Jump to content
SAU Community

Recommended Posts

I have some parts off my old GTR that I want to get rid of as Im in a need of quick cash

Original Recaro seat with a BRIDE rail with slight wear. Fits straight into R32 R33 and cefiro $180 (Rail alone costs more than that)

OS Giken twin plate clutch with OS Giken flywheel.

Clutch has about 65% left on the pads. You can still get plenty of use out of it or rebuild it if you want. Very easy clutch to drive. Fits R32 GTR or R33 GTSt

$500

Nardi steering wheel with boss kit for a R32

$140 (boss kit alone costs $80)

2 GoodYear Eagle F1 tyres only been driven on 2-3 times then taken off

my brothers car as the front ones would scrape on the front guards.

Very good tyres cost around 250 new 17inch 45/235

$300 for the pair

KSP engineering 3.5 inch stainless exhaust with 4.5inch tip

has been bent a little from when my car was hit.

Exhaust shop should be able to fix it

$130

post-14428-1136529560.jpgpost-14428-1136528941.jpgpost-14428-1136529035.jpgpost-14428-1136529123.jpgpost-14428-1136529307.jpgpost-14428-1136529640.jpgpost-14428-1136529721.jpg

post-14428-1136529415.jpg

Link to comment
https://www.sau.com.au/forums/topic/100910-bargain-parts-r32/
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • I seem to the be only person that is using a Haltech 2500 on an NA motor, I've installed a Bosch DBW throttle body to the OEM intake manifold and am having problems maintaining AFR even with the wideband o2.  It will run extremely rich at idle and up to redline, but under load it will go extremely lean in the 20s and i'm essentially having to rev it over 4k and feather the clutch to get it up to speed.  I've read a few other threads of about the butterfly, it seems removing the vacuum to it is supposed to have it remain open, i've noticed no difference under 4k with the vacuum line to it plugged.  I'm hoping someone here has had luck using the NA manifold with Haltech, and if they happen to have a tune for it.  
    • I don't know any details, but I really wouldn't be surprised if they do it as a LHD only version, at least initially.
    • Thanks for the replies everyone. Definitely a coolant push. Oil catch can is empty and always has been. As the engine is out now I'll be having a good look over things. I do have some detonation on the piston tops from a trigger issue back about 5 years ago. I felt it and shut off then bought a new ecu and changed the trigger. Never been an issue since. It never hurt the power, its made almost 80hp more since that incident but I will pull the bearing caps to take a look. If the bearings are damaged I will do a bottom end refresh. Head is being re conditioned at the moment and the block will be cleaned and checked to ensure it's flat. I'll go with a kameari gasket and see how it ends up. The other thing I'm not super keen on is the cylinder colours. I suspect this is from the inlet manifold. The plan will be to put it back together, retune and then stick a plazmaman billet inlet on it and retune. I'm happy with the power, if it makes a little more, then great, but I would rather just make everything more efficient at this stage.
    • Maybe they'll look to do a bunch of presales to help inject some cash fast for their financial issues...
    • Does it also misfire equally when revving?   Josh is very correct in what you should do. The coilpack harness wiring loom itself is a known problem due to its age and the number of heat cycles it has gone through. Throwing parts at a vehicle to diagnose the issue isn't a smart or good way to do it. Secondly, you may have a bad coil pack, you pop replacements in, they fix that issue, but messing with the harness breaks it, so the issue persists. So now you think "well it wasn't the coil packs" and have to continue chasing your tail, potentially swapping back in your shit coil packs and returning the good ones (yes, I've seen people do this because 'it wasn't the problem' and they want to save money). And suddenly, you've got two issues with the same symptoms...   Diagnose, don't use the spare parts shotgun.
×
×
  • Create New...