TiTAN
-
Posts
24,934 -
Joined
-
Last visited
-
Days Won
11 -
Feedback
100%
Content Type
Profiles
Forums
Events
Gallery
Media Demo
Store
Everything posted by TiTAN
-
can you replicate it? did boost spike over 22psi?
-
no i dont know where you can buy crack.
-
its the sound a v6 commodore makes on the rev limiter sin.
-
nice new car trailers? mark/michele, what happens when you want to take the holden and the GTR to an event?
-
getting there, at least i can finish the engineers report for it now. then its off to dickson.
-
car survived a 600km trip to sydney and back on the E85 tune (full tank + 20L jerry can), passed emissions too got around 12L/100km (on 98 it gets ~9-9.5L/100km)
-
GT35 compressor housing is approx 20cm wide.
-
not so good on the pricing front for us GT35 owners. but given the power the GTX3076 should be capable of id even consider droping down in size for the added response with minimal power sacrifice, seeing as 2wd has enough trouble with traction as is
-
-
between 500-1000rpm.
-
as far as the comp maps show there it will be very close, the gtx3071 map is almost spot on the normal 3076 so they will make similar power but the normal 3582 map still flows a few more pounds/Min more than the GTX3076
-
weaksauce. i drove to tuggers and back with a blown off turbo > cooler pipe map based yo. it will drive and idle fine just wont have any power.
-
why does it not have a turbo?
-
GTR and get one that already has the mods done.
-
E85 for the most part negates the need for WMI.
-
why not just get a hole cut in the current bonnet and get a bulge grafted on? http://cgi.ebay.com.au/XR8-BONNET-BULGE-FI...=item4cef8a6155
-
you mean something like an XR8 bonnet bulge?
-
well, id rather have rego, but tea and biccies would be nice.
-
fixd
-
yep. oil feed is close to inline with the return half way up the block, return is just above the sump. water is from the intake side of the block on the rear heater hose fitting, and on the exhaust side near the back of the block. do you have any pictures of the foam?
-
you hooked the oil/coolant lines up correctly?
-
so why limit it to 2.7l or 2.8l? get RIPS to build you an RB30 3.3l or 3.4l engine.
-
or for much less money get them to replace the rear muffler with straight pipe. guaranteed to get you from 0 - defected in 5 mins flat.
-
he seems to get ~12 months out of them before they die.
-
he means the ebay turbos are garbage and that there is a reason the genuine ones cost more.
