GKTECH

I need the part number for the air intake temp sensor on the intake manifold. Mines been snapped off I found a thread a few days ago with all nissan part numbers for the RB26DETT but I can't seem to find it now Greg

I started work at 9am and since then I've been searching for the thread I found a few days ago for RB26DETT part numbers. I can't seem to find it anywhere now Help is much needed/appreciated. Greg

I know that R31 an RB20 mounts are the same. Cost is less than $30 new for each engine mount from Repco

it is indeed a V36

I've also seen the cost of the Q45's in the US (bugger all) I talked to a tuner here and he told me of the AFM's having tuning problems, thus I didn't use one. I'd also love to hear from other people with personal experiences. Greg

My understanding is that the Q45 is very difficult to tune with (thus people use the Z32) With brand new Z32's being only $300, that's what I'd stick with Greg

LOL... I'll probably keep the plates for my RB26 powered S13

I had them on my 32 4 door (now sold) and they are a straight bolt on and the angle of the glass was fine (refer to pics below)

1992 Nissan S13 180SX - SR20DET I am in the process of building another car and this one must go to make way for the new bits and pieces. The car has only recently been rebuilt and has lots of new parts, new paint etc. The car has recently been resprayed by Primal garage and all the guards were rolled to fit the wide wheels. The car also has the following new parts fitted within the last 5,000km's: Make: Nissan Model: S13 180SX Milage: 131,000 Transmission: Manual Colour: Gunmetal Grey Location: Victoria Complied? Yes RWC supplied? Yes Currently registered?Yes Price: $15,900 ONO Contact: Greg 0401 554 476 Comments / Modifications: Full URAS body kit, DriftTek 17x 9.5" rims with brand new tyres all round, Whiteline rear swaybar, TEIN front castor arms, Trust oil cooler kit, Nismo thermostat, R33 GTS-T front brakes, GKTECH coilovers, GKTECH rear traction rods, GKTECH rear camber arms, GKTECH toe rod stabilizer, GKTECH rear toe rods, GKTECH solid rear subframe bushes, GKTECH deep dish steering wheel, GKTECH intercooler, GKTECH Cam gears, GKTECH twin thermo fans, GKTECH stainless steel manifold, GKTECH stainless steel turbo back exhaust, GKTECH Rocker arm stoppers, GTi-R turbo, Braided turbo lines, Walbro fuel pump, Dr. Drift boost controller, Dr. Drift remapped ECU (making around 180rwkw's), New waterpump, All new belts in engine bay, Trust gearknob, Blitz boost gauge, Type X front parkers, GTR seats in the front, Pioneer head unit with JL Audio front splits, Kenwood 4 channel amp and Pioneer rear 6x9's. Images: $15,900 ONO PM your offers!! Cheers, Greg

1992 Nissan S13 180SX - SR20DET I am in the process of building another car and this one must go to make way for the new bits and pieces. The car has only recently been rebuilt and has lots of new parts, new paint etc. The car has recently been resprayed by Primal garage and all the guards were rolled to fit the wide wheels. The car also has the following new parts fitted within the last 5,000km's: Make: Nissan Model: S13 180SX Milage: 131,000 Transmission: Manual Colour: Gunmetal Grey Location: Victoria Complied? Yes RWC supplied? Yes Currently registered?Yes Price: $15,900 ONO Contact: Greg 0401 554 476 Comments / Modifications: Full URAS body kit, DriftTek 17x 9.5" rims with brand new tyres all round, Whiteline rear swaybar, TEIN front castor arms, Trust oil cooler kit, Nismo thermostat, R33 GTS-T front brakes, GKTECH coilovers, GKTECH rear traction rods, GKTECH rear camber arms, GKTECH toe rod stabilizer, GKTECH rear toe rods, GKTECH solid rear subframe bushes, GKTECH deep dish steering wheel, GKTECH intercooler, GKTECH Cam gears, GKTECH twin thermo fans, GKTECH stainless steel manifold, GKTECH stainless steel turbo back exhaust, GKTECH Rocker arm stoppers, GTi-R turbo, Braided turbo lines, Walbro fuel pump, Dr. Drift boost controller, Dr. Drift remapped ECU (making around 180rwkw's), New waterpump, All new belts in engine bay, Trust gearknob, Blitz boost gauge, Type X front parkers, GTR seats in the front, Pioneer head unit with JL Audio front splits, Kenwood 4 channel amp and Pioneer rear 6x9's. Images:

Need 1x R34 GT-T Front Rotor In reasonable condition, but not to fussed. PM or call me on 0401554476 Cheers, Greg

I also need some R34 GT-T front rotors (non slotted) and some pads to suit R33 GTS-T front calipers. Something decent for track days but car is primarily a street car. PM me prices and availability please. cheers, Greg

Dose it comes with all the wiring and loom?

Thats cheap.. i bought a V port with the turbosmart adaptor for the R33 for like $500 from autoB are u sellin the v port with the adaptor?

I should have some bonnet clips somewhere for it. Greg

Turbo and rims have been sold. Bonnet is still here looking for a good home.

This morning I started a group buy on under engine bash plates, it met all rules and the reason i started the group buy was due to a large number of users from SAU PMing me on nissansilvia.com requesting for a group buy to be started. Do moderators not want members to save money in groupbuys just because the person running the actual GB is a trader? Greg

Thank you muchly

Can I please get my name changed to *GKTECH* Thanks, Greg

$500 for the bonnet??

Price reduction on the CF bonnet

SOLD pending payment

Tell me about it. If I had the car to put it on, I'd keep it too!! Greg

Hey guys, I received this strut brace as a present for my R32 but it doesn't actually fit my R32 (its for an R34 GTR). I'm told the brace is worth around $1,000 new and that they're very hard to find ?? Anywayz, I'll put it up for $600ono (or nearest offer). I can send out for free to anywhere in Australia. You can contact me on 040155447, email me at [email protected] or PM me. cheers, Greg

Please PM me your number. VERY interested in the shell. Greg