Jump to content
SAU Community

mrsr32

Members
 View Profile  See their activity

  • Posts

    223

  • Joined

  • Last visited

  • Feedback

    0%

 Content Type 

Everything posted by mrsr32

  1. mrsr32
    is it possible to replace the factory oil pressure sender with an aftermarket one or does the ecu actually use it for feedback?
  2. mrsr32
    What is the nicest way to wire the resistor to the 3 injectors in the sub harness so you can still unplug it from the main harness when pulling the motor out? I understand that for one injector you could use the existing wiring, but what about the other 2 in the sub harness. Hope that makes sense
  3. mrsr32
    what is the silver box behind the battery on an r32 gts auto, its between the plugs of the auto trans and the hicas on the chassis rail
  4. mrsr32
    going sideways primarily. i was thinking of trying to get it to 0.5 - 0 camber in the rear. car isn't lowered much probably only about 30mm, doesn't need to go over speed bumps sideways
  5. mrsr32
    i have a set of whiteline adjustable camber arms which i want to dial camber out to 0. do i need a set of traction arms as well.
  6. mrsr32
    can you fit a sub on the lefthand side of the boot in an r32? if anyone has any pics that would be great. looking at getting rid of my big box so I can fit 2 wheels in the boot and still want ot have some bass.
  7. mrsr32
    Cool, it'll mean i can get to my radiator drain easily too once its out as the big hicas hose sits right on it.
  8. mrsr32
    i've previously removed everything from the rear to the solenoids on the drivers side rail, which is where it is looped. I understand where the 3rd line on the pump is that goes to the solenoid can be removed, does it need to have a bolt plugged into it on the steering rack end once i remove it? Will jack up the car tomorrow and look at the lines, and it will probably all make sense then
  9. mrsr32
    i have my hicas looped on my r32, i have a 2 pipe pump that i want to replace the 3 pipe one with. what other piping can i remove as part of changing the pumps over?
  10. mrsr32
    has anyone got a gauge installed there? can you fit 2x 52mm?
  11. mrsr32
    Hi I've been googling around and it looks like a few people have put an rb20det plenum onto the rb25de runners. What are the advantages of this and which TB would you use (if they aren't the same).
  12. mrsr32
    i'm planning to relocate my battery to the boot on my r32, what is the best way to set it up like the r33 gts and gtr's so i can have a jump start terminal in the engine bay?
  13. mrsr32
    Can someone tell me if the plenum is the same for an r32 rb25de as the r32 rb20de/t? I want to front face one as all the ebay ones appear to be for an r33 head.
  14. mrsr32
    Can a r32 rb25de run with an r33 turbo/full exhaust, off the rb20det ecu, inj (which I think are the same as a rb25de n/a) and green maf untuned?
  15. mrsr32
    do they fit if you get a top feed rail/adapters to use top feeds? or are they too tall?
  16. mrsr32
    As usual, thanks!
  17. mrsr32
    Any tips on how to adjust some front castor rods, just replaced my eccentric bushed one with some adjustable ones. Currently have them set 5mm shorter than what I had the bushes set that.
  18. mrsr32
    does anyone know if you can use the middle/j arm and wheel carrier/hub from a r33 gts on a r32?
  19. mrsr32
    Interesting. I've had my 32 sedan w/ rb20det/manual gbox, a/c removed. it was 1323 with a full tank of gas. damn, I didn't think the sr20 was 100kg lighter than an rb. that sounds crazy
  20. mrsr32
    Thanks guys.
  21. mrsr32
    does anyone have any weight distribution of the following stock r32 gts-t (rb20det/manual box) rb25det w rb20det box rb25det w/ rb25det box rb30det w/ rb20 or rb25det box sr20 w/ sr box
  22. mrsr32
    Ok, what is the best way to fit the bar unloaded? looks like a prick to do without a drive on hoist
  23. mrsr32
    Thanks. Gotta try and sort a bolt tomorrow
  24. mrsr32
    does anyone know what size it is, mine need replacing. is it ok to drive with the sway bar held on by just the front nut on the bracket? this is a r32 gts. can you also take the sway bracket off without removing the castor rod? i couldnt get the right angles to get to the 14mm nut
  25. mrsr32
    do you run a rear strut brace? just want to know if it clears your battery
×
×
  • Create New...