Jump to content
SAU Community

Recommended Posts

Does anybody have the box, etc lying around and know the part number for the RB20DET slave cylinder?

I went to repco today, and they were not sure of the exact one, even though they had some close guesses. Anybody know for sure?

I believe its PBR brand.

Link to comment
https://www.sau.com.au/forums/topic/100459-pbr-slave-cylinder-part-number/
Share on other sites

PBR don't do one for the R32 as far as I'm aware..

Its another brand..

I replaced mine, slave w around $40, the master cyl was $75 or there abouts. I will try and find the pics I took of the part number(s).

I think I listed the part numbers in an SA thread I made a while back.

Edited by Cubes

Called the distributor (IBS not PBR), and they pointed me in the direction of a stockist in my area.

IBS-JB4215 was the part number which was compatible with my old one..

http://www.indbrake.com.au/ -- call for distributors in your state.

Cost was $33 ;) Can't beat that for a brand new unit.

You will need to use your existing 'pin' out of the old one, or you should be able to easily find something else suitable.

Remove the center box while your replacing the master cylinder.

Bend the line from the master cyl back on its self so it connects directly to the rubber slave cyl line.

I found pedal feel to be much better with a ceramic clutch, I am now able to slip it and have more control over fine movements.

Prior it felt I was a blind man. :P

Bleeding is also much easier.

Edited by Cubes
  • 11 months later...
Called the distributor (IBS not PBR), and they pointed me in the direction of a stockist in my area.

IBS-JB4215 was the part number which was compatible with my old one..

http://www.indbrake.com.au/ -- call for distributors in your state.

Cost was $33 :/ Can't beat that for a brand new unit.

You will need to use your existing 'pin' out of the old one, or you should be able to easily find something else suitable.

Just thought I'd confirm this is the correct part number, I got one today. R32 GTST Slave cylinder...

Called the distributor (IBS not PBR), and they pointed me in the direction of a stockist in my area.

IBS-JB4215 was the part number which was compatible with my old one..

http://www.indbrake.com.au/ -- call for distributors in your state.

Cost was $33 :( Can't beat that for a brand new unit.

You will need to use your existing 'pin' out of the old one, or you should be able to easily find something else suitable.

Maybe try JB4215 for PBR?? Just a idea??

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Sounds more like what Brad said, that it's mainly transfer. What pad bed in procedure did you use, and did you replace/machine the rotors, or just swap pads?
    • The stutter is almost entirely in the pedal. I don't feel the brakes release and reapply as you would with ABS engaging but the pedal feels that way, without the brakes releasing. It only lasts for less than a second and the pedal is fine again. It's hard to explain, sorry.  I'll get under this weekend and just double check everything is tight. Fluid is at max where I left it.
    • What bedding in procedure did you use?   When you say stutter, what exactly do you mean? Like it feels like someone letting go of the brakes momentarily and regrabbing them again to get you to stop? Re-reading your post, and that is what it kind of makes me think you're explaining, like theres a little bit of a jolt, likely just as you're reaching a stop. I've only had this issue once. And if its caused by what caused mine, you will want to get the car up on stands again and check it over. Mine was a case of a caliper mounting bolt coming out and letting the caliper rotate on the other remaining bolt and gave play in a wheel as it came to a stop. But not every stop either!
    • Yeop... binned it   This will be a summary will not many pics atm and cbf  Fixed the samsonas - it was totally munched Put a new precision 7675 T4 on with proper split pulse mani Got to Sydney to get to car - drove to canberra to get racecar - drive back to sydney that night Next day all day at Plasmaman putting on new clamps cleaning some things up and adding another large engine oil cooler sitting at the rear above diffuser to keep things cooler Next day - Tuesday - on Dyno - killer wikid awesome pumped out really good numbers - more mid range and on lower boost levels Wednesday - first prac - all day again getting the suspension right - had to borrow front suspension again - out do a lap come in - out do a lap - in - what i had just couldnt handle the load at the more consistent higher speeds - got a lap in at the end of the day that was pretty reasonable  Put it this way that lap wouldve had me in 4th in Pro am for the whole event - with only 700 hp and used tyres Thurs first official prac day - lap out warm up - then entered a hotlap with above setting and 80% effort took corners 1,2,3 and into 4 car felt awesome -  rear came around out of nowhere bang into the wall near front on at whatever 140 kmph Done, over, gone Just one of those how did that happen apparently as all indications show nothing out of the ordinary Got to spend the rest of the time at the event like I hadnt done before - was actually Ok mainly as I had my family and my boy is 9 and got treated like a rockstar Long trip home, lost a trailer wheel in nowhere land, X5 airbag suspension gave up half way across nullabour and rode on bumps stops (its now completely fine) had to do a 19 hr drive day on day 3 as accommodation got screwed up so just had to keep driving till found a town with some Now to reassess - hopefully the motor and other things are OK but yet to be seen too. There is no easy fix there is no i'll just order that part and get it sent - we'll have a talk to people see what can happen and what the go is but at minimum its rebuild from scratch struts forward and alot of time effort and $ should and if I return and if but maybe/ when  I have the cage tied into the front strut towers - if I didnt have that things couldnt been worse you can say its just a front end but if you know what goes into these cars... you'll know what that actually means in reality   Car was very fast. Disappointing we just didnt get to show it Effort doesnt win you races though     Apparently this is motorsport !  
    • Thanks, will do that.  Thankfully they still feel great.
×
×
  • Create New...