warpz0r

bumpity bump bump

bump

hi all im after a rb25 head either r32 or r33 minus the intake and exhaust manifolds.... either a bare head or a head with just the cams and hydraulic lifters.... thanks

hi all im after an adaptor which will tap into the head of a rb25 and go into the oil pressure sender unit with a t bracket as a way of getting oil into the vct.... thanks

you forgot to mention the fuel itself... it could go stale

is this a nasty turbo or a good turbo?

i dont think i used the white plugs (vl conversion) that you have labelled.... the plugs above it are ecu +12v and starter motor i think

come on guys

someone must be getting rid of one.... if the price is ok, maybe an aftermarket one?

will pay cash today if in sydney...

hi all are the r33 exhaust cam shafts all the same or are they different? thanks

hi all i am after a rb25det exhaust cam shaft its for a series 2 head (i think) any difference between the series? thanks

no, the cars were just an example... what is a early model can and what is a late model car is what i was after

what is an early model car and what is a late model car? is a late model car a 95 r33 skyline and a early model is a 91 r32 skyline?

so how do you move the cam into the right position for when you fire it up for the first time? because you have to have all the dots / markings line up

hi all with the baffle plates on no 6 and 7 cam brackets, they are installed on top of the brackets with 2 washers right? also, i shouldnt be able to move the cam arround by hand with the pulley on should i? it cant be moved round by hand can it?

i think, if im reading the Nissan fast software correctly, its part number 13058

i snapped it replacing the cams... not from driving it... want to do it all myself as a learning experience...

this is the cam bracket that holds the actual cam down... its one of the bolts that holds down the exhaust cam bracket

yeah, but if i drill it out, wont there still be some of the old bolt left in there? and also, i could damage some of the tread the bolt would attach it self to.... atleast if i use a easy out tool, i just have to drill a small hole into the broken bolt, then easy it out.... its about 1.5cm into the head, so might be a little tricky

yeah, thats similar to the thing i got from bunnings the other day.. havent used it yet... either way, i am f**ked... i have to either drill and re-thread the hole and use a bigger bolt, or try using an easy out.... but the main question is Does anyone have a spare cam bracket bolt i can purchase off them, or a part number for nissan... (or will they only sell me a pack of more than 1?)

i was tightning them with 1 hand until it was firm and then pop..... i thought the valve or whatever it was called was going down but no, the bolt broke.... anyone have a spare bolt for the cam brackets? or will nissan charge me like $94.86 for 14 of them i dont need?

hi all installing the cams today i snapped one of the bolts that hold the bracket down.... has anyone got a spare one ? and to get the snapped bolt out i need something called an easy out? e-z-out? where can i buy that? thanks

or can i just put in some non vvt cams into it without any other modifications?