adoboy666

have any pics of the laurel manual surround? will it fit an r32?

Bump cmon someone must have one

Hey I am after an R32 gtst manual Gearshift Boot Surround, this is the plastic surround that holds the gear boot in. please post pics if available, will pay for postage i require this ASAP as im doing a manual conversion

need the part number for the following: r32 gtst manual flywheel bolts r32 gtst manual gearbox bell housing bolts used to bolt gearbox to engine. sorry but i dont have an manual r32 vin # as my r32's automatic

doing a auto to manual conversion and need the manual flywheel bolts and manual gearbox bell housing bolts. Should i buy them at nissan? or does anyone know the thread size and length etc? as i can go 2 my local bolt place and get them cheaper there im guessing the auto bolts have the same thread but are longer or shorter, by how much is this as i could just take the auto bolts to my bolt store and get them to match up longer or shorter bolts. thanks guys

i have an 1992 r32 gts25 as well ,is urs auto?? most of them are. gonna change mine over to manual soon as my auto gearbox is dying slowly

1)are u sure those sideskirts are veilside?? i like the indent in them 2)also does anyone know wat bodykit this is pictured below? 3)any pics of the origin bodykit for the r32 ive heard about? noticed people talking about it on an old thread but pics were broken

saw this skyline parked next 2 mine at pac fair about 1 month ago, i like the kit and want to find out wat kit it is?? pics below

Thanx man got my car checked out on monday,everythings working fine electronically, we found the cause to be one of the clutch bands is wearing out.Got quoted $3000 to get fixed including parts and labour. The owner told me the gearbox will fully wear out soon as the wearng of the band creates debri which can wear out a drum at the back of the gearbox, so atm im saving for a manual gearbox and parts i have $650 atm. ive located a manual gearbox for $650 anyone have a rough guide on how much the other parts for the conversion will cost?? me and my brother can do the conversion ourselves, my brothers converted an auto 180sx to manual. p.s if the auto gearbox completely dies before i get the money for the manual conversion i will buy a second hand automatic box.

oh true my sisters boyfriend yesterday told me that when he had an auto car it did the same thing once he backed off it would change.he explained that the oil pickup line was clogged!! when i changed my gearbox oil 2 months ago it had grey sludge at the bottom kind of like lard, but i didnt fully flush the gearbox properly. anyone had the same thing??? will take my car in to a transmission specialist on the weekend

could be, but their is a possibility that nissan made the throttle bodies the same as to save on costs of changing the design and making seperate throttle bodies for auto and manual. So can anyone get a pic of their auto throttle body or confirm that a second cable is attached to it?? thanks

thanks guys so which tailshaft will i need? and does anyone have any idea about the speedo cable?

can someone FAST my r32 skyline vin- ECR32-010575 need to know if it was originally auto or manual? and any other info thanx

hi i own a 1992 non-turbo auto r32 gts25 with the rb25de engine i figure it has the same automatic gearbox as the turbo r32's (comfirm this??) im going to swap it over with an r33 turbo manual box. the thing is, is it a direct bolt on to my engine? how do you go with the speedo sensor wire connecting up to the r33 box?? and which tailshaft do you use? does it have to be custom made? how much? thanks guys p.s - im swapping to the r33 box as im going to turbo it later on and the r33 box should handle it better

hi i own a 1992 non-turbo auto r32 gts25 with the rb25de engine i figure it has the same automatic gearbox as the turbo r32's (comfirm this??) im going to swap it over with an r33 turbo manual box. the thing is, is it a direct bolt on to my engine? how do you go with the speedo sensor wire connecting up to the r33 box?? and which tailshaft do you use? does it have to be custom made? how much? thanks guys p.s - im swapping to the r33 box as im going to turbo it later on and the r33 box should handle it better

