Jump to content
SAU Community

Recommended Posts

Seems to me that the air-temp sensore may have been on the way out earlier in the day. Not taking anything away from anyone in particular but does anyone think that a stock 25 can make 175kW on 9psi and stock ECU? Or that a stock RB20 can make 185kW on 10psi with a stock ECU?

Confusing but don't know that it would've affected results or not...

Adrian

Maybe the dyno was still in shock after the UAS Zed as i went on the dyno right after it. :D

I think no matter what going to a different dyno on the same day will give you different results.

I have had my previous cars on a few dyno's and have had a diff from 5-25kw.

Maybe we should just average them out!

  • Replies 717
  • Created
  • Last Reply

Top Posters In This Topic

hey it was a great day

i just wanna know if 2riszmo payed dubble for his 4 runs ??? didnt seem really fare if he didnt everyone gets 2 an he gets 4 ???

Nice. Speak to Ben who was running the dyno about that one. Either way my first run was enough. The nitrous runs were all for show :P

Adrian

Yeah well done to the organisers!

I had an awesome day as after my run, one of the guys said I should be getting more than 185kw, considering I've got an aftermarket turbo. And after 6 months of owning my car, I've finally realised that I have an Apexi AX53B70 P25 (380HP) Turbo in my car! I thought it was stock all this time, and never looked hard enough to really check (its completely hidden from view).

Even the last owner told me it was a stock turbo!! lol :D

Time to crank the boost!

FFS!!! What are you waiting for man.An invitation.. :P

The nos runs were the most entertaining i saw all day, a close second was the zed at the end of the day..

I strongly agree with some others that were there all day that there was definetly some fishy figures coming out, in particular the high ones (maybe not high enough) and the low ones (too high!)

Either way i dont care it was a awesome day to watch and chat with the other guys.

i was a happy with 193rwkw.. stock turbo r33 gtst. wish i could have stuck around to see the end results on who won that category.

Adrian (2rismo) ran away with it, with 190rwkw.

Very nice prize eh ?

El Bee

ps I would like Adrian to define "old pricks" from a previous post. I don't think that it is nice to be ageist in this forum, as I have not seen an age limit on membership.

Guest
This topic is now closed to further replies.



  • Similar Content

  • Latest Posts

    • This car has run before on this z32 ecu can get the part number for you, I have tried with no AFM it didn’t change anything, I compression tested today 140-150 across all 6 cylinders, also set fuel pressure to 43psi. The only weird thing was cylinder 1 plug was black and fouled other 5 cylinders were just wet with fuel. Spun cas by hand and confirmed injectors are clicking 
    • Since you came here to ask for help, have you thought about answering our questions, that might help us lead you to why it was skipping, or have you given up on getting advice?
    • A 1.5 way is a 2 way. It is just a 2 way with a less aggressive ramp on overrun.
    • The ABS and/or TCS being missing/broken will not cause the engine to misbehave. It just casues CEL to come on and annoy you. The CEL is useless if it is always on, so you have to do the things you have to do to get rid of it, so it can be useful. Being a Stag ECU, then yes, it will not expect TCS to be present. But it will expect ABS to be present and working. You will need to either make the ABS CU talk to the ECU (don't ask me what that will take on an NA R34), and make sure the hardware is working....or, you just need to blank it out in Nistune. Do not persist with the stock ECU. You will just have problems. Gte it Nistuned. Start from there. DO YOU HAVE A BOOST SENSOR? The ECU's boost sensor that it. It is connected to the loom at the rear of the coil cover. Usually rides on the firewall on an R34, but is usually bolted down to a bracket along with all the other crap at the back of the coil cover when a Neo is dropped into another car. If you do not have it, the ECU will shit the bed. So, do you have one?
    • So sadly the fuel pump etc was not it. The pump and filter is new and it is still cutting around 4000 rpm. A read something about ABS/TCS (engine is from stagea and ECU too so no TCS) and i dont know for 100% that my car has ABS. It has ABS "cube" in engine bay but i dont think it works(or at least from my braking experience). Can be something like that?  I will be driving the car next week to Nistune tuner to properly see what is wrong...  
×
×
  • Create New...