Jump to content
SAU Community

Recommended Posts

Hi everyone

Selling my car due to needing the money :P

Description:

1995 m-spec gts-t

black

93000 kms

REG till 26 May 2006

Always serviced regularly (still has log books etc from Japan)

All belts were replaced at 85000kms

body is in very very good condition

lowered 1.5 inches all round

18" chrome wheels and tyres (practically brand new)

3" mandrel bent cat-back exhaust with highflow cat and stainless cannon style muffler with epa noise print out at only 85 DB (well under legal limit)

new plugs, timing tune and boost increased slightly to 10 p.s.i (done by RX engineering and dyno print out)

Blitz pod filter

apexi turbo timer

Boost guage (custom installed wher ashtray usually is)

cd player

fusion 3" speekers all round

Interior is pretty much immaculate (slight wear on handbrake boot but hardly noticable)

Factory skyline floor mats

Car is in all round great condition, a definate head turner and very reliabe (it took me 3 months to find this car in this condition and ive owned 2 r33's before this and it is in much better condition than the last 2 and drives alot smoother and quicker even with minor mods)

Looking for $17500

(im in N.S.W near Newcastle)

Can take pics on request

Also have the standard airbox and filter, springs and exhaust to go with the car.

e this as a guide for new threads. Delete and/or copy the fields as needed - dont

Contact me on 0422642319 or email [email protected]

Link to comment
https://www.sau.com.au/forums/topic/102830-fs-1995-r33-gts-t/
Share on other sites

  • 2 weeks later...
Hi everyone

Selling my car due to needing the money  :D

Description:

1995 m-spec gts-t

black

93000 kms

REG till 26 May 2006

Always serviced regularly (still has log books etc from Japan)

All belts were replaced at 85000kms

body is in very very good condition

lowered 1.5 inches all round

18" chrome wheels and tyres (practically brand new)

3" mandrel bent cat-back exhaust with highflow cat and stainless cannon style muffler with epa noise print out at only 85 DB (well under legal limit)

new plugs, timing tune and boost increased slightly to 10 p.s.i (done by RX engineering and dyno print out)

Blitz pod filter

apexi turbo timer

Boost guage (custom installed wher ashtray usually is)

cd player

fusion 3" speekers all round

Interior is pretty much immaculate (slight wear on handbrake boot but hardly noticable)

Factory skyline floor mats 

Car is in all round great condition, a definate head turner and very reliabe (it took me 3 months to find this car in this condition and ive owned 2 r33's before this and it is in much better condition than the last 2 and drives alot smoother and quicker even with minor mods)

Looking for $17500

(im in N.S.W near Newcastle)

Can take pics on request

Also have the standard airbox and filter, springs and exhaust to go with the car.

e this as a guide for new threads. Delete and/or copy the fields as needed - dont

Contact me on 0422642319 or email [email protected]

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Hi all, Restoring r33 series 1 rb25det. All the heater hoses were on their way out, have replaced them and put it all back together. After testing I noticed a small leak from behind the head on the actual metal water line to the turbo when cars warm. I tried running a longer hose over it but it kept leaking...   I am about to take the (stock) manifold off again😔 to change the water line does any one have any lines they recommend? I was looking at Aeroflow Turbo Oil & Water Line Set but not sure what everyone else recommends. Car is completely stock but want to upgrade turbo eventually. it looks like ill have to disconnect a lot just to replace these lines so if there's anything else recommended to do please let me know. Thank you in advance!
    • From memory, on the R33 GTSt at least, while everyone says "It's not adjustable", I found when I changed clutches in mine, it just needed a small adjustment on the rod length. But be very wary here, as you could end up trying to push the pushrod in the master too far, or blowing out the slave.   Most likely though, if the master/slave isn't bypassing internally or leaking out, then the throw out is the wrong height compared to the fingers on the clutch, so when it moves to disengage the clutch, it isn't 100% disengaged. You can check part of this out too by jacking the car up, having the engine running, put your foot on the clutch and try to engage 1st gear. If it goes in pretty easy (Compared to the ground) and/or the wheels start turning a fair bit and it takes a bit too much brake pedal to bring them back to a stop, this is likely the issue.  I'm not sure if you can adjust the height of the forks etc in these though, it's been that long since I've touched any RB gearbox.
    • That's all good, I thought I was missing some interesting feature! Maybe @PranK can double check if that is something that is meant to be operating or not.
    • I hope that is not something that bad. From what i remember he said that only first gear is "hard" to get in and that he has couple of ideas what to try next but idk 😕  hope it is not gearbox out. I will let you know.
    • If it's not the hydraulics, it is probably gearbox back out. Usually as per @Duncan's post, or otherwise associated with not getting the throwout fork positioned correctly. All the way up to catastrophically bolting shit back together without it being aligned properly and wrecking the clutch/input shaft/flywheel/something else.
×
×
  • Create New...