Jump to content
SAU Community

Recommended Posts

how much are they charging you to install and calibrate the IEBC, DFA and mixture display?

(...mixture display, is that like an air / fuel ration gauge?)

Well actually, I have been hearing some not so good things about the mixture display kit lately. So dont know whether I will go ahead with that just yet. Also, dont trust the local places to install the Jaycar gear around hear, I will wait untill I come to Sydney for Autosalon to do it. So couldnt give you a valid price at all.

And yes, Mixture kit displays whether your running rich/lean using 10 led lights...

Link to comment
https://www.sau.com.au/forums/topic/103074-finally/page/2/#findComment-1919652
Share on other sites

Keep us posted.

HHMMMM, crazy me, thinking of selling some shares (dogs) that will break even after tax and costs, to get a hiflow done on the turbo I bought (was meant to be a R34 neo - thanks a f'n lot Hooman you liar).

So, I would love to know your thoughts on the feel of the Stagea once the GCG hiflow is installed.

Link to comment
https://www.sau.com.au/forums/topic/103074-finally/page/2/#findComment-1935702
Share on other sites

I'm expecting once tuned to reach the 180awkw mark as you said. Then add the FPR, GTR Fuel Pump and a Split dump pipe.... Should reach the magic 200awkw. Which is where it shall stay :O

and your how old again???

Link to comment
https://www.sau.com.au/forums/topic/103074-finally/page/2/#findComment-1935760
Share on other sites

yeah, mines sitting on the shelf at home, a really good condition one with like no rust or anything, real low kms unit, no shaft play at all. paid $600 presumming it was as advertised an a Neo turbo. biatch, I got rolled over and xxx.

not sure if I go GCG or local ATS (GT30 internals)..... thinking local as my tuner swears by the ATS work quality.

Link to comment
https://www.sau.com.au/forums/topic/103074-finally/page/2/#findComment-1935761
Share on other sites

and your how old again???

"and your how old again??? "

old enough to know what he wants lol

hahaha exactly :O

But yes I will keep you all posted on how it goes, unfortunatly it wont be here untill tommorow though... Bit of a dely.

Got some dyno tuning booked (Cheers Sk) which will be happening on the 17th of March, just before I reprazent Stagea's at Autosalon :D

Link to comment
https://www.sau.com.au/forums/topic/103074-finally/page/2/#findComment-1936252
Share on other sites

"and your how old again??? "

old enough to know what he wants lol

i knew what l wanted at his age too ... thankfully l didn't get it, as l know l wouldn't either:

a) be here

or

B) be walking a hell of a lot

But hey, if he can resist the urge esp with all the power at his age then go for it.

Edited by [ STAGEN ]
Link to comment
https://www.sau.com.au/forums/topic/103074-finally/page/2/#findComment-1936603
Share on other sites

Hope its all good......................

Yep its all good :P

Got it tuned to run 8 psi at the moment (just through a bleed valve) untill I have enough spare time to install the IEBC and DFA. Vast improvement though, power delivery is alot more stable and precise (cant wait to wind it up a bit though).

As for power improvement, the car is slightly quicker 0-100 with 8psi on the highflow compared to 21psi on the standard turbo (dodgey boost upgrade led to its death). The main difference we have found is the midrange, much much stronger than before. And 100km/hr to 140km/hr is soo much faster now ;)

Lovin it

Link to comment
https://www.sau.com.au/forums/topic/103074-finally/page/2/#findComment-1941488
Share on other sites

  • 2 weeks later...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • I read this and thought "ah! I will do this scissor jack on the tow point thing!" I just use my floor/low profile/costco jack and lift the car up by the tow hook itself, then slide jack stands under. Never thought about using scissor into floor jack combo :p
    • Well, my new WMI system took much longer to finalize. I actually missed my dyno appointment last Friday and lost my 150$ deposit. I'll be going back in the next week or two.  To sum it up. I only kept the AEM tank from my old setup. I replaced the AEM pump with a higher flow/pressure ProMeth 30GPH pump. I also swapped over to a 6AN low pressure feed line to the pump from the tank. There's also a pressure switch you cannot see on the pump high pressure line.    This is feeding 6x 200CC direct port nozzles and 1x 500CC Pre Throttle body nozzle. All fittings are Swagelok, because well why not. I also have a 300PSI pressure sensor up front.    I now have my Haltech ECU controlling everything. I start my pump with a basic relay at 5PSI and deadhead it. I then PWM a 3000CC methanol Injector to control flow starting around 10psi. The pressure switch in the trunk, along with my tank level are safeties before I ever get to 10PSI, and then I use my pressure sensor upfront as a secondary safety to cut the WMI and corrections in case the injector blocks or a line ruptures.  Wish me luck on the dyno!    
    • So, I'm back with bad news. There's no jack long enough on this planet that will reach the front subframe. If by some chance there is, it would weigh 200lb's.  I purchased a long reach jack... The damn thing weighted 120lb's and was massive. Didn't even come close, was still short at least a foot. It was a pain, but I brought it back. Next I decided HA! No problem, I'll get an Extra long reach jack. Well, I couldn't lift the box... It must have weighed 160LB's and luckily there was an open box in store. I took measurement and was still nowhere close.  Sadly I've lost hope and have accepted defeat. 
    • Thanks for that tip, niZmO_Man. I think the battery is OK. It's quite a new one, but I'll check. Last time I needed a new battery, everything electronic was fine, except that there wasn't enough current to turn over the starter. I decided to order one of the partial AV system translation CDs from Car Audio Workshop in NZ. That might have some effect, or help me diagnose the date problem. 🤞
    • I suppose it was relatively stock too, the JZ motor handle most mods thrown at them without even breaking a sweat 
×
×
  • Create New...