mrsr32

whats a way to reattach the grill if i've broken the 2 bottom clips?

Hi I've currently got 4x inline fuse holders (jaycar type) hanging off my +ve on my battery (fuel pump, elec fan, headlights). I want to tidy it up, does anyone know of a nice multi fuse holder that isn't really big like the car audio ones? I'd like it to be discrete.

Hi Does anyone know if I can use the arms/carriers from the r33 on my r32? the r32 gts has 268x9 rear and 257x22 front's. looking at r33 297x18 rear and 296x30 fronts if i can use the arms/carriers it should mean i can bolt off the old ones and botl on the new ones without having to interchange hubs, etc?

perfect, i'll look into that.

the fuel pump for the alarm is done by the kick panel. at the boot where I've put my relay uses that wire to trigger and also have 12v from the battery feeding it, hence if you're smart you could just hotwire it there.

i've got the iginition and fuel pump immobilised, but have just rewired the fuel pump so if they were smart they could just cross the wires off the relay. what are some other good points of immobilisation? i'll ditch doing the fuel pump now because of the rewire.

is my digital heater broken? i have no option to have defrost/foot, i only have face, face/foot, foot then hit the front defrost and you can only run that with a/c or econ (I've removed a/c)

i've got the fog light switch and all it does is turn on the dash lights as it should. i've had a look in the ducts on either side of the front bumper and can't find any wiring/plugs. does anyone know where i can trace the wiring from the engine bay? or the colours too look for. i was hoping the plugs were just tucked up some where.

i've got an rb20 that has a rb25det turbo 45v3 and i've put the rb20 actuator on it, so its around .7bar. if i got an ebc or even a mbc, can i make it bring boost on any sooner?

Ok, so it looks like the latter is the better one of the 2. Had a hunt around for belmouths and there aren't any readily available. either way, its gotta be better than the stock dump. i'm interested in the gain i get vs my stock dump into 3"

does anyone know what type of switches these are? momentary open by any chance? would make for a good stealth install

doesn't that create more turbulence then?

I've got a 3" exhaust off the factory dump pipe and would like to replace the stock dump pipe with one that seperates the w/g gases. Should I go for something like this that looks like it would bolt in and replace just the stock dump pipe http://www.drivenperformance.co.nz/scripts/prodView.asp?idproduct=329 or go with a whole front pipe which seperates the wastegate for much longer (this just means I need to get my existing exhaust modified to suit)

ah, that explains why my drivers door won't set off the interior light. all the other doors still do. i'll hook it up and hopefully it brings it back to life along with the light reminder

does anyone know what is involved in converting a r32 sedan to coupe rear. i know the boot lid needs to be modified, the bumper from a coupe (does it bolt on or need to be modified), coupe tail lights (do they bolt to on and you just need to shape the bootlid?)

does anyone know what the box that is attached to the lower dash (when you take it off) is for?

does anyone know if the wiring like this can be fixed?

can anyone confirm if the coupe and sedan fuel tanks from an r32 are the same. need a replacement as mine is all rusty inside.

hi could someone tell me where all the ports on the water block/pcv that sits at the front of the intake manifold go. it has 3 water and 1 pcv to goto the intake rocker cover. i'm assuming one goes to the throttle body and the other goes into the bottom of the intake manifold by the head/injectors.

hi i've removed everything in the engine bay to do with the a/c is there anything internal to remove for the a/c as well? when you run the front demister there is no option to run it without a/c, does this affect the ecu at all?

it seems fairly normal for someone to upgrade the following for drifting in a skyline or silvia front castor arm (for more castor) rear camber arm to dial out the negative camber from lowering rear toe arm could someone please explain to me what an adjustable rear toe arm does?

yep

does anyone have issues 61 and 63, would love to have the project r32 scans out of them.