Ad's

I forked out the money for splitfires about 2 years ago when i dropped the 25 into my coupe, even though they are pretty much bran new i dought id be replacing them anytime soon. Do it once and do it right. Poor man pays twice if you cheap out. Not bagging other cheaper brands and im sure there is storys been as good as the top of the market brands but i only go for the best of the best. That's my 2C.

I can supply you bran new ones from Nissan if you are interested? I work at a Nissan dealership in the Hills. Pm me if you are interested.

Do it you know you want too Pointless update. Cross member, steering rack is back in and painted. Drilled the holes out to fit the Cazman caster arms and painted the RCA's and put them in also found a place that should work with the oil filter relocate. I will have to massage the radiator support as its been bent upwards witch causes the radiator to sit higher but no biggie. Hopefully tomorrow i will have better updates as I'm planning on having the car back on the ground rolling again. Trying to have it ready to move around for when the shed arrives.

Make offers people

We stock the thickest ones fornskylines/silvias. Pretty sure we have them in stock. Pm me for more info

I have a fresh r33 flywheel ready to go. I'm in sa too. Pm me if you are interested.

Would you sell the manifold heat shield seperate? If so pm me as im keen

I have a r200 long noise open centre if you are interested?

Bump again

Had a sick day off work to progress with the shed plans and to get the manifold all cleaned up. This is the extent of 5 hours with a wire brush on a drill, i still have to do all underneath and the collector as well as two more pipes on top. Such a long process...

Also chasing some Z31 rear turbo 5 stud hubs.

Thanks mate cant wait for skids!!! No real updates as i have been doing a 25 gearbox swap on my brother 32 witch is proving to be a little harder than first thought. Got the radiator today i must say I'm happy how it was packaged and sent. The shroud fits up perfect but i have to modify the mounts underneath as they don't quite line up the top, as well as ill tap a thread out for the sensor in the bottom of the radiator. Apart from that it looks like a sturdy piece of gear now looking at in the engine bay i may need to run thermos on the other side for room clearance if these ideas i have don't pan out. Paid for the roll cage today even though it wont be CAMS spec i believe a roll cage is better than nothing just in case the unthinkable happens. Found it cheap so it's no real loss if i on sell it for what ever reason. Shed is now changed size again as I'm allowed to go bigger thanks to the Mrs haha. Now we are going for a 5.5 M X 6 so we can build of the shed and extend the pergola area later on. Thanks dude. Thanks to XXXI (my brother) i bought a Tomei adjustable exhaust cam gear that now finishes off the engine side of things for now. I picked up the roll cage today and gave it a quick trial fit. The main hoop is prime as it fits with the roof lining still in witch i am happy about, the front legs are so close but need a little modding as for the rear part its so cloase but the rear legs will be a little shorter and it will fit pretty much perfict. Sold my diff the other night and the Mrs got most of the money . But i bought some Davies Craig 12 inch thermos X2 and a cooler core that I'm going to use as a fuel cooler. Next on the list will be too build the shed and get it happening!!

Bump cluster found.

Looking for the following parts: HR31 impul cluster. Kaaz or cusco 2 way diff to suit HR31. Centure is fine kaaz wise as i have a housing Kaaz part number im looking for is SAN 2655. Not too sire if cusco are the same. Fuel cell in boot. Looking for something around the 70L but can be smaller. Pm me more information and price. Im located in SA but i can pay for freight depending on price. Cheers Adam

Diff sold.

Looking for a 260km impul cluster to suit my HR31. Pm me if you have one or know of one for sale. Thanks

RB25DET exhaust manifold. Due to a GTSR manifold i no longer need. $100 RB25DET standard injectors with out rail. Upgraded to larger items. $100 RB25DET inlet manifold. Doesn't come with throttle body or tps. Going ffp so i no longer need. $80 RB20 xtreme clutch and flywheel. Upgraded so no longer need. $150 RB25 freshly mechined flywheel. Upgraded to a molly item. $100 Diff sold.

Pm sent

Data logit sold Diff added

R200 long noise LSD. To suit Old school datos/Hr31 etc. Looking for $650 Data logit sold Make offers on the rest

Price on springs if you will seperate?

Updated. Got a bran new apexi data logit that im looking to sell as im thinking of selling my power fc too. Its so new i havent even plugged it in and used it yet. Comes complete with everything needed to use the program. $300 I can post if need be at your expence. RB25DET exhaust manifold. Due to a GTSR manifold i no longer need. $100 RB25DET standard injectors with out rail. Upgraded to larger items. $100 RB25DET inlet manifold. Doesn't come with throttle body or tps. Going ffp so i no longer need. $80 RB20 xtreme clutch and flywheel. Upgraded so no longer need. $150 RB25 freshly mechined flywheel. Upgraded to a molly item. $100 All items are for a S2 motor. If serious please pm me. Adam

I have a mechined standard rb25 flywheel that i just got done. $100

Do you read?

Thanks mate. More crossed off the list today: Fitted up my brake booster, clutch master, brake lines and a few other little things Working out how to hide my body loom on the drivers side. I have all the engine loom sussed with my gauge loom etc Changed my rack boots, rack bushes, rack spacers went in with cazman adjustable caster arms. Ran into trouble with the s15 links as the thread is too short and the whiteline bushs are too long, ill have to cut the bushes in half to make them fit id say. I also have to drill the caster arm holes out a little wider to suit the cazman items. Gave the cross member a coat of paint to tidy it up so it looks like new again. All that is left to do on the cross member side is the links with bushes, solid steering bush and block off the HICAS lines on the rack. Would i be right in saying when you fit the cazman arms you don't put the bushes in too? As the thread is too short on arms. Pulled the diff out as i have finally found someone that isn't a smoker and just wants to waste my time