my brother looked at my car this weekend and discovered that my r32 gts25 was originally manual not automatic. we confirmed this after seeing a plate with bolts covering where the clutch master goes through the firewall, and looking at the auto brake pedal assembly and discovering yellow/whit paint mark on it, meaning it was bought from the wreckers my brother also said there should be another cable going to the throttle body other then the accelerator cable. he said it was a "kickback cable" or something like that. 1)if possible can someone take a pic of their automatic auto throttle body to show me the 2nd cable or confirm me on this? 2) ive tried the gearbox diagnostics but havent got it to work any tips? 3) my brother told me i probably still have the manual ecu still in it would this prevent the auto diagnostic from working? thanks again p.s- do you know anything else that i could ckeck eg electrics to confirm that the auto gearbox was installed properly and that it has all the essential parts

after driving around for a week, it doesnt seem as bad as it is. after i rev up and back off in 1st gear it changes now, and it only happens like once or twice when i go for a 15min drive around the gold coast. The oil was black when i got the car and changed it immediately, hopefully the gearbox will last till i get the $ for a manual conversion. anyone know roughly how much a manual gearbox with conversion parts costs? does anyone have a manual gearbox for sale? thanx again

hi im on the gold coast and am wanting to start my manual conversion on my r32 gts25 rb25de engine. if anyone know where i can get a manual box to fit this please post a reply with cost or details of it. thanks

after a night the car in the garage ive checked the transission fluid to find it below low. when i checked the fluid level last night it was above high but this could be due to the oil sloshing around up the filler tube and making a false reading. atm im taking the radiator out so i can get to the seperate tranny oil cooler and check where its leaking from. hopefully once the leak is fixed and once topped up with oil it will work again. as soon as this is done i will take it to get the gearbox serviced and checked out. anyone have any good reccomendations on transmission places to get a service located on the gold coast that know skyline gearboxs well? thanks again

pm sent to booster

Tonight while driving around the gold coast my auto gearbox wouldnt change out of 1st gear and just seemed to rev up to redline.Gearbox was fine only seemed to start playing up after leaving my house,as usual i parked my car in my driveway which is a 30 degrees incline 1 out of every 5 times it would change out of 1st into 2nd i am now driving in snow atm due to this problem i have a seperate transmission cooler up front but not the stock radiator one, as my radiator started to leak and had to replace with a manual radiator. i only flushed out the tranny fluid 200kms ago and i did this as the oil was black and would change gears at 6000 revs. after changing the fluid and cleaning the tranny filter it seemed to change gears at 3000-4000 revs. ive noticed some oil at the bottom of the radiator, could be transmission fluid leaking from the cooler, would this affect gear changes in 1st? thinking of getting the gearbox checked out, how much would it cost roughly to get checked out? any reccomendations on reputable transmission places on gold coast? sorry for the long post, i just want my car to get all better lol, p.s if anyone has any ideas on whats wrong/advice with the gearbox or if youve had ur own experience please post thankyou guys i appreciate your help

The exhaust sounds sweet, it is drony and i have lost my bottom end but my top end torque feels great, will post up an audio file of it soon, wat should i use to record it?

<br /><br /><br />Do you think if i get a silencer made up it will help could give me back some precious backpressure?? anyone have any estimate on the cost for getting one made?? thanks again

just measured the width of the pipe and it actually is 3" not 2.5" i was misinformed by rolin automotive. how will this affect the engine? ive heard it will drone a lot but i always have the music up so it doesnt matter.i will still put it on just need these q's answered first. my standard cat has a 2" outlet hole with flange, the exhaust has a 3" inlet hole with flange, the bolt holes for the cat flange and the exhaust flange are the same (11cm apart from middle of bolt hole to middle of bolt hole) so im guessing this will fit right?? can i buy new exhaust flanges from supercheap? p.s later on i will throw a turbo on my car so it saves me having 2 buy a 3" when i do.YAY! thanks again sorry for the long post

as the topic states today i bought a fujitsubo 2.5" cat-bak exhaust 2nd hand for $150 bought it locally from rolin imports in burleigh on the gold coast. i have some pics up and will install it this weekend.The exhaust is stamped fujitsubo and jasma. just wanted to know how much this exhaust would cost brand new? also some stories about the performance of the exhaust if youve installed it on your na skylines? as well as the sound of it (sound files if available). p.s any tips on undoing the exhaust bolts? thanks guys pics are attached (this will be installed on my r32 gts25)