Jump to content
SAU Community

Recommended Posts

they arer legal as long as u dont go over 6000K, anything below is ok.

My r34 GTT has HID in it, im looking to upgrade to those 8000K or somethin higher, cept the price and the illegal part scares me off.

Edited by Silver_R34_GT-T
Link to comment
https://www.sau.com.au/forums/topic/100928-hid/#findComment-1843564
Share on other sites

hi guys

as far as i know they are still not legal as they are non adjustable!!! Wierd cause an r34 GTR head lights are adjustable yet you still have to take them off to get them complianced another contradiction in QLD Transport rulings.

cheers

they need to be self leveling and have washers to be compliant,interior adjuster for load is not enough,if 34`s had same set up as honda,bmw,volvo etc ...self leveling device in boot and h/light washers they would comply.Thats ADR rules.. nothing to do with qld transport really,not sure if they would know difference between self leveling and non adjustable though once the car is registered: :(

Link to comment
https://www.sau.com.au/forums/topic/100928-hid/#findComment-1843609
Share on other sites

can someone explain to me what self leveling n have washers mean??

does it mean the bulbs move as the car goes up or down a hill. n also the bulbs wash themselves? wtf?

if you ever noticed oncoming bmw etc you will see xenon h/lights "changing colour" type thing as they approach...this is lamp adjusting to roadsurface ..leveling,

the washers are the same as windscreen washers but mounted in bar and face the h/lights for cleaning

Link to comment
https://www.sau.com.au/forums/topic/100928-hid/#findComment-1844893
Share on other sites

ahh ok, but y do HID need the washers and normal lights dont?

Correct me if i'm wrong but this was what i was told, when headlamps equipped with HID are dirty they do not give out as much light hence poorer visibility, compared to normal halogens.

Link to comment
https://www.sau.com.au/forums/topic/100928-hid/#findComment-1845719
Share on other sites

humm thats not really correct.. the plastic lens / glass gets discoloured because people use high temperature globes / cheap hid's that dont have UV cut in them.. hense the discolouration... you can polish 80% of it out using meguires plastic X polish and cleaner.or brasso if you have the time.. . i have hid in my 33 both of them gtr n gtst .. ones 6500K the other is 8000K have been pulled over many times but they never mentioned the light ,im not saying they are legal.. depends on cops decresion

Link to comment
https://www.sau.com.au/forums/topic/100928-hid/#findComment-1849624
Share on other sites

thx for all reply and suggestion! as you guys already know that the HID is very bright light specially at the night (skyline + HID = eyes catcher ), so I have a little bit worries after I put the HID in my car, the cops will always say "hi" to me on the road.... :(

Link to comment
https://www.sau.com.au/forums/topic/100928-hid/#findComment-1854298
Share on other sites

We sell GE HIDs to many companies and have never had a problem with Legality.

Officially, ADR requires Auto leveling and headlamp washers fitted for HIDs.

Auto leveling adjusts the level of headlight depending on number of passengers (as passengers at the back lifts the front of the car). They do not level as the car drives along. They reason why BMWs change colour is due to the projector they use. (its like a rainbow effect, light coming from the side of the projector has the shortest wave length hence blue)

Washers are used to keep headlight free from ice. As you can imaging, snow and ice and reflect alot of light and this can cause HIDs to be "glary".

ADRs regarding HIDs are copied directly from the european ECE 37 regulations. In Europe, some counties do have lots of snow and hence the washers, however, they are useless in most parts of Australia.

In US and JAP, HIDs don't need to be self leveling or washers. However, this is soon to change.

Link to comment
https://www.sau.com.au/forums/topic/100928-hid/#findComment-1867116
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Food for thought, the stock oil filter thread is a 3/4-16 UNF, which has an ID of about 10 to 12mm (according to ChatGPT lol). Now compare than to an 10AN, which has an ID of about 14mm (Raceworks is 14.2mm, Speed flow is 14.27mm).  
    • Yep, totally get that. However hooking in for Generator back up is only a few hundred bucks for the wiring. You could put a couple of those in (for different circuits explicitly) and run a couple of baby generators. Bonus, you can balance them across different circuits, and now have backups in your backup. I'm looking at buying places that won't even have water etc, and I don't mind the idea of getting off the electric grid either, even with everything you've said. This country already has enough power outages that even the mains grid isn't that reliable anymore. I do agree though on spending a bit more to get better gear, and to add some extra redundancy in to the system too.
    • You can set hard reserves on your battery system, and it can't be discharged past that.  
    • That sounds like an excellent idea. But total self-sufficiency means exactly that. You have no-one else to blame when your system faults out and you have no power for a week or two while it gets fixed. You'd have to go the whole hog and get a diesel genny and all the switchover gear, to get you through such times. And, despite the fact that over 20 years, my system has been pretty reliable**, I have seen so many inverter explosions (or less dramatic deaths), panel and roof JB fires, and so on, over that time, to know that the stuff is the same as any other bulk Chinese manufactured stuff. The failure rate is well above zero - both on the equipment and on behalf of the meth addled installation labour force. And then..... warranty and means of redress against the supplier you bought the gear from. Best I can tell is that only a handful of solar companies are still around within 5 years of starting their advertising pitch. They disappear and phoenix like crazy. So, as per 1st paragraph, I suspect the only way to is go balls deep and spend maybe 2-3 times as much as you might think, so that you have every base covered. Plus, know and understand your gear intimately, so you can diagnose problems, sort them out yourself, etc, etc. Plus, probably have to consider upgrading various parts as the years pass, to maintain compatibility with newer stuff, performance and reliability, etc, etc. Whereas, remaining attached to the grid has an ongoing cost that keeps going up even if you use bugger all power from it. But it does provide the fallback in case of the worst case with your own gear. You either pay up front or as you go, I suspect.
    • Add more solar panels to the array. Call the electricity company and tell them you're moving out... Live off grid electric wise
×
×
  • Create New...