Jump to content
SAU Community

Gtr Running Gear 700+hp Brand New

NissanFreak
 Share

Recommended Posts

NissanFreak Collaborator

NissanFreak

Posted
Posted (edited)

Just been offered to sell my R32 GTR without any running gear so I thought id post here and see if anyone is interested in my GTR running gear. Here goes, ive tried to list everything if i missed or something isnt listed please ask me

Engine

RB26 Head

Mild Port and Polish

Modified for Big Boost

HKS 272 Cams IN/EX

HKS Cam Gears

Full Head Service (new guides etc)

ARP Head Stud Kit

RB30 Bottom End (CR 9.01:)

Forged Pistons by CP

Bored to 86.5mm

Line Bored

Decked

Forged Forged Rods (RB30 not modified SBC ones)

ACL Hardened Bearings

O-Ringed Block

Fully Balanced

Crank fitted with oil pump collar

R33 GTR Oil Pump

4WD Sump Adapter

Mofied Sump Pickup

Oil Restrictors

New gaskets

RB26 Balancer

Oil Cooler with lines and adapter

Drive Train

Rebuilt R33 GTR Gearbox with OS Giken Gear Set and New Synchros and Bearings COST ME OVER $6000

Exedy Twin plate Clutch and Flywheel (used)

Inlet/Exhaust

Garrett T04Z Ball Bearing Turbo

6BOOST Exhaust Manifold

Sub Zero 55mm Wastegate

ARC Airbox (HPC Chrome Coated)

Q45 90mm AFM with Plug

GTR Throttle Bodies (rebuilt)

GTR Plenum (HPC Chrome Coated)

100mm Intercooler

HKS Intercooler Piping (needs modificaton)

Aluminium Radiator (used)

Fuel System

Bosch 044 Fuel Pump

Bosch 910 Lift Pump

2.5lt Surge Tank

Sard 700cc Injectors

Nismo Fuel Reg (used)

Misc

Power FC with Controller

PowerFC Boost Controller

Solid Engine Mounts

Solid Gearbox Mount

Looking for serious offers around $22,000.

Please note that the entire Running Gear is brand new unless stated and has never been fitted to a car.

The engine will be supplied fully assembled and ready to drop into your GTR or other car for that matter. The rest can be done by any decent mechanic or workshop.

Please PM for more info

!!!!! WILL NOT SEPERATE PARTS !!!!!

Edited by NissanFreak
Link to comment
https://www.sau.com.au/forums/topic/102503-gtr-running-gear-700hp-brand-new/
Share on other sites
Swiper the Fox Grand Master

Swiper the Fox

Posted
Posted
Seems no-one is interested then

post up pics of the items so you can generate more interest.

new users selling top $$ stuff normally get ignored.

prove to ppl that your the real deal and you may sell your gear.

NissanFreak Collaborator

NissanFreak

Posted
  • Author
Posted

DirtGarage: i understand and take what you say into account. But as stated the engine is currently being assembled and to take pics of all the parts individually would be hard since there would be a shit load of images. I have tried to list the engine and accessories in as much detail as possible.

Serious buyers are more than welcome to speak to the engine and gearbox builders to confirm the goods are what i say they are

Cheers

Swiper the Fox Grand Master

Swiper the Fox

Posted
Posted
DirtGarage: i understand and take what you say into account. But as stated the engine is currently being assembled and to take pics of all the parts individually would be hard since there would be a shit load of images.  I have tried to list the engine and accessories in as much detail as possible.

Serious buyers are more than welcome to speak to the engine and gearbox builders to confirm the goods are what i say they are

Cheers

thanks mate...just tryin' to help...but...a picture does tell 1000 words

NissanFreak Collaborator

NissanFreak

Posted
  • Author
Posted

People, ive been made some offers of less than $5k for the gearbox, if i am to sell it the buyer needs to produce $5000 otherwise please dont make offers.

Thanks

Swiper the Fox Grand Master

Swiper the Fox

Posted
Posted
Yes, as soon as i get the engine back i will bolt up as much as i can and take a picture

can i ask who is building the engine...and who did the assembly on the gearbox?

Guest
This topic is now closed to further replies.
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • The Bogan
      NC MX5

      By The Bogan · Posted

      The final part arrived today to un-clampify and simplify the intake Who would have though a 1/2" hose stainless bulkhead fitting designed for below waterline bilge pumps would be what I needed Test fit on a 3" offcut I had laying around to see if it would work, and it worked a treat All going well the intake will be on its "final version" tomorrow 
    • Komdotkom
      R32 Gtst - Track Car

      By Komdotkom · Posted

      Good luck on the weekend mate
    • Duncan
      From Japan and back to Europe, my sh*tbox R34 GTT

      By Duncan · Posted

      Must have been an absolute nightmare to drive when the power steer was out, the rack ratio/wheel size/caster is all set up for power assistance
    • Duncan
      New

      By Duncan · Posted

      Welcome to SAU, what are you looking at buying?
    • GabsReDeal
      R32 GTS (RB20DE) Injectors Replacement

      By GabsReDeal · Posted

      I checked the injectors again (1 and 2, since they’re easiest to access) to make sure they weren’t clogged. Even though the entire fuel system had been cleaned, I wanted to be certain. Everything looked clean, so I reinstalled and connected everything. When I started the car to confirm everything was okay, it immediately revved up high, so I shut it off straight away. I checked to see if I’d missed a vacuum hose or something, but everything was connected. On the second attempt, the car ran without the high idle, but I noticed a distinct “compressed air” sound coming from the engine bay. Tracing the sound, I pushed injector #6 forward slightly and the noise stopped — it turned out it wasn’t seated properly, despite the fuel rail being bolted down. While holding it in place, the car idled steadily without stalling and ran for over 5 minutes. At this point, I pulled all six injectors out just in case I hadn’t seated them correctly or dirt had gotten onto the O-rings. Unfortunately, I discovered that I had damaged 3 out of 6 injectors (the OEM 270cc ones) during installation. So yes, this was my fault. Since only the pintle caps were damaged, I’ve ordered a Fuel Injector Service Kit from NZEFI to refurbish them. In the meantime, I reinstalled my new injectors – the car now idles fine for over 15 minutes without stalling. I have not attempted to drive it so far. It’s not perfect yet, as it hesitates when the throttle is pressed, but it’s a big improvement. Unplugging the IACV with the new injectors idles at around 800rpm, even with the IACV screw tightened fully. But this is probably due to tune.
×
×
  • Create New...