Jump to content
SAU Community

R33 Rb25det Full Engine & Gearbox

Guilt-Toy
 Share

Recommended Posts

Guilt-Toy Grand Master

Guilt-Toy

Posted
Posted

RB25DET from S1 R33 in good condition with turbo- Inlet manifold modified to have forward facing throttle body with RB25DET gearbox with clutch recently replaced with heavy duty item:

Newcastle:

Engine done 140,000km & Gearbox less k's as it was a auto conversion has no coil packs or loom - comes with standard turbo and dump which needs minor repair:

Reason for selling - Car written off:

$2850 prefer paymend on pickup:

Car had aftermarket ECU (which is sold now) so old loom can be supplied if you are using an aftermarket ecu:

Phone Anthony on 0418169145:

Will upload pictures soon.

Link to comment
https://www.sau.com.au/forums/topic/101727-r33-rb25det-full-engine-gearbox/
Share on other sites
Guilt-Toy Grand Master

Guilt-Toy

Posted
  • Author
Posted (edited)
would be interested in the engine, if you separate.. price please :P

Craved

MSG QIK32 he expressed interest in BOX. - if you guys can come up with some kinda deal to deposit the whole $2850 into my bank account then you can come and pickup the package and split the treasure :P

I can split it and ship it seperatly at buyers costs - so dont be shy come up with a solution :)

PS: I can give you a Autronic SMC for this engine tuned for an extra $1500

Edited by Guilt-Toy

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • GTSBoy
      Duncan's V37.......race car?

      By GTSBoy · Posted

      I hope it's actually possible. This is a write off in insurance world.
    • GTSBoy
      Nismo GT Pro LSD configurations

      By GTSBoy · Posted

      Yup. 2-way with shallow ramp angles. Still works.
    • Duncan
      Duncan's V37.......race car?

      By Duncan · Posted

      That was the first session so not a lot to take from the day. It was low 20s ambient and the coolant had got to 110 (and obviously had some pressure!) so that still needs to be addressed. I haven't downloaded the data yet but will. I had refilled the auto trans with Redline DT6 because it claimed the best viscosity I could find at 100o. It wasn't really long enough to get a good feel for that; while the trans got to 100o in the session it still wasn't shifting crisply as I hoped. I think I'll try a few more sessions before judging. No steering motor overheat but I'd hope not in only 1 session! But finally the suspension; it was night and day over the standard stuff and the car was a couple of seconds quicker on the same crappy tyres, which is a huge difference. I'll stick with that and get some sway bars and a mechanical diff sorted too and see how that all goes together
    • CRSKmD
      R32 Sedan - Grip and Drift (have my cake and eat it too build)

      By CRSKmD · Posted

      I guess it’s partially a compromise of how my car is used, wanting to be able to switch from drift to grip with track side on-car adjustment. Also partially with the way the knuckles are set there is more static camber but less dynamic camber gain. 
    • Duncan
      Duncan's V37.......race car?

      By Duncan · Posted

      OK, so update from the track day on Friday It was a classic "an unfortunate series of events'. There were a few cars around and when i checked my mirror coming out of the fish hook I notice some smoke from the rear of mine. Looked again and it was getting much worse, I figured I'd blown a turbo or something to got off it and pulled off the racing line. However.... since it is a left hairpin into a right kink, I was on the inside of the next corner. There was a car passing me on the left and a big drop off over the ripple strip on the right......and someone had knocked the witch's hat that was on the apex about 1m onto the track. So, between those 3, I decided to mow down the cone and not damage my car/the other car. Right choice, but surprising result.  The car decided the cone was a small pedestrian so it blew the rear bonnet hinges up to protect their head in the upcoming person to car impact....I didn't see that coming and like an airbag deployment it happened super fast. Straight into the pits from there, everything was driving fine but it became clear it was a coolant leak not smoke, it was billowing up onto the windscreen. Onto the trailer and home. I'll do a separate thread about the repair (once I work out what it is ), but the immediate problem was the bonnet wouldn't open because the front was pinched onto the front bar and would not release. Ultimately we unbolted the hinge from the bonnet, pulled it back a little and it released from the front OK. "There's your problem", the top radiator hose had popped off at the radiator.
×
×
  • Create New...