2BNVS

left ya msg on msn man, get back to me asap ben...

yep didnt reshim mine

im the same as rockabily

he doesnt drive hard enough to upgrade those parts

that kaaz diff sittin under it looks familiar ;-)

the ones with the holes are cross drilled which yes i have seen many times they fracture and crack, i wouldnt bother going cross drilled for street... i run dba4000 slotted on mine and they are great

i did a mod to my stock fuel rail to make it twin entry, stock lines... just an 044 external and 040 internal, made 352rwkw

they all have all wheel steering as with the hicas unless u get a lock bar, u didnt mean awd did u?

yeh adrian u filthy f'n ricer u better make it up here for jambo lol :-p ben...

found one cheers

Item: t04r/66 (formerly a td07s) t4 flange Age: bout 15,000kms Condition:excellent no shaft play, no damage Price: 600+post To Fit: (What car) to suit 3L and up or a strip 2.5L/2.6L etc Location:gold coast Contact: pm, [email protected], or sms 0415035861 Comments: has a mirror polished comp cover, turbo hasnt even been put back together since the polishing, ive personally done about 2000kms with this turbo the previous owner Mattlowth ( on the forums) had it previously. no shaft play, made 340rwkw on 24psi on my rb25/30... do have a dyno print out of the 18psi run which shows a pretty straight up power curve exhaust a/r is unknown as i didnt perform the wheel change, cheers...ben.

sweet build mate, yeh steve is awesome he helped me out a bit with my build ( although now im in qld) you'll be 9s for sure once everything is sorted and suspension set up is sweet. ben...

after a crank angle sensor with housing, bolts etc etc ready to go pm, email [email protected] or sms 0415035861 cheers...ben.

should be 28 spline as pintara's are 25.. they are also lsd on the silhouette...heard they arent that much better.. i just put a mini spool in mine lol

im after these for my rb26/30 hoping to push 600rwhp water pump n1 timing belt stock throttle body sandwhich plate ( between head and throttles) cam cover rubber gaskets splitfire gtr coilpacks pm or email [email protected] or sms 0415035861 located in gold coast qld or wollongong nsw ben...

i use autronic cdi with my SM4 its great i luv it, was running 375rwkw previously with smaller turbo, hoping for mid 400rwkw's with the new set up ben....

alot of cars up here i see everyday driving.. some of u may have seen them TOPRPM-874awhp (33gtr) ONBAIL-hp? but i know its alot (32gtr) HITMUP- 600+rwhp (t51r, 2spd pwrglide 5800rpm stally) also have a mates 33gtst with 22s, gauges on bonnet, lowered etc etc

on my r33 yes it was a bees dick without touching... i had a t04r/66 low mounted, this is fairly similar to the 35/40 from what i have seen from my bro inlaws 35/40... only possible to low mount them with a 3L bottom

my bonnet issues were fine with my rb25/30 stock plenum etc... yes it was higher but i could still close the bonnet

ring jim berry,,, 600rwhp in my rb26/30 t04z and his one is fine...will be seeing some drags soon, which is what i told him when he was getting the kit made up

Item: t04r/66 turbo, backcut exhaust wheel, polished compressor cover, 360deg thrust bearing Age:bout 30,000kms Condition:very good Price:800+post To Fit: (What car) any car... T4 split pulse exhaust housing Location:gold coast Contact: pm or email [email protected] Comments: no shaft play at all, polished compressor cover... will suit 3L+ came on boost 3500, 22psi@4230, 352rwkw... have 18psi dyno run to show boost curve ( pretty straight up)... housings are seperated as i got the comp cover polished never bothered to put it back on as i got bigger turbo, as with exhaust housing was going to get it hpc coated... have all the clamps etc.... will get pics tomorrow when i get my camera cheers...ben.

cp is the best option, i use them... at least they make decent hybrid specific pistons..i use the lower comp rb26/30 pistons they offer

dunno if its much use to u, but i got a trust td07s (modified to a t04r/66 by Mattlowth on these forums) bought it bout 18 months ago when i bought his motor (rb25/30), although i have only done about 2000kms with it... made mid 300rwkw's on 20psi, with a slightly rich tune and only rev to 6000rpm (was still climbing) t4 flage polished compressor cover pm me if ur keen though, cheers...ben.

www.spongenbubbles.com.au i found his work sensational

www.southcoastcarscene.com.au ( or just .com) forgot, havent been on it for a while