Jump to content
SAU Community

Recommended Posts

How many people would be interested in AP racing brake kits for their Stageas?

They do Skyline kits that use:

Front

AP racing 4 pot callipers

DBA 5000 series rotors

Mounting Brackets

Braded hoses

RRP $2,900

Rear

AP racing 4 pot callipers

DBA 4000 series rotors

Mounting brackets

Braded hoses

$2,600

I would get a set to fit on my car first to make sure it all fits on and works correctly.

I have not spoken the importer about it yet but should be able to organise a reasonable saving.

I would like to get an idea on how many would seriously be interested before

talking to them.

Link to comment
https://www.sau.com.au/forums/topic/100761-eoi-ap-racing-brake-kits/
Share on other sites

God dam, stupid car, eats the money :)

Count me in, what caliper is it? CP5200?

Also, I think you left out the fact that it comes with Ferodo DS2500...right?

Get back to me about the best prices you can get, then ill see how I can shift funding.

Would be great if you test them out first, as I have to buy new wheels if i want new brakes.... +1500$ for me... so lets try to get those prices down heaps :)

no thanks. I know how good Ap gear is,but for that price,it's just not feasible for me. I'd fit GTR brembos (especially as I already have a pair of R34 rear lined up) with two piece project mu discs up front,ferodo pads all 'round and would still have enough cash left over for a cheap set of wheels and half decent tyres to go over the top of them.

thanks for the offer though.

Justin...

AP 4's are an improvement over Brembo 4's but nothing drastic, hence they go for the 6 pots....which the kits are ~5k

Though, AP 4's will be a BIG improvement over the crappy 2 piston floaters.

The difference between the AP kit and brembos is that brembos are used..unknown conditoons, expensive to rebuild etc.

AP's are BRAND NEW, warranty etc etc

Make your own choice really.

Full Brembo set of calipers ~1500

Discs to suit ~1000

Pads ~500

braided lines ~400

So thats $3400 there

AP's

Kit ~2900

GTST rears/Discs/pads ~200/400/200

Same price really....

bugger bugger bugger, i would have been in for sure, except i got r34 brembo calipers brand new and dba 5000 rotors, which aint cheap :) got some r32 gtr 4 spot rear calipers and dba 4000 rotors for rears also, so im all set, but....

the AP racing ones are a bargain, and definately better value than brembos :)

cheers

Brad

And sti brembo's fit  skylines???

if so very interesting ... might have stopping power sooner than l thought.

sorry STAGEN, I don't know. You can probably dummy fit them and see if it works, or take the measurements of mounts and see if they match a skyline offset. If you try it, and it works out, let us know :(

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • 9" wheels are a little too wide for a RWD 32. They can fit. People have put R33 GTR wheels on 32s for years and years. But they are a very tight squeeze. This has been known for about 30 years. As I said - there is no difference between a 17 and an 18 in terms of what will fit. The rolling diameter needs to stay about the same as stock - not very much larger. If you increase that, you will start to have problems. If you increae rolling diamater at the same time as yo increase width, you will have problems earlier. as 9" wheels are pushing the boundaries already, you would need to be careful with tyre choice. I would put 8.5s on the front of mine, but would expect problems with 9s.
    • post up screen shots of your injector tables
    • Diagnostic flow for a code 21 says check signal at the ECU pins, on a voltmeter of some kind it should read 0.1V at idle, 0.12V cranking, 0.15-0.25V at 2000 rpm. Check each coil such that +1, -3 is infinite or very high resistance, -3, +2 should do the same. (-1, +3), (+3, -2), (+1, -2), and (-1, +2) should all be somewhere between 0 ohms and high resistance. If you trace the path from the coil pin all the way back to the ECU in the diagram the resistance you measure at the coil vs connected to the harness should be pretty much the same. 
    • I have an elite 2500 running an adapter harness on an rb25de neo r34. I took the butterfly out and removed all that junk. But I also went Plus+t at the same time. The butterfly thing works in reverse to the boost solenoid on the Gtt if that makes sense
    • yeh they are 235/45/17 up front and 255/40/17 in the rears. I still didn't get my answer if i can fit a 18x9 up front. I want to get 4 of this and see if they will fit before committing as they didn't see an 18x8 as an option but there is a 18x9.5 also.   Enkei RS05-RR 18x9 35mm ET 5x114.3 75.0 Bore Matte Gunmetal Wheel
×
×
  • Create New...