Jump to content
SAU Community

Recommended Posts

  • 2 weeks later...

Id like to update my post after 1 years ownership (in which i drove for probaly 6 months the rest was in the workshop haha.

ar: 1990 r32 GTR (fresh import)

kms: 104,000km - new tomei cluster since my stock one failed lol

20 y/o. sydney

power: 250.7rwkw

Annual Costs:

rego = $280 (12 months)

greenslip = $550

insurance = $2800

Maintenance:

oil = $50 x once every two month

oil filter = $10 with every oil change

fuel filter = $10 every 2nd oil change

brakes = $280 (front & rear - Endless Super Street Y Sports)

brake rotors = $50 (bought them used)

interior/engine bay = $400 (making it look nice again lol)

tyres = $880 (Aug 06)

Mods:

turbotech boost controller = $40

hks boost controller = $200

dump pipes = $500

hi flow rb26 turbos = $1400

os giken twin plate clutch = $800

hi flow cat = $160

mines ecu = $100

power fc = $450

cam gears = $150

torque split + 2/4wd switch = $400

hks filters = $50

3bar greddy boost gauge = $180

kyb shocks & RSR springs = $250

Labour Repairs

- turbos blew = $1000 (inc some other work)

- stock clutch blew = $900 (expensive due to new purchased clutch not fitting)

- twin plate blew = $? ill find out next week lol

Stuff to do:

tune power fc + fuel pressure regulator

install and tune cam gears

hopefully near 300rwkw >_<

Edited by hanyou

1993 GMG R32 GTR

116,000kms

21yo, Perth

293hp with a few mods at purchase

Annuals:

$6,048 pay loan (5 years)

$2,200 insurance

$430? licence

Maintenance:

Engine Oil - $140 (thats twice)

Gearbox Oil - $? (once)

Fuel (I guess) - ~$3,600

Mods:

Tyres - $800 (after purchase)

PFC & EBC - $2552

Brakes: $560

Other: $1,000 give or take

TOTAL=$17,330 and then some

Thats since I bought it last year on May 31st and on top of the $24,000 + $990 stamp duty to buy it

I want to cry :thumbsup:

  • 1 year later...

Sorry for digging up an old thread but i am considering getting a 32gtr as a daily. I was hoping the owners of the car could give some feedback as to the suitability of a mildly modded 32gtr as a daily (200-250ishrwkw). What sort of fuel figures does the car return? As best i can see the ongoing costs of a reliable car are not really any worse than a similar car. I own a S6 RX7 and there are a stack of things i would recommend someone do when they buy one. Are there anythings that are "must dos" or things to watch out for?

Much appreciated!!

Brad

Edited by ADJUST

full tank can range from 70-90 depending on petrol. i get about 400-450km a tank. i use mine as a daily driver as well currently 250rwkw. but once i finish the tune and cam gears it will be close to 300rwkw. IMO mine has been very reliable as a daily, only times it has broken down was wen i've pushed it to the absolute limit. (ie: turbos & clutch).

for me it feels liek a average car driving to and from work (i drive about 450km a week) but wen u need that quick pull its ready anytime. i think just get a compression/leakdown test done prior purchase, then do a major service and get rid of those ceramic turbos.

....and get rid of those ceramic turbos.

I wouldn't do that straight up first, I still have ceramics, just make sure (if you buy a boost controller) your sensible with them and not increase boost over 14-15PSI. There are so many things you need to consider before modification. I just had another quick look at my post and it still makes me cringe :rofl: .

