Jump to content
SAU Community

Fan Ridiculously Loud Whilst Revving /driving

turbohectics

By turbohectics,
in General Maintenance

 Share

Recommended Posts

turbohectics Proficient

turbohectics

Posted
Posted

Aye boyz ,I m guessing I need a new fan ,car is a 32 gtst .

Cruising around then I could hear the engine it was louder then normal,Its nothing to do with driveline as it makes the noise whilst parked .

It sounds like the fan and it s blowing pretty hard ,as you rev car sounds like a nissan patrol ,Pretty sure not the motor itself (hope not)

Any one heard of this happening, fan goes into hypo mode ?any more then 3000rpm sounds like gonna fly threw the bonnett.

feedback appreciated will post up how I fixed this problem

thanx guys

turbo

Oosh Veteran

Oosh

Posted
Posted

The fluid clutch in the fan is seized, meaning it will spin at whatever you rev the car to, usually they're setup to not go above a certain rpm.

Get on to this ASAP because they have been known to let go and go thru bonnets. No Joke.

http://www.skylinesaustralia.com/forums/in...showtopic=67746

stingray Collaborator

stingray

Posted
Posted

I just recently developed the exact same problem with my R32. Pitchd mentioned about getting a newclutch fan from FBI. Where is this place? Is it located in Victoria or are there any places that supply these in Victoria. What's the estimated price for a clutchfan.

skylinegtts Experienced

skylinegtts

Posted
Posted

i too have this problem. i got a new fan in today and when it started to get hot i began to have this problem again, and its been going on through the night. so i dont think its the fan coz it was just replaced. could it be because the cooling system isnt sufficient enough for our Australia weather? if it is what could be done to reduce it? any answers or ideas to the issue would be appreciated ASAP.

thanks heaps... Stephen

Bl4cK32 Grand Master

Bl4cK32

Posted
Posted (edited)

the clutch fan cuts out at 3000 Rpm.

I bought a new clutch assembly for mine. It was a craig davies replacement. On the box it had a whole heap of other model skylines it could be used for as well as the VL turbo RB30et. (rb30e has a different length and thickness shaft on the clutch)

From memory i bluffed the guy and got trade price @ $120

Edited by Bl4cK32
skylinegtts Experienced

skylinegtts

Posted
Posted

yeah ive found its onli on hot days. i dun think it could be the fan coz its a brand new one. is there any way to eliminate it if the fan isnt buggered? coz i seem to be losing power while it is happening aswell

Bl4cK32 Grand Master

Bl4cK32

Posted
Posted

The fan is operated by a small coil that uses temperature to engage itself.

On a hot day the fan would be on most of the time (below 3000rpm)

As a side note, the fan runs off the waterpump. Have you guys replaced the waterpump at anypoint? A shagged bearing in the waterpump will make the fan harder to spin, and can kill your car if it seizes...

skylinegtts Experienced

skylinegtts

Posted
Posted

turbohectics, have u fixed the problem yet? as i am curious to see how you fixed it because i got my fan replaced and the noise is still there. i am going to take it to the workshop on monday to hopefully get it finally fixed.

what other problems could cause this apart from the actual fan and waterpump? would like to know asap as i want to get it fixed once and for all.

Thanks

turbohectics Proficient

turbohectics

Posted
  • Author
Posted (edited)

Mine is fixed ,just got fan from wrecker ,

I can still hear it a lil bit but no where near as loud as before ,

I got better probs now i clened the cold start valve thing because car never starts whilst cold unless give it some throttle. and now my car idles at 1800rpm wha ,guessing car was fiddled with to compensate for a dirty cold start valve ,hope I can fix it my self gonna give it a go in the morning .Throttle stopper screw and tps I'm hoping will solve high idle

PS I hate skylines (my excel went for years no probs)lol

Edited by turbohectics

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • MBS206
      Cas issue

      By MBS206 · Posted

      Have you done the Ignition Sync Wizard in the AEM software?
    • MBS206
      R32 GTS (RB20DE) Injectors Replacement

      By MBS206 · Posted

      Find out what RPM it was idling at with the IACV unplugged. It's very weird that the rpm didn't change at all, and then it stalled. When it stalls is it nearly like a switch off, like you've turned the engine off? Or is it more stutters and sputters and coughs to death over a few seconds? Or does the RPM just slowly keep going down and down? Have you done a test of trying to start it with the AFM unplugged? Does it still die?     If you Follow Josh's advice on using Nistune to check the voltages (which is a perfect method!) if you see anything out of wack voltage wise, THEN get the multimeter out and read the voltage directly at the sensor. If the two vary, then you're now looking for a wiring issue vs a sensor issue. So be aware, what the ECU sees, may not be what the sensor is actually saying too...
    • MBS206
      RB25DE NEO with Haltech ECU

      By MBS206 · Posted

      You very likely need to get it on a dyno and tune it. My assumption is, you've got an RB25DET tune in it, which has a different manifold, different injectors, and different cams as a minimum. What O2 sensor are you running?   When you say it runs extremely rich from idle all the way to redline, is this just free revving it you see that?
    • Haggerty
      RB25DE NEO with Haltech ECU

      By Haggerty · Posted

      I seem to the be only person that is using a Haltech 2500 on an NA motor, I've installed a Bosch DBW throttle body to the OEM intake manifold and am having problems maintaining AFR even with the wideband o2.  It will run extremely rich at idle and up to redline, but under load it will go extremely lean in the 20s and i'm essentially having to rev it over 4k and feather the clutch to get it up to speed.  I've read a few other threads of about the butterfly, it seems removing the vacuum to it is supposed to have it remain open, i've noticed no difference under 4k with the vacuum line to it plugged.  I'm hoping someone here has had luck using the NA manifold with Haltech, and if they happen to have a tune for it.  
    • sonicii
      Could it really happen......

      By sonicii · Posted

      I don't know any details, but I really wouldn't be surprised if they do it as a LHD only version, at least initially.
×
×
  • Create New...