wannabeslida

Just looking in Nissan Fast for knuckle it shows up as part number 400-40010 (RH) and 400-40011 (LH). Same part for R32 and R33. have attached a screen print of suspension picture showing part numbers etc, if you can't see it properly just PM me and I will send it to you.

Thanks for adding the photo Abo_Bob. I got under the car and had another look, this is the corner that all the rubber boots in the driveline were replaced while they did the Lock Bar, good chance that was when the circlip was forgotten. Will call the workshop Monday and get fixed. Anyone know if this is safe to drive to the workshop or is it a tow only, have to drive about 35 mins to the workshop that did it that is all? Thanks

Can't get the attatchment to show,

Was trying to track down why the 4wd system was turning off on the GTR after about 5 mins driving ETS error 3 - right rear speed sensor error. Thought it just took a while to show up but now realise it was when I go around a roundabout or sweeping corner near home turning gently to the right. Found the following when trying to look at the sensor/wiring. Any ideas on what causes this and how to fix it so that it doesn't occur again? I can't see any bracket/bolt that has come undone that allows it to move out from the diff, is there an internal retainer that may have come off, if not, what holds the driveshafts to the diff? The only thing done recently was I had a HICAS Lock bar fitted by workshop and noticed a few bolts left untightened etc, could the workshop have caused this?

How much for "koni rear 2 point adjustible shocks gts4/gtr" and if you know price to send to Bris? Did you have AFM or AAC Valve, if you do, price? Thanks

If the other guy doesn't show give me a call and I should be able to pick up within a couple of hours. Thanks

Thought it may interest you if you haven't started the rebuild on your current engine. The engine you were talking about earlier in the post (VK56DE) has been listed on EBay with a Buy it now of US$2500, 2006 build and only 5000 miles on it. Look up EBay item no- 130092922424, not sure on cost of shipping it to Oz but worth asking about anyway.

They are meant to be fully approved for road use and are made with 2.5 or 3 inch thick polycarbonate. Not sure how long they would last but are meant to have passed crash/cornering tests for use on the road in the USA.

may have been posted already but came across these, look for them at a car show soon, am sure that to be different someone will get some. Link is http://www.autoblog.com/2006/11/03/sema-cl...steal-the-show/

Seeing as how the 400D is the camera of choice, does anyone know where to get one on special or know of a good place to buy them? Have used www.digitalcamerawarehouse.com.au before and found them good, they list 400D for $1,178.00, any better prices or deals out there? No point paying more than I have too. Haven't used before but http://www.camerasdirect.com.au list the 400D for $1099. Might pop in and check out the store as it is in Brisbane and pick up is fine. Oh, reason I am looking at just the camera body and not the whole lens kit as well is I have normal/old Canon Eos camera already and the lenses will work fine (apparently)?

If either of the guys don't turn up for the sheds, send me a message and I will come and get it. Thanks

I know everyone bleats about EBay, they sell titania NTK (original brand in GTR) need to crimp in though for US$65 the pair delivered to Aus.

Have you got Ignition Pack/Module? (Not the coils) pm, cash waiting for it.

Have a R32 GTR Gearbox (no selector/lever on it), I can not gurantee the condition it is in as have not had it installed since getting it. It was part of a group of stuff I bought, previous owner assured it was rebuilt and then stored in the shed where it got dirty and has surface corrosion. Come have a look at it if you like, if it will suit what you want, make me an offer or will swap for coilovers or wheels to suit R32 GTR (I wish). I will try and take photo of it tomorrow and send to you if you send me email address in PM.

Interested in Rear boot with spoiler and complete trim from within boot. Let me know prices, thanks?

I have a 3 inch system on my GTR at the moment, will let you know within a week or so if I can swap with you. Am in Bris so it should't be hard to arrange. Where abouts are you, north or south side?

Hi, been left off the list again, am I getting one? Maybe it will just turn up in the mail? Thanks

Hi, Just noticed I haven't been added to the list on the first page. Sent payment and mail address through last week, can you confirm if received yet? Thanks

So, how much trouble is it to install a wide band sensor, is there one which is compatible with the ECU and can drive a A/F meter on the dash at the same time? Models and price if one exist would be great. Thanks

Where are the old topics on which GTR Oxy Sensor to use. Didn't need to change them before but is looking like I do now. Some NTK 3 WIRE UNIVERSAL SENSOR (TITANIA SMALL THREAD TYPE) are avialable at a good price and just want to make sure they are the right ones I need. If I confirm they are suitable, once I have ordered mine I will let all know where to get them if they need them. Secondly, has anyone used the Borg Warner Oxy sensor which supposedly fit in to 200sx RB20 - 1996, meant to be same sensor (maybe different end plug) Meant to be equivalent to NTK 29300. Thanks all

Will grab the two tyres:Falken Ziex 235/45/18 if you are in Bris. Where are you located? Thanks

Just wondering, does that mean the Trust/Gredde Air/Fuel meters on Nengun specifically for the R32 GTR are not compatable? $345 delivered, bit pricy, but easier than computer/sensor swap and who knows what else. Product No 16000812. Comments appreciated as I was looking at buying one but won't bother if they wont fit.

I assume this is all for an R33? If you have R32 parts let me know. Free bump

How much for the number plate?

Am after the passenger Vent on R32 skyline, what price? Thanks