Jump to content
SAU Community

Recommended Posts

OK team, found this guage in my glovebox when I picked up the Stagea (Series II). Assuming it was removed from the A pillar so that vehicle could pass compliance.

Anybody seen them before, got one, know anything about them???

Any info would be helpful.

post-18577-1137492491.jpg

Link to comment
https://www.sau.com.au/forums/topic/102230-glovebox-contents/
Share on other sites

Hi Marc,

Looks like a pretty cool tacho to me. Wonder whether mine will have any nice surpises in the glovebox! B)

Talked to the dealer today, looks like my Stagea is being held up on the docks :-( Still, allows me time to go through all the posts and learn a whole lot more.

Cheers

it may be a DAYZ gauge as i have seen photos of a DAYZ s2 rs four s with a gauge on the a pillar... i will try and find the URL

Thanks people.

Now that it is out of the glovebox and space is available, I can start planning on installing the Jaycar IEBC, DFA and Hand Controller plus the APEXI SITC. (All have been sitting in my office for 3 plus months).

It will be interesting to see how things 'tick along' with the split dump 3" exhaust and 4" cat.

  • 2 weeks later...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • The 296mm rotors are the R33 turbo brakes. The 310mm rotors are the R34 turbo brakes. The calipers are nearly the same, but not. They're the same caliper but the R34 caliper has longer legs so that it sits out far enough to go over the rotor. The pads are the same for both. When you say, "I bough tsome EBC"....did you just mean pads? Or rotors? 310mm rotors fit under 17" wheels. There may be some wheels without enough clearance though. I can't fit my fingers between the barrel of my wheel and the "corners" of my R34 calipers, but there is plenty of room behind the spokes. This is on Enkei RPF1. You can fit 324mm rotors inside a 17" wheel, but I'd be willing to bet that it would be close to impossible with the Nissan/Sumitomo caliper (using an adapter, of course), because the Sumitomo caliper is fatter than the Brembo caliper that is supposed to go on the 324mm rotors.
    • Hi. Can someone tell me what brakes(and mainly WHERE) can i buy brakes on R34 GTT? I bought some EBC which SHOULD go on my car(i have GT but it has GTT brakes) but it does not fit, Brakes are "too" small(296mm) Are 310mm be good or? I have 17 inch wheel so no "big boys" but for me driving i just need one that fits and i can get here in EU/Czech.
    • Since winter isn't that harsh anymore in Poland, i will definetely drive it 365 days a year 😉. But if the snow hits i will try it for sure and let U know. Only swap i am planning to do is of course R34 GTR front 😍.
    • Hey. Very valuable information about pitwork, I will pay attention when buying any consumable parts 🙏 As for the carpets - I got a handful of information from nengun, from which it appears that indeed the carpets for the driver's side are OEM. They are not able to show me any pictures due to the long chain of different sales entities but after I place the order, as soon as the goods arrive at the nengun warehouse from which they will send the shipment to me they can send me photos and if my purchase differs from OEM I can immediately return it / cancel the purchase. I think I will give it a try 😉. Of course i'll let you know what's what as soon as i get them P.s. I know the topic is not relevant to the thread, but both nengun and amayama have these SICK 😍 trunk room lamps available. Do you know anyone who ordered them? I need to have one in my car
    • I've managed to find this: Nissan_Stagea_AutechVersion260RS (1).pdf
×
×
  • Create New...