Jump to content
SAU Community

Recommended Posts

i was wondering if anyone else has this problem... when ever im on boost and i go over a bump in the road my rear wheels will bounce but un evenly and it cuases alot of shakes noise and discumfort not to mention the car doesnt like it much either

i was thinking it might have something to do with my LSD or rear suspention not sticking the wheels to the floor hard enough ..

please help

Link to comment
https://www.sau.com.au/forums/topic/100744-rear-wheels-tramping/
Share on other sites

Shock absorbers control the vertical movement of the wheels after the spring has been compressed (by a bump). What condition are the shocks in? You could try the old bounce test, push down on one side of the rear 4 or 5 times rapidly, and then release. It should retun to normal height without bouncing again. If it bounces its new shock absorber time. I would check the front as well, if the rear is stuffed, chances are the front is too.

If the bounce test looks OK, then my next guess would be rear subframe bushes. Have a quick look around the 4 bushes, marked in the following picture with the green dots;

R34_GT_R_Rear_Suspension.jpg

What you are looking for is signs of leaking silicone, sticky goo and split or torn rubber.

Hope that was of some help

:D cheers :D

Edited by Sydneykid

Yeh ive done the bounce test b4 and that is fine .... im at work at the moment so i cant go n look at the bushes. my cars gett8ng close to 100kms im thinking that you may be right .. i just changed the front control arms ball joins were gone maybe its time to change all thebushes aswell

Also another thing .. this only happend if im excellerating over the bumps if i roll over then no matter the speed its fine

The tyres are transmitting the acceleration and twisting torque, shocks and bushes are both relied on to hold the torque.

:D cheers :D

i took my car out for a hard thrash last night and doticed that my car is tramping a lot more now. But ive noticed a little clicking noise now, when i ease off the clutch i can hear a clicking noise coming from the rear, its like with each revolution the wheels do it clicks. (the sound is kinda like if you have a rock stuck in you treds... but there is no rock in my treads) would this be related to anything i have been worrying about.

please if someone could help me ... if i were to take my car to a suspention specialist like Heasman at Tempe would i get charged an arm n leg for them to change my bushes or should i figure out how to do it myself

i took my car out for a hard thrash last night and doticed that my car is tramping a lot more now. But ive noticed a little clicking noise now, when i ease off the clutch i can hear a clicking noise coming from the rear, its like with each revolution the wheels do it clicks. (the sound is kinda like if you have a rock stuck in you treds... but there is no rock in my treads) would this be related to anything i have been worrying about.

please if someone could help me ... if i were to take my car to a suspention specialist like Heasman at Tempe would i get charged an arm n leg for them to change my bushes or should i figure out how to do it myself

Get a quote

:rofl: cheers :rofl:

Do the pineapples provide enough reinforcement to hold the subframe if the origional bushes are or even worse WERE leaking.

Mine tramps like nothing on earth, on the dyno standing next to the car I could see the left rear wheel and subframe attached pull forward.

I'm about to throw a set of bushes through the front and sort out the subframe bushes, Sk you will receive a PM shortly. :P

Noltec do subframe bushes for the R32's, they can be had from UAS for ~$190, but as mentioned are a pain in the arse to get out for the usual home mechanic.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Oh, also, forgot to add these photos I believe.
    • Thought i'd update on this. I was able to get in contact with Craig Lieberman and later on Darryl Alison (owner of Kaizo Industries). Darryl was able to help me verify that my car was in fact one of theirs and is helping me find more info on mine !
    • There's restrictor pills in the stock boost control hoses. That's how they set the amount that was bled off and hence the "high" boost setting. The usual mod in the day was to remove it and send the "high" boost setting up to about 14 psi.
    • Thanks Duncan, that's the best info I've read. Furthermore after learning about the PCM programming side controlling the factory boost solenoid, the purpose of the solenoid is to "bleed" boost when pin 25 is earthed, thus allowing spring pressure in the wastegate actuator to overcome diaphragm boost pressure, thus closing or reducing the position of the wastegate flap creating more boost as the turbo is able to spin faster. It's pretty cool to see a designated Pill to do exactly this, would have liked to have seen it with a tiny filter over the end for those moments in vacuum.  The constant bleed pill has now been removed completely from the system and solenoid boost control has been restored once again.   Case closed 😂
    • The wideband reading is meaningless if it's not running. Why are you using shitty old sidefeeds on any engine, let alone a Neo? What manifold and fuel rail are you using to achieve that? Beyond that, can't help you with AEM stuff as I've never been their ECU/CAS combo.
×
×
  • Create New...