dontfeelcold

1: enkei rp01 17 x 9 +22 just had them resprayed silver (matched to the original colour). There was some pitting you can see through the paint that they didn't fill in. They look nice from a couple of metres away. $900 + $50 postage Australia wide. enkei rims 2: Garret turbos for a GTR. 2860 -7 I believe. Just rebuilt by Precision Turbos. Both have brand new bearings and the exhaust housings have been ceramic coated in black. As good as new. Part numbers from the cores: HH 0110J 14411-AA403 707160-7 Part number from actuators: 430819-369 08223 35367 $1600 + $50 postage (includes insurance) turbos 3: R32 GTR Fibreglass front diffuser The one in the link is the one I bought R32 GTR diffuser $220 + $25 postage 4: Speedline 17 x 9 +25 Tyres are dead but may pass rego. I lost one centre cap on the road Comes with the centre cap tool too. usual small gutter rash $400 + $50 postage speedline 5: 4" stainless exhaust Front pipes to back only used for a short time by previous owner, catco cats on each leg of the front pipe. Will need to be welded back together. I cut it up to squeeze it in my car. $400 can be posted but unsure of postage costs. exhaust 6: r32 GTR side skirts 2 pairs both need straightening and one set needs painting, the other needs a GOOD polish just take them. 7: RB26 block with rods pistons and crank (pistons and rods removed from block) no cracks, all is in good nick. $200 8: R32 GTR Tomei dumps, the older fabricated ones BRAND NEW AND UNUSED ceramic coated black, will accept only the R32 GTR 02 sensors. provisions for exhaust temp sensors on both pipes $600 + $15 postage tomei dumps 9: used aftermarket rb26 manifolds not sure on brand, no cracks, provisions for heat shields ceramic coated black $200 + $20 postage manifolds 10: used rb26 heat shields ceramic coated $80 + $15 postage heat shields 11: R33 GTR aircon compressor sold as is $50 air con compressor 12: R33 GTR standard clutch, flywheel and pressure plate USED $50 clutch 13: N1 water pump used $50 + $12 postage 14: N1 oil pump used, not cracked $50 + $12 postage 15: ex BSM R32 GTR sump, with baffles and extended pan needs a donor sump for the diff parts $850 + postage sump 16: standard r32 gtr sump good condition $200 17: ex BSM R32 GTR Quaife front diff centre used but in good condition $1200 quaife 18: tomei pon cam replicas bought from dirtgarage (who used them for a short time) then not used by me. 260in 260ex 9.15mm lift $400 + $20 postage 19: R32 GTR fibreglass N1 bonnet lip painted in white NEW $80 lip 20: R32 GTR fibreglass N1 boot lip painted in white NEW $160 lip 21: R32 GTR Trust style fibreglass rear pods painted in white NEW $160 pods Will post at buyers expense. Pick up is available from Quakers Hill. Cheers Josh

Just wondering if anyone knows if its possible to straighten OEM R32 GTR sideskirts. I have 2 pairs that aren't quite straight and would go onto the car if they were straight. Is it possible to straighten them? If so how?

Are these off a V spec?

I am after R32 GTR air con and boot interior trim. I am after an aircon system that is know to be in excellent condition and is preferably still on the car so that it can be removed without the system getting contaminated. The boot trim needs to be complete with clips and in good condition. Located in Sydney, happy to travel for quality. Josh

Front Pipe pic

2:OS Giken Twin Plate clutch and flywheel from a 300 ZX, needs rebuilding. Was quoted $800 to rebuild. It has sprung friction plates which are 218mm in diameter and a pressed steel cover with 2 diaphragms in it. That is all I know about the clutch. $100 3: Whiteline? front strut brace, just needs a good polish, used. $50 4: Apexi "pen" turbo timer $40 includes postage 5:RB26 standard rods and pistons, in good condition. $90 7: R32 GTR Exhaust 3" mild steel and quiet. No holes or dents. $100 (pickup from Wetherill Park only) 8: R32 GTR front pipe. The usual Y shaped pipe. No holes. Has an O2 sensor bung in it. $90 Pick up from Quakers Hill after 6pm on weekdays and and anytime on the weekend. Pics are in Post 1 ,6 and 20 Josh

Radiator is on hold with a deposit. Post 16 has the items for sale revised.

bump

The r-vit is sold. Second post has a few items in it too.

bump

I am looking at getting some fibre glass N1 Sideskirts along with the bonnet vents, N1 bonnet and boot lips for my R32 GTR. I assume that the ones from JSAI, Empire Aero and Bodyform Aero are all the same so my question is how well do they fit? Does someone in Sydney have them on their car that I could come and have a look at? Thanks Josh

Bump.

Yep.

Rotors SOLD!

Wing, Hardpiping kit and the band expander GONE!

Also for sale: 1: Whiteline? front strut brace, just needs a good polish, used. $60 2: Apexi "pen" turbo timer $40 3:RB26 standard rods and pistons, in good condition. $100

The kit fits with longer silicone hoses I bought. Got your message, will call tomorrow Pic is already up

1: PWR R32 GTR radiator the end takes are 70mm thick and the core is 57mm thick. Used to start the car and then it was removed because I wanted to try a standard radiator. Standard shroud fits and the radiator goes straight in. $500 2: Autobahn hard piping kit for R32/R33/R34 GTR skylines. Includes T bolts and longer silicone joiners which I got from Plazmaman. $250 3:OS Giken Twin Plate clutch and flywheel from a 300 ZX, needs rebuilding. $100 4:Full Set of R32 GTR rotors and pads Front discs are 31mm thick, pads are 5.5mm thick Rear discs are 17.5mm thick, pads are 10m thick and look pretty much new. $150 5: Blitz R-VIT Type II - connects to the consult port, %100 working $100 6:the thing that gets Jap radios working in oz (band expander) $5 7: R32 GTR white rear wing, fair few nicks and scratches, needs touching up $50 Pick up from Quakers Hill after 6pm and weekends and pickup from Wetherill Park during work hours. Items can be posted at the buyers expense. Josh

I am after a RB26 head for cutting up. If you have one or know where I can get one, please let me know. Josh

Any progress?

Thanks for that, bring on the lazyness

I am contemplating putting a solenoid into the boot release mechanism so that my immobiliser will also unlock the boot with the second button. Has anyone else done this? Is there a solenoid and and a place to put it that works best?

Blitz R-Vit Type 2 $250 Frequency extender thingys for Jap radios - $5

Also have a Twin Plate clutch to suit a 300ZX - OS Giken TS2BD - needs a rebuild $150