Jump to content
SAU Community

Recommended Posts

NEW Bosch/Nissan Z32 Airflow Meter.

$300

+ registered post. + $6.35

+ insurance if you wish. + $3.30

http://www.auspost.com.au/

I will only send via registered post as it provides proof. :(

If in SA pickup available

Direct Deposit only.

I can supply plugs OR you can zip down to your local wrecker and pick up a second hand item from a VL or R31 RB30E.

Providing we can get 15 plugs together they plugs can be done for an extra $10.70 each.

As the AFM is a new item from Bosch.

Bosch make the Airflow meters for Nissan.

Buy a Nissan afm and you will find Bosch/Jecs markings on it.

The Bosch Z32's RRP is $450, trade is ~$390.

From memory Nissan want ~$600 odd.

Interested Persons:

----------------

1. 4door_Sleeper - 1 AFM

2. mickr33 - 1 AFM

3. NARDI - 1 AFM

4. dangerman4 - 1 AFM

5. r32_rookier - 2 AFM's, 2 plugs

6. dacow - 1 AFM

7. Iceduck312 - 1 AFM

8. driftstick - 1 AFM, 1 plug

9. Fat32 - 1 AFM

10. Shaun - 1 AFM, 1 plug

11. Sky34 - 1 AFM, 1 plug

12. BOZ22N - 1 AFM

13. Pretender - 1 AFM, 1 plug

14. JL - 1 AFM, 1 plug

15. ausgtr - 2 AFM's, 2 plugs

16. ---- - 5 AFM's, 5 Plugs

17. YLD-CHLD - 2 AFM's, 2 plugs

18. B0oStEr - 0 AFM, 1 plug

19. Skylinecoupe - 1 AFM, 1 plug

20. clayoth - 2 AFM's, 2 plugs

21. Speed safe - 1 AFM, 1 plug

22. Predator

23. SKY34

24. Fangz

Total AFM's - 29

Total Plugs - 21

----------------

Due to a shortage of supply the group buy will not go ahead until....... Bosch are ready. :D

According to Bosch: At some stage there was a manufacturing problem that caused a lot of back orders.

They estimated they would be in surplus by the 1st of May.

Its now the 1st of May and they still have backorders.

Z32 Airflow meters are available in small numbers around various suppliers for the full price but as I said... In small numbers. The supply to these suppliers obviously takes priority over our group buy.

To my surprise, I received a call early this morning, Bosch have now pushed the date to the 1st of July.

Either way, 'eventually' our group buy will go ahead.

For a new afm that you don' t have to worry about for another 10years its an awesome price.

post-382-1137484751.jpg

post-382-1137484775.jpg

Edited by Cubes
Link to comment
https://www.sau.com.au/forums/topic/102021-eoi-new-z32-airflow-meters-300/
Share on other sites

  • Replies 134
  • Created
  • Last Reply

Top Posters In This Topic

Top Posters In This Topic

Posted Images

Possibly? I don't mean to sound harsh but I really don't want to be buggered around on this as I'm not making anything on it, in fact its costing me slightly.

For future ppls possibly interested, please be sure if you are interested or don't mention you may be. :P

Edited by Cubes

cubes, you said 'interest' i posted an interest but having re-read my post i think you misunderstood.

i need one for a current car and pending the arrival of a car from japan i might need a second....hence "possibly 2" not "possibly too".

If you have the part number you can buzz any auto parts store and they will give you a price on the Q45/VH41.

Retail for the Z32's are $450.

They can be found at trade for ~$390.

Edited by Cubes

No.. If you want the plug head down to the wrecker and grab one from a VL or R31.

I do have wiring diagrams for both the R32/R33 S1 and the R33 S2.

I don't have wiring diagrams for the GTR's. If some one does, please drop me a pm and I will grab them from you. :)

Its not rocket science though, easy to wire, you have a + feed, earth(s), signal.

Edited by Cubes

Bosch make the AFM for nissan, as NGK make the oxygen sensors for nissan.

So in short its a Bosch AFM, as is the afm you buy from nissan.

See initial thread start post for pics I've attached.

You can see to the left of the flow direction where nissan have their nissan emblem stamped.

Thats correct, you will need 2. Do you want 2?

2 RB20/25 afm would probably meet your requirements depending on power goals? 400rwkw+ will require Z32's.

Edited by Cubes

When will the deadline to pull out? I'll need to confirm with the tuner whether my AFM will maxed out with the 2535/PFC combo or whether he can get around the AFM issue.

Guest
This topic is now closed to further replies.



  • Similar Content

  • Latest Posts

    • We have a huge update coming in the next few months, version 5 of Invision will be released. I'm holding off any changes until after this change as I'm not sure what features will be removed or introduced.
    • Yeah, plenty of air flow, there is a dedicated path that feeds the air in to the OEM intake tube behind the bumper As for a "tangible effect", maybe, but getting the pod/intake air out of the hot engine bay is worth it psychologically to me, even if it gives no performance difference, so the tangible effect in my Lizard brain saysss yessss  In the end, to me a tangible effect isn't always about performance, sometimes it a sound or a look, or even a...... feeling  Ooga-Chaka Ooga-Ooga Ooga-Chaka Ooga-Ooga Ooga-Chaka Ooga-Ooga Ooga-Chaka Ooga-Ooga
    • yeah first and reverse is where you will find clutch release issues (whether hydraulic or mechanical) because the difference in revs required is the highest there; particularly changing down from 2nd to 1st when still moving. To be clearer though, it is possible that the clutch release bearing is the wrong height. This is less likely than a hydraulic issue but it is not unheard of when you are mixing and matching
    • Quite right, if you make it to that pension you deserve every cent
    • Hi all, Restoring r33 series 1 rb25det. All the heater hoses were on their way out, have replaced them and put it all back together. After testing I noticed a small leak from behind the head on the actual metal water line to the turbo when cars warm. I tried running a longer hose over it but it kept leaking...   I am about to take the (stock) manifold off again😔 to change the water line does any one have any lines they recommend? I was looking at Aeroflow Turbo Oil & Water Line Set but not sure what everyone else recommends. Car is completely stock but want to upgrade turbo eventually. it looks like ill have to disconnect a lot just to replace these lines so if there's anything else recommended to do please let me know. Thank you in advance!
×
×
  • Create New...