Jump to content
SAU Community

Recommended Posts

Just been offered to sell my R32 GTR without any running gear so I thought id post here and see if anyone is interested in my GTR running gear. Here goes, ive tried to list everything if i missed or something isnt listed please ask me

Engine

RB26 Head

Mild Port and Polish

Modified for Big Boost

HKS 272 Cams IN/EX

HKS Cam Gears

Full Head Service (new guides etc)

ARP Head Stud Kit

RB30 Bottom End (CR 9.01:)

Forged Pistons by CP

Bored to 86.5mm

Line Bored

Decked

Forged Forged Rods (RB30 not modified SBC ones)

ACL Hardened Bearings

O-Ringed Block

Fully Balanced

Crank fitted with oil pump collar

R33 GTR Oil Pump

4WD Sump Adapter

Mofied Sump Pickup

Oil Restrictors

New gaskets

RB26 Balancer

Oil Cooler with lines and adapter

Drive Train

Rebuilt R33 GTR Gearbox with OS Giken Gear Set and New Synchros and Bearings COST ME OVER $6000

Exedy Twin plate Clutch and Flywheel (used)

Inlet/Exhaust

Garrett T04Z Ball Bearing Turbo

6BOOST Exhaust Manifold

Sub Zero 55mm Wastegate

ARC Airbox (HPC Chrome Coated)

Q45 90mm AFM with Plug

GTR Throttle Bodies (rebuilt)

GTR Plenum (HPC Chrome Coated)

100mm Intercooler

HKS Intercooler Piping (needs modificaton)

Aluminium Radiator (used)

Fuel System

Bosch 044 Fuel Pump

Bosch 910 Lift Pump

2.5lt Surge Tank

Sard 700cc Injectors

Nismo Fuel Reg (used)

Misc

Power FC with Controller

PowerFC Boost Controller

Solid Engine Mounts

Solid Gearbox Mount

Looking for serious offers around $22,000.

Please note that the entire Running Gear is brand new unless stated and has never been fitted to a car.

The engine will be supplied fully assembled and ready to drop into your GTR or other car for that matter. The rest can be done by any decent mechanic or workshop.

Please PM for more info

!!!!! WILL NOT SEPERATE PARTS !!!!!

Edited by NissanFreak
Link to comment
https://www.sau.com.au/forums/topic/102503-gtr-running-gear-700hp-brand-new/
Share on other sites

Seems no-one is interested then

post up pics of the items so you can generate more interest.

new users selling top $$ stuff normally get ignored.

prove to ppl that your the real deal and you may sell your gear.

DirtGarage: i understand and take what you say into account. But as stated the engine is currently being assembled and to take pics of all the parts individually would be hard since there would be a shit load of images. I have tried to list the engine and accessories in as much detail as possible.

Serious buyers are more than welcome to speak to the engine and gearbox builders to confirm the goods are what i say they are

Cheers

DirtGarage: i understand and take what you say into account. But as stated the engine is currently being assembled and to take pics of all the parts individually would be hard since there would be a shit load of images.  I have tried to list the engine and accessories in as much detail as possible.

Serious buyers are more than welcome to speak to the engine and gearbox builders to confirm the goods are what i say they are

Cheers

thanks mate...just tryin' to help...but...a picture does tell 1000 words

People, ive been made some offers of less than $5k for the gearbox, if i am to sell it the buyer needs to produce $5000 otherwise please dont make offers.

Thanks

Yes, as soon as i get the engine back i will bolt up as much as i can and take a picture

can i ask who is building the engine...and who did the assembly on the gearbox?

Guest
This topic is now closed to further replies.


  • Similar Content

  • Latest Posts

    • Yeah good luck out there! Will be good to see a mighty GTST going harder than the GTRs
    • i will be there 😁
    • Hello!  i just finished manual swaping my r34 skyline with a r33 rb20de box(RB71C)box  When the car is running it squeaks crazy loud and it was smoking from the gearbox area. The gearbox is fine it was tested. The clutch slave cylinder seems like it doesn't fully releases the clutch. I want to ask if this noise is from the throw out bearing or could it be the clutch assembly or disk att.xFliq87Gzw6kImKBVqDebXkj0fBqymk0JaYeP3_3SlM.mp4
    • A few small updates since the previous post and lessons. I decided to do a little interior light upgrade on the 110. I quite like the iilumo items, even if they're a bit of a premium over other brands. You'll also note the Stedi Fogs, that will go into the S15 fog lights as I needed to match the bulbs since I got the new ones earlier. I hope they fit as the body is quite a bit longer than your normal bulb.  Annoyingly, I managed to trip the fuse, which normally wouldn't be an issue until I located the fuse. I can't say I've ever come across this. I had lucked out that someone nearby had a spare, but oddly enough Toyota dealerships seem to keep this in stock. I ordered some to keep in my stash and as luck would have it, someone else nearby tripped the same fuse so I passed on the favour.  I also did a little service on the 110 ahead of some additional work coming up. It's been annoying that Goleby's stopped carrying this particular HKS filter for the 110, so now I need to keep them on order from Japan. I also took the opportunity to install a bash plate and number plate riser. The plate riser is such a cheap but nice fix to help really tidy up the car. I'm tempted to now also replace my headlights, on this car. Both items were from Project Aero.    I also needed to replace the rear tyres on the 110, and after trying to get it aligned learnt that I need to replace some bushes in the front end, so that's next.  Closing out this update with a nicer picture as always! 
    • Yeah mate, never miss it.
×
×
  • Create New...