Jump to content
SAU Community

Bleeding Hicas

twisted

By twisted,
in General Maintenance

 Share

Recommended Posts

twisted Enthusiast

twisted

Posted
Posted

Just wondering on how to bleed the hicas on r32 gts-t. Just changed the power steering fluid, and bled the system by jacking the car up, and running the steering through slowly, but when I went for a drive the hicas is very twitchy now when driving in a straight line at 80kmh. Will it bleed itself over time (as hicas does not opperate constantly like power steering? Never used to be twitchy like this. Any help greatly appreciated.

Link to comment
https://www.sau.com.au/forums/topic/100123-bleeding-hicas/
Share on other sites
luckydip Enthusiast

luckydip

Posted
Posted (edited)

I think there are 2 bleed nipples on rear rack. Might be worth a try as there could be an air lock in the system somewhere? When I replaced a pump recently - basically total system (front) had to be primed and everything was ok in rear before and after that.

But in long term, I agree with Josh.....

Edited by luckydip
Link to comment
https://www.sau.com.au/forums/topic/100123-bleeding-hicas/#findComment-1826067
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • Kinkstaah
      NC MX5

      By Kinkstaah · Posted

      I mean it's a bit late to say "This won't have any tangible effect and it is not worth spending more than about three seconds on it, please just enjoy the car" But I said it anyway. Does the pod actually get any airflow in that position behind a bumper like that?
    • bilbo117
      Gtr-registry.com: Now All R32/r33/r34 Gtr Details - Full Registry - Submit Photos/info

      By bilbo117 · Posted

      Hey guys - apologies for digging this up. Has this website been shutdown or is the outage temporary?
    • The Bogan
      NC MX5

      By The Bogan · Posted

      So, went shopping at Just Jap for things that might work for the intake  After some trial fitting there I ended up with a 3" x 45° silicone bend, a 3" x 300mm alloy straight, and a humped joiner, some minor trimming will be required to shorten some of the stuff, but nothing that is beyond my "ham fisted" skills The guy at Just Jap was most helpful as we had all sorts of joiners,  bends and stuff out trial fitting  Laying it out above the stuff in there it seems everything will fit nicely, and looking at it, it is probably the way I should have been looking at doing it from the beginning, probably..... In the end it is a front bar off job anyway to remove the original stuff behind the front bar that is taking up the required realestate needed, so maybe a Thursday or Friday job And because I'm a hopeless consumer, I grabbed some new steel wheel nuts, the current ones are a spline drive type with a "security" socket, that somehow someone keeps misplacing, the new ones are a basic black steel 17mm hex socket In other news: I just did my "final" tax return, I am now officially a old retired veteran pensioner, and I'm milking the system for all it's worth,  life is good
    • GTSBoy
      R33 GTST Steering Rack (49001-19U05) Rebuild?

      By GTSBoy · Posted

      I hadn't thought about the variable power steering assist. Presumably, it will always be the same level of assist as you get in an S14. The R32/3/4 are either helliishly heavy (at low speeds) if the solenoid is not powered at all, or hellishly too light (at high speed) if it is powered all the time. I presume that it is PWM controlled on those cars. I hadn't thought about the S cars not having variable assist. ugh. What crappy plebby cars they must be!  
    • Gantai
      R33 GTST Steering Rack (49001-19U05) Rebuild?

      By Gantai · Posted

      Hmm yeah that is a good point. It looks like it'll just bolt in with no real issue besides maybe the bushings being different. My other concern was that 2 pin plug that I assume is used in some way to control the rack solenoid depending on the speed signal from the ecu. The DMAX rack doesn't even have that plug though so, don't think it'll matter. Might just order the rack and see how it goes. Will update this when I figure something out
×
×
  • Create New...