Jump to content
SAU Community

Recommended Posts

RAW out of the camera, converted using DPP into 8 bit tiff, then edited in photoshop.

I also used noise ninja for the first time.

(2nd pic didn't have the noise ninja filter applied)

I used the unsharp mask. But it just made it look really bad.

So I decreased the unsharp mask a bit, and reposted the pic.

Tried a few more things, and reposted, and didn't look any better.

Tried something else (another filter) and it made it look an anime cartoon. So I decreased that filter a little and used the burn tool to make the wall in the background look a bit more "dirty anime".

Then I softened the edges of the water, softened and lightened, also to increase that drawn on look.

I don't know. I still don't like it. But eh, it's all a learning process.

The picture you see now on both ap and here is the 4th edit I've done.

I have a feeling that the extra softness in the first pic might be due to noise ninja. But then again, all my fricken shots are turning out soft.

My mate is going to bring around his kit lens later. I'll take some shots with that and see if it's any different.

To be honest I'm sick of the kit lens. I might just go out and buy a 50mm f1.4 prime and use that as a replacement to the kit lens.

I love my kit lens, probably the most versatile lens ever, I regret selling it, but oh well.

You can't use a 50mm prime as a replacement, it's just not the same, get a Tamrom 28-75, or if you want to spend a bit more money, 16-35L or 17-40L wouldn't go astray either. The 17-85 IS is a good replacement for the kit lens as well.

Noise ninja is probably the reason it's so soft, what ISO were you using? If you stay below 800, the 300d is usually pretty good with noise.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Hey guys Long time lurker, I daily a nm35 stagea 250t rs four and I've had it for almost 2 years (very reliable 👌). Issues or just looking for information ill always find myself here having a read, so thought id join.  3inch stainless intake, pod filter, AM performance turbo dump pipe, 3inch hotdog, 3 and half inch stainless to 3 and half inch AM performance blast pipes. Bc racing coilovers. 18inch rims Hdi intercooler and trans cooler soon.  Here's my car
    • thanks for the advice on the box... i was thinking the 6 speed was better for cruising on the highway but on closer inspection and comparison the Rb 5 speed box was not too different...  So the choice is going to be the RB25 box... if I can save up and find one at the right price  
    • Thanks Matt, yes that's what i am aiming for. Just going to apply the right voltage and grounds to the dash connector. Hence my search for these pins... any chance you know if these pins are in the same spot as the ones on the S15 Dash connector? as mentioned above on page 8?
    • Yes, unfortunately that's the one. Signal was noisy to begin with; after driving once and looking back at the logs I saw pressure constantly swinging between 0-200psi, or staying at 0 randomly for a few seconds. There's a lot of good sensors that share the same look and feel, so don't presume they're all bad. I bought mine for 20$ off Amazon and I should have read the reviews prior, as it's clear they're junk.  I purchased a lowdollerr motorsports sensor. 
    • wedding eh.....I seem to get to more funerals than weddings or christenings these days....
×
×
  • Create New...