Stamp Duty is the silent killer, I was unaware but lucky my loan was for a square $25k.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • As discussed in the previous post, the bushes in the 110 needed replacing. I took this opportunity to replace the castor bushes, the front lower control arm, lower the car and get the alignment dialled in with new tyres. I took it down to Alignment Motorsports on the GC to get this work done and also get more out of the Shockworks as I felt like I wasn't getting the full use out of them.  To cut a very long story short, it ended up being the case the passenger side castor arm wouldn't accept the brand new bush as the sleeve had worn badly enough to the point you could push the new bush in by hand and completely through. Trying a pair of TRD bushes didn't fix the issue either (I had originally gone with Hardrace bushes). We needed to urgently source another castor arm, and thankfully this was sourced and the guys at the shop worked on my car until 7pm on a Saturday to get everything done. The car rides a lot nicer now with the suspension dialled in properly. Lowered the car a little as well to suit the lower profile front tyres, and just bring the car down generally. Eternally thankful for the guys down at the shop to get the car sorted, we both pulled big favours from our contacts to get it done on the Saturday.  Also plugged in the new Stedi foglights into the S15, and even from a quick test in the garage I'm keen to see how they look out on the road. I had some concerns about the length of the LED body and whether it'd fit in the foglight housing but it's fine.  I've got a small window coming up next month where I'll likely get a little paint work done on the 110 to remove the rear wing, add a boot wing and roof wing, get the side skirt fixed up and colour match the little panel on the tail lights so that I can install some badges that I've kept in storage. I'm also tempted to put in a new pair of headlights on the 110.  Until then, here's some more pictures from Easter this year. 
    • I would put a fuel pressure gauge between the filter and the fuel rail, see if it's maintaining good fuel pressure at idle going up to the point when it stalls. Do you see any strange behavior in commanded fuel leading up to the point when it stalls? You might have to start going through the service manual and doing a long list of sensor tests if it's not the fuel system for whatever reason.
    • Hi,  Just joined the forum so I could share my "fix" of this problem. Might be of use to someone. Had the same hunting at idle issue on my V36 with VQ35HR engine after swapping the engine because the original one got overheated.  While changing the engine I made the mistake of cleaning the throttle bodies and tried all the tricks i could find to do a throttle relearn with no luck. Gave in and took it to a shop and they couldn't sort it. Then took it to my local Nissan dealership and they couldn't get it to idle properly. They said I'd need to replace the throttle bodies and the ecu probably costing more than the car is worth. So I had the idea of replacing the carbon I cleaned out with a thin layer of super glue and it's back to normal idle now. Bit rough but saved the car from the wreckers 🤣
    • After my last update, I went ahead with cleaning and restoring the entire fuel system. This included removing the tank and cleaning it with the Beyond Balistics solution, power washing it multiple times, drying it thoroughly, rinsing with IPA, drying again with heat gun and compressed air. Also, cleaning out the lines, fuel rail, and replacing the fuel pump with an OEM-style one. During the cleaning process, I replaced several hoses - including the breather hose on the fuel tank, which turned out to be the cause of the earlier fuel leak. This is what the old fuel filter looked like: Fuel tank before cleaning: Dirty Fuel Tank.mp4   Fuel tank after cleaning (some staining remains): Clean Fuel Tank.mp4 Both the OEM 270cc and new DeatschWerks 550cc injectors were cleaned professionally by a shop. Before reassembling everything, I tested the fuel flow by running the pump output into a container at the fuel filter location - flow looked good. I then fitted the new fuel filter and reassembled the rest of the system. Fuel Flow Test.mp4 Test 1 - 550cc injectors Ran the new fuel pump with its supplied diagonal strainer (different from OEM’s flat strainer) and my 550cc injectors using the same resized-injector map I had successfully used before. At first, it idled roughly and stalled when I applied throttle. Checked the spark plugs and found that they were fouled with carbon (likely from the earlier overly rich running when the injectors were clogged). After cleaning the plugs, the car started fine. However, it would only idle for 30–60 seconds before stalling, and while driving it would feel like a “fuel cut” after a few seconds - though it wouldn’t fully stall. Test 2 – Strainer swap Suspecting the diagonal strainer might not be reaching the tank bottom, I swapped it for the original flat strainer and filled the tank with ~45L of fuel. The issue persisted exactly the same. Test 3 – OEM injectors To eliminate tuning variables, I reinstalled the OEM 270cc injectors and reverted to the original map. Cleaned the spark plugs again just in-case. The stalling and “fuel cut” still remained.   At this stage, I suspect an intermittent power or connection fault at the fuel pump hanger, caused during the cleaning process. This has led me to look into getting Frenchy’s fuel hanger and replacing the unit entirely. TL;DR: Cleaned and restored the fuel system (tank, lines, rail, pump). Tested 550cc injectors with the same resized-injector map as before, but the car stalls at idle and experiences what feels like “fuel cut” after a few seconds of driving. Swapped back to OEM injectors with original map to rule out tuning, but the issue persists. Now suspecting an intermittent power or connection fault at the fuel pump hanger, possibly cause by the cleaning process.  
×
×
  • Create New...