R TUNE

Did any one else notice that the v8 supercar coverage was just cut off due to the collingwood v blues afl game. checked the tv progam on line and AFL was not ment to start till 3 but they started it at 1.30pm btw im in darwin so 1/2 hour behind melb

Cheers guys

True but ive beng told a set of king's is about $200 ish (waiting on price for whiteline), sway bars are now around $300

I was thinking as my front is so low (RS*R springs that are ment to be that low) as they bottom out. and get some roll center back

http://www.rhdjapan.com/moonface-super-lap...k-spacers-60211 as per the link, what do people know about them and do they work

http://www.rhdjapan.com/moonface-super-lap...k-spacers-60211 what about the above any one tryed em

Will do, tyer pressure was 36psi and they were near new bluestreek 55s (el cheps that were on th car when i got it) rears are all ready now at less then 50% after motakana drags and drift.

Ok then what is it then?

Dun, she is auto so no clutch kicking at this time. handbrake just wont bite. Thats what im thinking, plus roll center would be farked. so new springs some time soon.

First run was just stomp on the gas did a 16.1 for that 2nd got it up to 5000rpm in 'n' and droped it (Still had tyer pressure at 36 psi= wheel spin 1st 1/2 way in 2nd) 3rd was at 4000rpm tyers at 30psi and she did a 15.3 from there on i just played with the revs. I would rather not do the way mentiond as i managed to blow my r31 auto box like that after 15 runs.

Ok i have the following on my 32 GTST kinda figured it out that it's a TV tuner but how does it work? I took the picks when i found an arial behind the brake peddal, as who ever installed the radio didn't use the stock arial. I kinda got it working. pluges the two pin plug back in to it? and had a 3 pin plug that fitted were the 4 pin is. so it powers up but thats all. and can any one read jap and tell me what the buttons are.

Terry, The car will be getting an aliment with in the next tw week's. Daewoo, track was tar but poor condition. i.e alot of loose tar every were as it was done at the paddock are of hidden valley race track. The line has the factory LSD in it and it works. front is pretty low and has some neg camber allready. as mentiond above the LCA sit at upwards angle By the end of the day i was able to controll the car and get it to slide. but it still would either plough understeer or snap over steer, i just adj to catching the slide and was able to hold it.

Strut brace RSR springs beileved to be Ti2000 HD 40mm～35mm lower 5.50kg/mm front 25mm～20mmlower 4.50kh/mm rear Stock rims. Problem. understeer, can’t get the back to brake traction. Hand brake is tight but wont lock properly Basically took the car to a motorkhana and drift day. Biggest problem I found was understeer and trying to get the rear end to break out. If I did it was hard to catch it and usury ended up spinning. I don’t think the front end angle (lower control arm being upwards) helps at all to. I know sway bars will help but at which end. I’ve inc some pics. The small gap between tyre and guard is the front. first is front 2nd rear

Seen

After stock r32 gtst rims. dont ceasr what they tyers are like, so long as rims are decent. PM ME

You would have to consult the rule book. This means i got to get a new bin bucket now.

After going to hidden valley off street drags (yes in Darwin with stupid 32deg and 98% humidity at 10pm) I overheard and witnessed people being knocked back due to their helmets not being of the new stranded some go through some didn't as it just come in. from the hidden valley drag racing association website. * Motor vehicles: require long trousers, long sleeve shirt or jacket, shoes and socks and an approved helmet. (eg AS/NZS1698 or SA2000, or as shown in the ANDRA Rule Book). NOTE: AS1698 is no longer an approved standard. Don’t know if this has happened down south, but looks like it time for a new helmet. By the way i ran a 15.3 @ 90mph in a stock r32 gtst 4 door. with shit track conditions (i.e no grip), with the above conditions.

cool. Hopefuly with some good tyers and new surface will be able to drop in to the 14's stock

rTook my car to hidden vally drag strip on friday night. Did a best of 15.343 @ 90mph/ weather was 32dec and 98% humidity/ car is running a catback exhaust and pod and is auto. just wondering if this is the time i should be looking at or should i be going faster?

Had a quick search dind't see what i was looking for. I'm after the size for the stock 32 33 34 GTS SMIC intercoolers. and would the later two (33 34) fit in a r32 gtst. the reason is. i wona keep the SMIC for now so i can save for a proper set up, but i live in darwin and heat is a big issue.

Hi agan wayne being a while. performance is good, I would say handling wise the chassie is stiffer then the 31 and it brakes better then the 31 (even with r33 gtst brake up grade from al) has a bit more power to. altho im starting to hate the lag from 0 to 3k when i put the foot down. the 31 was a good car to learn in and with some time i could have made it nice but keep getting done by the cops and it keep brakeing. gona take it to the drags this friday and maybe drift it to. brentt

Just brought a 32 gtst 4 door and now got some questions issues. questions. sitting underneath the head unit (an old clarion unit) is a jap thing (has jap wrighting) but what is in english says this. sound system display, tv tuner, sound flavor. any one know what it is, it's not working atm and if it's any good (worth haveing) i wouldnt mind getting it working. issue. speed adj for wipers pop's out if i play with it and the light switch just pulls off. does any body know how tofix these. brentt

I did own a 31 for 4 years when i got my licence, but took a brake with a camry and missed it to much. lol ow it is fun to be in a skyline.

Yay finerly got rid of my camry and got my self a 1989 R32 GTST 4 door. IT's in good nic with a kakamoto exhasut and unkown brand pod filter and lowered. (front lookes farked as it sit way low to the rear). Time for me to hit hidden vally and start drifitng.

Have a nardi steering wheel. universal fit. white and crome $80 plus postage. pm or call 0411895116. is in darwin.