Waldo

are they the same bolt pattern so they are a bolt-on part, so they have a much stronger spring do they, how much boost are you running around yours

anyone got one??

hey guys this has probably been drilled to death this topic, just want to know if anyone knew what bov will easily hold 18 - 20psi without leaking, and is preferablly plumb back, is the greddy type s any good cos to me it just looks like the stock one, what about the hks ssqv? the car is going to be a drift car soon, is it necessary to put a bov on? will pluging the hole up do any harm to the turbo or the engine? regards luke

check that the internal wastegate is fully shut tight, my gt28rs watsegate rattled until i tightened the rod up

hey guys just after a gtr ballast resitor box, if any one has these that works fine send me a pm. regards luke

hey im just after a GTR drivers seat if you have drivers and passenger i will take both if the price is right and must be in resonable condition, prefer no rips or tears ,from R32 or R33 doesnt matter, am in brisbane. Regards Luke

what were your other mods done to you car?

has anyone ever had any problems with heat as in wiring resistors inline, do they corode if they get to hot, or can you get special resistors (i know resitors get pretty hot anyways) i just dont want to risk blowing my power fc up

so pretty much just keep uping it say until around 19 or 20psi or until it starts to struggle makin more power? a high flowed should be good to run 19, 20psi, shouldnt it?

hey guys just wondering if anyone knew the max boost a rb20/25 high flowed turbo with steel wheel can run, does it make a differance if its the ball bearing type or bush type?

here mate just click the link below and it will show you every power fc model with their compatible hand controller codes and boost kit codes. http://members.dodo.com.au/paul/docs/power...d-car-model.htm regards luke

hey guys im after a set of 6 GTR injectors, must be in perfect working order, no cracks or chips off the ceramic tips PM me if anyone has a set of these regards luke

with the ngk iridiums they are 1.1mm gap, im running 14 psi with standard coils, will i need to regap them to .8mm

ok i dont know what to go on but what would be the best for my rb20det, it will be running 19psi, has high flowed turbs, hks front mount, 3.5inch exhaust, cai, bosch 040, gtr injectors, splitfire coilpacks, tomei poncams. i want to know what are the best ones not value for money

what do you guys think about hks and greddy spark plugs are they any good or are they overated?

so if i simply get a gtr ballast box, i just have to cut and solder each injector positive feed into each of the wires coming out of the ballast box?, if i do it the other way as in wireing resitors inline, do i just cut the main feed to the injector and wire an inline resitor into it, if so what size resitor is needed to do this.

so if i just get a gtr ballast resistor i just plug that into the loom do i and it will work perfect?

hey guys i really need to know how to wire inline resitors in my rb20 for gtr injectors to work with my power fc, i need to know exactly what resistors i need to put in and also what resistance the circuit has to be to make them run, i dont want to blow up my precious power fc, thanx for al you help regards luke

around $2000

hey im after a hand commander for the power fc, part number 415-N001 if anyone has one or willing to seperate from power fc i will gladly buy it off you. Regards Luke

the only thing mine doesnt have is forgies and h-beam rods.

Here is the part numbers from each of the units, i just want to know if the hand controller will work on my rb20det power fc The numbers on the actual ECU that the controller works with are PFC SR2014 020-0324 and the commander is FCC3 020-00536

so a hand controller from a RPS13 red top sr20der 180sx should work on my rb20det power fc,

my car has everything besides block work.. i have fuel pump,gcg high flowed, hks font mount, 3.5inch exhaust turbo back, tomei cams, gtr injectors, power fc.

hey guys i was just wondering if anyone had all the power fc parts number, i have a rb20det power fc and need the hand controller part number for it, i cant seem to find one. Regards Luke