Jump to content
SAU Community

Need To Borrow A Stock Air Box For Road Worthy


Recommended Posts

hey guys just bought a r33 series 2, it came with a pod filter when it was imported ive done a search and ppl are saying that if you sheild ur pod its road worthy, i just rang a place and have found out that pods are illegal sheilded or not. does any one have a stock air box i can borrow for a day? im in the se suburbs

thanks

its the EPA that handles this sort of stuff.. if you rang them they'd probably tell you and could maybe send you something in writing.

someone got a letter from them stating this and the other similar laws, they scanned it and posted it up somewhere on the forum....maybe try a search and see if you can find it

yes, by exhaust i meant modified...otherwise you wouldnt really refer to the exhaust....not many people have a fmic and stock exhaust....

haha i do

I just got back from EPA, i think the correct one is that we can only have one modification on air-intake (i.e. fmic or pod filter or bov) and the exhaust modification is ok as long as it's not over 90db and don't emit more than legal limit of pollutants.

Joe

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • There's restrictor pills in the stock boost control hoses. That's how they set the amount that was bled off and hence the "high" boost setting. The usual mod in the day was to remove it and send the "high" boost setting up to about 14 psi.
    • Thanks Duncan, that's the best info I've read. Furthermore after learning about the PCM programming side controlling the factory boost solenoid, the purpose of the solenoid is to "bleed" boost when pin 25 is earthed, thus allowing spring pressure in the wastegate actuator to overcome diaphragm boost pressure, thus closing or reducing the position of the wastegate flap creating more boost as the turbo is able to spin faster. It's pretty cool to see a designated Pill to do exactly this, would have liked to have seen it with a tiny filter over the end for those moments in vacuum.  The constant bleed pill has now been removed completely from the system and solenoid boost control has been restored once again.   Case closed 😂
    • The wideband reading is meaningless if it's not running. Why are you using shitty old sidefeeds on any engine, let alone a Neo? What manifold and fuel rail are you using to achieve that? Beyond that, can't help you with AEM stuff as I've never been their ECU/CAS combo.
    • Manual boost controllers (where a little of the boost was bled off) were quite common back in the day, because they were cheap and easy. Generally they had a manual adjustment screw rather than being fixed like yours. Down side is they always bleed boost, not just when you want them to so an electronic boost controller that uses a solenoid will have less lag.
    • Hello , im new here and i have A31 home build  RB25det neo stock eng / turbo  aem ems 2 blue connector  aem 3.5 map aem cas disk aem wideband connected to ecu  355 lph pump 550 nismo yellow injectors side feed aftermarket regulator  and won’t start with base aem tuner basic tune eventually flipped cas 180 degree so it triggers on correct stroke not in exhaust cycle  Now it won’t start Wideband reads 10 and 11 at lowest fuel setting  and will share calibrations soon for aem tuner i think something is wrong in aem tuner    please if you have any information, am very grateful         
×
×
  • Create New...