BMYHOE

ok i will double check with them but there seems to be lots of guys using them without any dramas

im using a haltech p2000 the lastest one, and with the tuning im going to a repuable tunner in sydney that is know for Rb30's etc. also with the wideband 02 sensor should i put 1 or 2 in the dump pipe?

this is the muffler http://www.ebay.com.au/itm/XFORCE-VAREX-MUFFLER-REMOTE-SOUND-CONTROL-FORD-HOLDEN-/130526256079?pt=AU_Car_Parts_Accessories&hash=item1e63f89bcf

ok good to know, with the injectors ive been doing some homework and found most guys are using the id2000 which are ment tobe good for smooth idle etc.. was thinking 3.5inch dump then 4 inch cat back.... muffler im probly leaning toward varex for noise control when needed

yeah just after some head room on injectors for later on so ill do the id2000's ok i might just keep with standard pulleys just in case there are any problems. with the exhaust i was looking at getting a custom muffler made so i can keep the noise minimal. also looking at the varex muffler. - thoughts on that?

got a few questions about my RB30 TWIN CAM; 1/ going to be running E85 and going into the 400rwkw territory looking at 2000cc injectors - bosch 2000cc's? OR Injection dynamics 2000cc's? which one should i get? 2/ looking at getting aftermarket pulleys. but i am running Rb25 Ross harmonic balancer with Rb25 power steering pump/rb25 alternator & rb26 N1 water pump. can i purchase an off the shelf pulley kit for this? are rb25/rb26 pulleys the same? looking at this http://www.ebay.com....=item27ba6a17ee 3/ im running a GTX35 T4 1.06 turbo on 6boost mani - for my exhaust im getting made up a 3.5inch dump to 4inch cat back? is this ok or should i keep it 3.5inch the whole way? thanks guys,

i find the t/s to be better quality the tial

the Guy that bidded on ebay is not MAN enough, SO the wheels are still for sale open to offers guys!

12 HOURS LEFT

or even the os giken block maybe?

your best to ring Jim Berry as each car is different and each clutch is different ring him up tell him what your doing and he should help you with what clutch/pricing etc.

i think he is overseas's not sure where. can you run bigger head studs ? retap block etc?

BUMP!!!!!!!!!!!!

idd be ringing who ever your buying them off

im using a nitto in mine (hasnt been started yet)

PMS REPLIED

well they look promising but without to many results floating around its hard to say how well they proform..

10 Hours LEFT ON EBAY

nah, you cant buy things like this

it left a deep hole in my pockets... lets just sat that

or jump on the EFR band wagon

EFR9180

THESE ARE ON EBAY NOW NEED TO MAKE ROOM! http://cgi.ebay.com.au/ws/eBayISAPI.dll?ViewItem&rd=1&item=300554636798&ssPageName=STRK:MESE:IT

BUMP

you can buy my manifold depending what size turbo its in NSW sales & on ebay