teng

Stock Gear ratio on R33 GTS-T is 4.111/4.363 (i dunno which one i have) What if i change the ratio to 3.538? I searched around and found that it will; 1. Reduce acceleration and torque 2. Increase fuel consumption 3. More gear change as it will hit the limiter faster (need to confirm) 4. Higher maximum speed (need to confirm) Final Question, will it Anything that is wrong please correct me. Thx.

Stock Gear ratio on R33 GTS-T is 4.111/4.363 (i dunno which one i have) What if i change the ratio to 3.538? I searched around and found that it will; 1. Reduce acceleration and torque 2. Increase fuel consumption 3. More gear change as it will hit the limiter faster (need to confirm) 4. Higher maximum speed (need to confirm) Final Question, will it benefit the Anything that is wrong please correct me. Thx.

I did mine a few days back. Kinda sucky and i don't have the materials to make it any better. Problem1: The led board is kinda short hence the S & E are missing some light and no one here sells them. I got this from the EXIT sign's LED panels. Problem2: The LEDs seems to shine bright and normal for some weird reason. Problem3: The color matching the car is not thick enough so light seeps through. The LEDs are green by default. This is very hard work and i don't think i will attempt to fix it Just keep the panel incase i need to use it since it's already painted to body color.

The usual tire pressure required. How many kpa or psi required. The front is 225/45 R17 and the rear 235/45 R17. A photo of it would be nice too

Ok. I need a Photo of Z33 Tire pressure sticker. I need the one with the 17" wheel version, not the 18" Latter version. Anyone can help me Thank you. Teng

As the title says, i know most people don't want the emblem so i'm hoping there are a few members out there who would like to sell theirs. It has to be in excellent condition, No bends or whatsoever. Another note; As my sig says, i don't reside in Australia so only members who are willing to post, please PM me. Include the shipping with the PM.

If you can't find a skyline with a non power steering option, then the answer is a no. [off topic] My friend's toyota corona has a power steering but with a very bad leak. Luckily that same model also had a non power steering option and he found the exact part and bolted it in place. Works like a charm.

CD Changer cable of some sort.

I see. Doesn't have to be any special reducer hose. I was searching for HKS straight reducers but can't find any online. I'll go to the workshop today and see if i can get a normal hose to fit. Thanks R31Nismoid.

I know this is a very old thread but does anyone know where you can get a plumback hose for the GT-R stock BOV? It's like 40mm from the BOV to 30mm on the black hose that goes back to the intake. I can't read the vernier caliper that well so the size maybe way off but you get the idea. Thanks.

The turbo is going onto my RB25DET which doesn't have this nipple at it's stock elbow. I already have a boost gauge. If i connect this to the wastegate actuator, then i may need to block off my stock connection lines which is ok i guess. I don't have a boost controller. If i block off the line, what do i need? Just a normal screw with the appropriate thread? Thanks for the advise.

HKS GT2530 KAI for RB25DET ECR33 Anybody here knows what connects to this (circled)? Never seen it before on a turbo elbow.

Thanks.

Question1: As above, does this S14 Steering wheel have an airbag or is it a non-airbag version? Question2: Will it fit onto a R33 GTS-T? I heard that 180SX,S14,R33 Share the same steering wheel if it's an airbag version (4 spoke ones on R33 S2). Just asking if an non-airbag one will fit. I guessing it should but i need to make sure. Thanks. p/s: i know airbag to non-airbag is illegal and blah blah blah. I just need confirmation not debate. Thanks.

Don't know if you still need these part numbers but here they are; Left side hose is 11826-75T00 Right side hose is 11826-21U00

And don't forget, for the Passanger Side Aiebag, a big hole must be cut onto the dash or otherwise you can find a Series 2 dash.

We only have 2 main types of fuel here. 92 Octane and 97 Octane. The other 2 types of fuel are Diesel and Regular (dunno what ron that is). Of course i only use Octane 97 aka known here as RON97.

http://www.skylinesaustralia.com/forums/Ra...er-t250245.html Hope that answers your question.

kk. scratch this topic. I got the info i need.

The Mines ECU is from a S1 or S2 and what code is it?

I see alot of Mines ECU being sold here and there especially on e-bay. I also know these ECU need RON100 to run as Japan uses 100 Octane fuel. What i need to know, is the Series 1 and Series 2 models the same and are there interchangeable? There are numerous codes like TJ, TK, CC and G8. I know my Series 2 ECR33 has a G8 ECU. Now if the Mines ECU is also G8, does than mean i can use it without any problems other than the 100 Octane compability? I also heard that there is a compability issue on S1 and S2 ECU's cause of the ignitors. With that in mind can i also use any of the other codes? Remember this if for my info. I'm still digging for information using the search engine as well.

Most aftermarket boost gauges come in x1000kPa hence the stock will move and show the same pressure as the aftermarket one. I know mine does.

Hmmm...Shallow one. The same as what i've got. Thx for the images.

Damn. The front seats look sweet. Why didn't my 96 R33 come with these (cause they're GT-R) lol I'm chasing for alot of interior parts for my gts-t but it's impossible to get them since it's not readily available in my country unlike Australia.

Is the center console the deep one? Unlike the SRS version one which is shallow?