bentwagon

Were you in a Stag? Spotted Silver M35 in Kent Town

Can you post up some pics?

I take it this is what you are after. Sorry I don't have one. (That's if my phone uploaded the pic) More info here http://www.skylineowners.com/forum/showthread.php?p=1130467 http://www.gtr.co.uk/forum/110871-stagea-bumper-cover.html

If that was around 440 it would have been me. Spotted twice in one day? No hiding for me.

That was me!

Hope to see a similar pic to this soon.

As it states, I am after a wiring loom - have part and want the rest so if you have some or all let me know. Also after the plugs that connect to the fog lamps (with as much wire as possible) as these were cut off the spot light loom I have. If you know of any wreckers that have C34 stageas let me know so I can give them a call. Cheers

so it seems im missing a few parts of the loom, from what i can gather there is a 1 the loom that switchA plugs into by plug D, that then goes to earth and a plug beside the drivers foot (yup we have a plug). 2 the loom that plugs into next to the battery to the relays (plug A) 3 also missing the plug in the loom above (unknown wires) that i believe will be the same type as plug B but not sure if it should be Male or Female. Any light shed on this would be great - or even if you have these parts or a full loom laying around, i would be interested. Cheers

It's the emus I fear.

I would drive one way just for the adventure and so you can say you did it. Between Adelaide and Perth would be the most concern, but you should be ok. I use my C34 for work and have been from Mt Gambler, Coopers Pedy, Port Lincoln, Ceduna and half way across the Nullabor (separate trips) from Adelaide no worries.

You may want to have an over ride on it so you can turn it on when not in reverse, I find it handy.

I believe this is the relay setup we are trying to achieve.

Best go to some wheel places and get them to try different sizes on so you can see how it looks - most places are pretty good. Have fun.

18x8x+30 seems to be a good all-rounder. See my post #434 above. this can also be a useful guide http://www.willtheyfit.com/index.php?width=235&aspect=45&diameter=17&wheelwidth=8&offset=35&width2=235&aspect2=40&diameter2=18&wheelwidth2=7.5&offset2=42&Submit=Submit

MissDayz - I recommend going at least an 8 inch width. I had 18x7.5 with +42 offset and they were under the recommended track width (measuremen from wheel to wheel across the car). This pic shows how far in the arch they sit.

Pm sent. http://www.japaneseimportspares.com.au/nissanstageaw34aftermarketparts/

NOT SUITABLE FOR STAGEAS! I have a set of Zinik Z24 rims - 18x7.5x114.3, 5 stud, offset +42. No tyres. Has all centre caps but two are damaged and wont stay on. 2 wheels have gutter rash. Chrome inserts for the black area also supplied but some missing. Comes with set of nuts and locknuts about 1 year old. Asking $350 PM me for more details

All sorted. Thanks for your help.

more from Matt-turner Red-blue from switch to blank plug near throttle cable to yellow-red out of the two wires

Can't pm either. Email me. [email protected]

Hi May need to get some work done to my rims that may take about a week but need the car - looking to borrow some rims to get around on. Has anyone got some stockies or something they dont mind lending out to give me a hand? happy to pay rent on them. My location is in Adelaide. Please send me a PM if you can help. Cheers Aaron

Got them fitted last night, they are 350Z 18s - no problems with atessa, rear may need to be rolled just to be on the safe side.

These photos supplied by user matt-turner I've been told more to come...

Got any pics of the loom you have?

I'm going for as much info/photos as I can so this can be a good thread for others trying to sort this out too. Photos of where the plus I have labled would be great.