fergo308

I challenge any office worker to be able to say truthfully that they haven't done the same. Who gives a toss,seriously? Justin...

I have found a set of wheels,thanks to all who pm'ed me with offers. Justin...

SOLD. Justin...

Wheels are on hold pending sale. Justin...

http://s703.photobucket.com/albums/ww32/to...rco4-medium.jpg Priced for quick sale,and there's been quite a bit of interest already. Justin...

Hi all, I'm looking to sell my set of sparco mesh alloys. The wheels are 17x8" +32 offset all 'round with Yokohame A539 tyres with decent tread. PCD is 4 and 5 stud 114.3mm. Average to good condition,including all centre caps and locknuts. $400. Pm or reply here if you want them. In Sydney,local pickup only. Justin...

Hi all, I'm after some nice japanese-made wheels for my S14. Ideally I'm after a set of 17x9" +20 or similar but will consider other sets if the price and design is right. Am willing to pay up to $1500 for the right wheels,and have cash ready right now. Would prefer a Sydney pickup. Please post here or pm me with what you have and what you want for them. Justin...

Hi all, I'm after some nice japanese-made wheels for my S14. Ideally I'm after a set of 17x9" +20 or similar but will consider other sets if the price and design is right. Am willing to pay up to $1500 for the right wheels,and have cash ready right now. Would prefer a Sydney pickup. Please post here or pm me with what you have and what you want for them. Justin...

Is it worth the hassle for a 14mm increase in diameter? R34 GT-T front discs are 310x30mm. R33 GTS-t are 296x30mm. it's worthwhile for R33 owners,but not for an R34. If you went up to a 350mm disc (such as for F50 brembos) it'd be worthwhile. Justin...

My last series 2 wore out the clutch packs in second. it would occasionally flare on the 1st to 2nd shift when launching hard,and after a while would then go into limp mode and the A/T light would come on on the dash. pull over and restart,and the light would go out. eventually the clutches wore right out and I lost ALL drive one afternoon on my way home from work. Had the box rebuilt by CATS in alexandria using internals from an R34 GTT box. apparently the clutch packs in the skyline boxes are slightly larger. my current car is beginning to show the same symptoms even on std boost,so it looks like that box will be coming out before long as well. Justin...

the swtiches are only for the seat heating,in two stages,low and high,for each seat. I don't have my loom handy,and the car I drive atm doesn't appear to have the plugs for the heaters,so I can't show you any details. Justin...

How would that occur when the diff is attached to the subframe? if we were talking a live axle car,that might occur,but not in an IRS nissan. the only movement the driveline has to deal with is engine twist and a little vibration. Justin...

that's a fair price when you take labour and parts costs into account. the gearbox and clutch alone will be a third of the price. Justin...

I'm curious to see how you're going to do this. please post pics of the finished product. Justin...

I have a vented masa carbon bonnet on my S2 and the fitment is pretty damned good. only drawback was that the std bonnet struts don't bolt on. mine cost me about the same as the prices above when I imported it through someone moving back home from japan. someone really should snap them up,legal or not. they weigh about a quarter of what the std bonnet does and the finish is great. the vents dump a LOT of heat out of the bay as well. Justin...

didn't I say that already? no you can't,unless you want to change all the front sheet metal along with them. why ask if you won't listen? buy them and waste your money if you won't take my word for it,I don't care. look on yahoo auctions for some S2 std HIDs. they will bolt in and give you the performance increase you're after. Justin...

it can't be done with a std wheel. you'll need to go aftermarket if you want to space it back. Justin...

Why would you want to go backwards? besides having to swap your entire front end to make them fit,what point is there in doing that? there's no lighting performance increase to be had. you'd be better off looking for a pair of factory HID's to fit if you don't have them already. Justin...

yep,it's silver. I also have a S2 RS Four bumper available. average condition,$100 Justin...

Hi all, I have a some spares to get rid of. All parts are in Sydney's east,pick up only please. *S2 Std bonnet $150 *S2 std side mount intercooler $100 *Rear quarter window louvre trim panels,in silver $50 the pair *Space saver spare $50 Justin... 0418 663628

I fitted a nismo GT pro LSD to my S2 stagea. it came with an open centre,and the lsd transformed the feel and driveability of the car. Justin...

drop your roof linings,and you'll see that they're held on by half a dozen bolts each. you'll need to seal up the large holes left in the roof trims once you take the rails off. make up some plates or such to fill in the ~2" x 4" gaps. I took a pair off when I wrecked my first S2. - to keep as spares,not because I wanted to delete them. they're damned useful. Justin...

it's not deadlocked is it? there should be an external barrel somewhere on the tailgate. I'd be very surprised if there isn't one. Justin...

1. yes,they're interchangeable. any new R33/34 radiator will fit in,try your local performance shop,ebay,just jap etc. 2. I'd go for a newer core over an older one myself,but a 2nd hand unit will get you out of trouble now. 3. simple answer - emissions. faster warmup to operating temp means better overall emissions levels as the engine is warm and running proper fuel mixtures faster. Justin...

52mm gauges are too big to neatly fit within a DIN space. the cleanest solution is the defi DIN gauge unit. stand alone three 40mm gauges,two temps and one pressure. available in green,white or red. if you're in Sydney, revolution race gear have one in red in stock atm,$550 if I remember right. my girlfriend has one in the dash of her ae111. works very well. Justin...