Jump to content
SAU Community

Recommended Posts

Hey people

I recently got a set of 19 x 8 inch rims on my R34. Now the tyres are 235/35/19 all round, and have an offset of +35 which is the same as stock. The wheels were balanced etc, but when they were put on it was discovered that a 2mm spacer was required for clearence of the front brakes due to the shape of the spokes and big ass R34 front brakes. I also put them on the rear just so all was even. I have now found that at speeds over 100kmph a get a shake in the wheel, sometimes it is only slight, other times it is pretty violent.

Do you think that becasue the wheels/tyres were balance for the +35 offset, that with the spacer bringing it down to +33 the balance is out of wack and is causing the shakes. Should i get them rebalanced and get the tyre place to attach the spacer to the machine when they balance them?

As a side note, i have not had a wheel alignment since i have had the new wheels put on, could this be causing the problem?

Any advice would be great.

Link to comment
https://www.sau.com.au/forums/topic/102085-steering-shake-with-new-rims/
Share on other sites

Although I would definitely get the wheels aligned (to ensure the best possible handling and even tread wear) I can't see this being the primary source of your vibration. Particularly if the only thing that has changed are the wheels and there was no vibration with the old ones.

It sounds as if the problem lay in the wheel balance and/or the spacers potentially affecting the state of balance.

Although this may sound silly, have you checked the wheel nuts ..... is it possible that the wheel(s) are loose?

the car is also lowered around 3 inches but this was happening before the lowering.

I don't think it is the wheel nutz as this happened from the word go. As in i got the car back from the shop on saturday afternoon (lowered with the wheels refitted, and drove out to mallala on the sunday and it was doing it. So the wheels would of still been very tight then. Wheel nuts do come loose with spacers but this is usually when it is a 10mm spacer type thing. It is not overly common on a 2mm spacer

Thanks for your input though much appriciated

It's either a slightly bent spacer or the stick on weights have come off straight away. Couldn't possibly be the wheel itself or the tyre. Balancing without the spacer wouldn't matter because like you said you have a spacer on every wheel. I'd also suggest getting a wheel alignment straight away, because i'm sure you don't want to be buying fresh tyres just around the corner!!!!

Have them balanced on the car, which will take the rotating assembly including spacer in to account.

As others mentioned, wheel nuts would have been my first point to check.

Just as a side note, the spacers are not legal, which you may or may not know or care.

chops

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Welcome to Skyline ownership. Yes, it is entirely possible parts websites get things wrong. There's a whole world of inaccuracies out there when it comes to R34 stuff (and probably 33 and 32). Lots of things that are 'just bolt on, entirely interchangable' aren't. Even between S1 and S2 R34's. Yes they have a GTT item supposedly being 296mm. This is incorrect. I would call whoever you got them from and return them and let them know the GTT actually uses 310mm rotors. Depending on where you got them from your experience and success will obviously vary.
    • Hi...a bit a "development" on the brakes. I spoke to the guys where i get brakes from...and they are saying that 296mm EBC are for R34 GT-T. I then went to their site: https://www.ebcbrakes.com/vehicle/uk-row/NISSAN/Skyline (R34)/ and search for my car(R34 GT 1998 - it has GTT brakes) and it show me this USR1229 number and they are rly 296mm rotors... So now iam rly confused... The rotors i have now on the car are 310mm asi shown... So where is the problem? Does the whole EBC got it wrong or my calipers are just...idk know what?  
    • Oh What the hell, I used to get a "are you sure you want to reply, this thread is XX months old" message. Maybe a software update remove that. My bad.
    • This is a recipe for disaster* Note: Disaster is relative. The thing that often gets lost in threads like this is what is considered acceptable poke and compromise between what one person considers 'good' looks and what someone else does. The quoted specs would sit absurdly outside the guards with the spacers mentioned and need  REALLY thin tyres and a LOT of camber AND rolling the guards to fit. Some people love this. Some people consider this a ruined car. One thing is for certain though, rolling the guards is pretty much mandatory for any 'good' fitment (of either variety). It is often the difference between any fitment remotely close to the guards. "Not to mention the rears were like a mm from hitting the coilovers." I have a question though - This spec is VERY close to what I was planning to buy relative to the inboard suspension - I have an offset measuring tool on the way to confirm it. When you say "like a mm" do you mean literally 1mm? Or 2mm? Cause that's enough clearance for me in the rear :p I actually found the more limiting factor ISNT the coilover but the actual suspension arms. Did you take a look at how close those were?
    • @GTSBoy yeah sorry i know thery are known for colors bud those DBA are too in colors 🙂 Green will be good enough for me  
×
×
  • Create New...