forums
Events
Gallery
Media Demo
Store
Posts posted by bigboss59400
-
-
THanks for your inputs guys !
no off option
I try to switch to miles but no success.
I had a look on all the options in nissan data scan and nothing more related to speed...
Well I don't understand your speed pulse meaning? on the consult there is only power, a clock at around 154Khz and the communication bus.
It's a chinese cable (seems good quality, I compared with the original schematic of PLMS that you can find somewhere online) and everything is working except speed....
Thanks for all
-
Hello,
I'm not able to get the speed using nissan data scan, read 0km/h.
I checked the vehicule speed wire that goes from the cluster to the ECU (continuity test)
I made a self diagnostic on the MFD and the speed is detected.
The speedometer on the cluster is working fine.
I also replaced my original cluster with a brand new NISMO one but still no speed.
This means that the speed sensor is working and the signals from the clusters are fine (the cluster convert the signal from the sensor to the MFD and ECU)
So I'm wondering if nissan data scan read the speed ? (I was not able to find a picture or a video with a speed different of 0 for a r34 gtr)
Everything else is working fine
Or I have an ECU issue ?
Best regards -
Hello,
As I'm planning to install a rear diffuser on a r34 gtr.
I'm looking for the reference of the triple rear cross bar vspec.
I can't find the part number or even a place to buy it...
Any help ?
Thanks for all
-
Hello,
I'm still in the debugging of my MFD, can you confirm:
- the MFD is running (or at least show something on the screen) by just putting power on it ?
- to show the NTSC video input we just need to press the TV button ?
Best regards
-
Thanks for all your reply !
I want to go bigger than 355mm and I know 355mm it will fit (cf calculation of Duncan)
In fact, I start this topic to know if someone has already done it so that he can point me out some low "height" caliper
I just measured one of my wheel and I got 412mm (I need to check the 3 others)
I should be able to fit 365mm disc or maybe 370mm
For instance if I go with this caliper
https://apracing.com/cdn/drawings/cp9560-1cd.pdf
This will give me 407mm for a 370mm so 2.5mm clearance that's not a lot I agree but still be faisable
With a disc of 365mm that will give me 397mm so 7.5mm that's better !
Thanks for your time
-
8 hours ago, GTSBoy said:
It depends on the calipers you use too. Different calipers have different radial "height" over the outer edge of the disc.
Yes you are right and I asked it implicitly, I should have precised this in my original request !
I'm looking for calipers with a small "height" thus will determined the maximum disc size
Thanks KiwiRS4T I guess I will have to make my own research...
I was just wondering if someone managed to use >355mm disc brake with standard wheels
-
THanks for your reply
For both
R35 brakes are 380mm (or 390 for latest model) so it will fit on Nismo wheels for instance but not on the standard one...
And I would like to use both and I want the biggest possible
-
Hello,
I made quite some research but I couldn't find a kit or informations above 355mm size disc brake fitment on R34 GTR standard wheels ?
Like 370mm or 365mm for instance ?
I have the ability to make custom brackets but prefer not too.
Looking for brand such as Brembo, AP racing...
Thanks for your time.
-
Well in my area, they will not bother help me to find a compatible reference...they will asked to find by myself and then they can order.
Anyway that wasn't the point of my question; it looks like I will need to look by myself when I will disassemble the CV.
-
thanks for your reply
but the goal was to order up front and not be stuck waiting for the parts ...
-
Hello,
I'm looking for alternative part of the rear CV joint trim ? C9GDA17V86 (3974117V86) and C9BDA17V87 (3924117V87)
Because the OEM reference are quite rare and so not cheap at all !
(I found alternative parts for the front CV joint trim but nothing for the rear...I even try to look for the R32 and R33 without any luck; I made the assumption they were identicals)
If anyone has some hints ?
THanks
-
Well I'm sorry I just spend a couple of hours looking for the OEM sway bar fromt and rear but I found different answers ....(I do find for upgraded parts)
So I guess I will measured them this week end.
Could you at least point me out for the diameter for the steering rack ?
Strongflex can't help me ...
thanks for your time
-
10 hours ago, KiwiRS4T said:
The suppliers seem to have it sorted. Just tell them its for an R34 GTR and it looks as though they can supply the correct parts.
I also asked but I wanted an other source to confirmed so that I will not have any surprise when I will changed them.
so if anyone can give me some info that would help me a lot?
thanks for all
-
Hello,Since all my bushes start to die, I found strongflex be a good replacement :I have a r34 gtr 1999, I want to buy this kit however I don't have the car this week and I can't check the diameter of :-Front anti roll bar-Rear anti roll bar-Steering rack mount bush-Front tie bar to chassisCan you advice me the corresponding diameters to match with my car ? I can provide more info on it if neededThanks for all
-
Yes I mean adding hood dampers.
Well I already order to this seller...and the kit he sends me doesn't fit without making 4 customs plate on the r34 gtr....
-
Hello,
Any idea where can I found a R34 bonnet damper for OEM hood ?
like the tein however they seems to be discounted
Best regards
-
Yes I removed all the screws...the speedometer part is still blocking in some way; hard to explain without a video.
Yes I noticed the DIP package of the eeprom however since it's on the other side I can't determined the exact part number and thus the interface of it (SPI or 3 wire) and the memory organisation.
Anyway I will try to removed the front cover
thanks
-
well I try again without dissasembling the front but for a R34 nismo gtr cluster it's not possible
I mean the speedometer part is blocking in some way...
So I will remove the front cover like you have done on the picture in fact
Thanks for your help
-
Thanks for your help
not same result if powered in the car or outside
I got white screen
Flex ribbon between motherboard and LCD assembly is seated correctly also this flex is fine I made a continuity test on it
-
thanks for your input
So power pin 1 2 3 at 12V and 13 and 14 at GND and the MFD start
Any idea why I get a white screen after replacing the screen (even by putting back the old one ?)
-
Hello,
I have some issue with my MFD so I'm wondering how can I start it outside of the car.
I obvisouly connected pin 1 and 2 to 12V and 13 and 14 to GND and also try to wired the ignition pin (12) to 12V
But the MFD still refused to power on.
The MFD start when installed in the car.
PS: pinout of the MFD in attachement
-
hello
how To remove the cluster board ?
I removed all the screws however there is something which is blocking in the speedometer area
do I need to unclip the transparent front, unscrew the 2 screws which holds the speedometer and also remove the needle?
or do I need to unclip the black plastic (and so the front transparent plastic which is clip on the black part)?
best regards
-
Hello,
I'm not able to figure out the size, color and number per color
I think it's T6.5 and there are 3 colors, right ?
It will save me disassembling the cluster just to order some leds one...
Best regards
-
you are the master !
Thanks for the info
- 1
R34 gtr OEM muffler
in Wanted to Buy
Posted
I'm looking for a standard R34 GTR stock muffler
Thanks