Jump to content
SAU Community

Recommended Posts

  • Replies 426
  • Created
  • Last Reply

Top Posters In This Topic

Top Posters In This Topic

Posted Images

LOL this is getting rather large.

I don't know if the police will take a liking to this at all if they see it :P

thats why it will be a good idea to let the police know about the cruise like route and destination

Hiyas, can details be PM'd to me please, for the Stagea to have a run (new 4 week old baby, not sure if I will go or not...... SLEEPY, sorry!)

Im down south, near States Rd (Morphett vale).

Brendan

I've got a mate who's keen to come as well if other cars are welcome. He will be in a crappy little (turbo) mirage.........

You mean Matt? He said he may be going on a cruise around then

im not gona thrash it...if any1 wants 2 drive like crazy, they can go ahead n let the other 'cruisers' take it easy at the back...come on every1 come!!! it will b good 2 have so many cars...

all of the cruises ive been on with sau members, every1 has driven sensibily, so im sure this will b the same.

Edited by vange

Gonna give the cop shop a call tomorrow or go down there and find out what the go is with cruises. I'll say I'm thinking of planning 1 and see what they say. Try to find out if we can get any sort of 'clearance' for an uninterupted cruise. If not then we will have to be on extra good behaviour. I just dont want to be liable for organising this cruise when something happens.............etc.

Anyways pm's will go out closer to cruise date as previously mentioned. As for other cars coming, well, i dont know it is a skylines forum therefore should be skylines.......but in the end can stop ppl from "tagging" along i guess. <_<

^^ good idea if they get too interested in dates times and locations with out thinking say feb 19th @ 12pm but tell them the barossa valley :huh:

i too arnt too keen on all other cars but looks like alot of ppls get teary eyed and sulky if we say its only skylines

Edited by Madaz

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • So stock ECU does not like anything above 10 psi?  That Nistune one is just for "try" if it will be any different, I know it need to be tune for that. I know but YOU may know about these problem but i/we dont. They few little Skylines here let alone people who know anything about tham so that is why iam asking here  
    • So now we have a radiator with no attachments whatsoever. It lifts up with a particularly tight spot between the drivers side air box mount and the lower radiator outlet, but if you've got this far you will sort that too. This is the lower mounts with the rad out so you can see where the rubber bushes go, it is a straight shot upwards Done! Assembly is the reverse of disassembly, with blood less likely to be shed.
    • Right, onto the second last trick. The Air Con condenser is mounted to the front of the radiator and stays in the car when the radiator is removed. There are 2x 10mm headed self tappers holding the top of the condenser to the radiator, remove those The bottom of the condenser is attached to the radiator with clips. You need to lift the condenser out of those clips and clear (up, then forward). f**ked if  could work out how to do that last bit with the front bumper on. I hope you can, and you share the trick.  Bumper removal probably deserves its own thread one day once I've recovered the will to live, but basically you need to remove the wheels, front inner guard liners (clips and 10mm headed bolts), the self tapper between the guard and the bumper at the rearmost point of the bumper (same as an R32 that bit), any remaining clips at the top/front of the grill, an absolute bastard design with a plate that holds the top of the bumper above the headlight each side (only 1 bolt which is tricky to get to, but the plate catches 2 places on the bumper and must be removed....carefully!) and push clips between the bumper and guard under the headlight. If you've done all that you will be faced with wiring for the fog lights on both sides and in ADM Q50 RS at least, 4 nasty tight plugs on the driver's side for the ADAS stuff. So, the clips at the bottom look like this on drivers side (looking from the front) And on the passenger side (also from the front), you can see this one is already out Clearance on both of these are super tight; the condenser needs to move up but the upper rad support mount prevents that, and the radiator can't move down far because it is (rubber) mounted. Once you achieve the impossible and drop the condenser off those mounts so it does not stop the rad moving, you are good to go
    • OK, next the shroud needs to come off and there are a couple of tricks. Firstly, there is a loom from near the passenger side headlight to the fans, coolant temp sensor etc and there is no plug to undo.  In my case I was OK to leave the shroud on top of the engine so I just undid the passenger side fan plug and about 10 of the clips which gave enough free wire to put it aside. The fan plugs were super tight, the trick I used was a small falt screwdriver to push down on the release tab, then a larger flat screwdriver to lever the plug out of the fan unit....be careful with how much force you apply! If you need to remove the shroud altogether for some reason you will have to deal with all the plugs (tight) and clips (brittle)....good luck. I removed all of the clips and replaced them with cable ties that I will just cut next time. Also, in the Red Sport / 400R at least, the intake heat exchanger reservoir hose is bolted to the shroud in 2 places with 10mm headed bolts; so remove them (the hose stays in the car; no need to undo it at the t fittings down at the radiator lower mount. Once you've dealt with the HX hose and the wiring loom, there are 3x 10mm headed self tappers holding the top of the shroud to the radiator; remove those.   The shroud then lifts out of the bottom mounts where it sits on the radiator, up and onto the engine out of the way. Simples
    • Ok, disregard my “rate them” comment, sorry for my unrealistic input
×
×
  • Create New...