Jump to content
SAU Community

Recommended Posts

sometimes it feels like ive got the hand brake on when i take off n also noticable when im drivin as its jus not as reponsive yes ive checked n i never use it anywayz :D

ive got no idea what it is, been doin it since i bought it .. when i first turned up the boost it seemed to sort it self out and felt a lot more responsive n light but now its come back again, not sure if its jus the weight of the car and the awd (never owned a heavy or awd car) or theres a prob.

has anyone noticed this, is it normal? or have i got a problem?

Link to comment
https://www.sau.com.au/forums/topic/103530-annoying-problem/
Share on other sites

Go and get it checked by a reliable workshop...let them have a drive, they should know what the problem is. Do it before you get caught out like I did... Or you will end up with a BIG hole in your bank account!

Go and get it checked by a reliable workshop...let them have a drive, they should know what the problem is. Do it before you get caught out like I did... Or you will end up with a BIG hole in your bank account!

yeah ive got the day off on Monday, i'll take it in n see what they say then post up what they find in case this can help anyone else later

Maybe even a blocked air filter or intercooler, ie full of crud. Might not be getting enough air? Take off the front bar, take off 'cooler & flush with kero/metho, check all pipes & clean air element.

Give it a run in lower boost & see how it feels (?).... dunno really.

last few days also when i jus start to drive it, it jus drops power then back on an off again in a second must look like im bunny hoppin it hahaha pretty funny in an auto .. dunno if this is related to the other part of the prob but tomorrow i'll drop the cooler and clean it out n also clean the AFM as suggested an see if these solve the prob.

Cheers guys n keep the suggestions rolling there all beneficial :P

last few days also when i jus start to drive it, it jus drops power then back on an off again in a second must look like im bunny hoppin it hahaha pretty funny in an auto .. dunno if this is related to the other part of the prob but tomorrow i'll drop the cooler and clean it out n also clean the AFM as suggested an see if these solve the prob.

Cheers guys n keep the suggestions rolling there all beneficial  :D

Kinda sounds like what I had...

Power would come in then out then in then out... Cept mine did it in all gears :(

I get an odd problems. Ok, well i get two problems.

I replaced my plugs ~5000km ago, i get mis fires sometimes at ~5000RPM. They are BCPRS7-ES i think, at 0.8mm, but they will be replaced soon.

Also, in like 2nd gear, i get smooth acceleration and then suddenly i get a cut out kinda like i am changing gears but i am not, then power is back smooth again.

Also, does anyone get diff clunk here?? I get clunking from my diff when i do a uturn, or when i am pulling up to park on the side of a road, or when doing a tight turn.... whats up with that? It isnt LSD i know for sure.

hmmm... well maybe a bit premature but just bought a new turbo :) i know u guys are gonna gimme sh!t for it, but bought a T04e of ebay cheap cheap ($372.50) brand new internal wastegate

so now jus gotta try n figure out how to replace it ..

Just read a post on removing the turbo from an R33 anyone else here done it before?

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • I can see between the water jacket and cyl 3 there wasn't a hard line of combustion gas. It certainly appears that the issue is coming from there. Yes, checked the tension. All at 100ft lbs where I set them 5 years ago. These blocks can crack but generally when they have been over bored. Mine is only 0.5mm oversize at 89.5mm. They break between cylinders around the 91mm mark. No sign of that with mine. My gut feeling is the head gasket lifted a while back when the studs stretched and i bandaided it by retorquing the studs. It's finally let go.
    • My Nismo 1.5 churps a bit on reverse turns when cold, but besides that feels like a stock diff.
    • Yes, but, I paid cash and I'm pretty sure the receipt was in the bin 10 minutes after I got home Note to self, keep all receipts
    • Bunnings would have just handed you your money back on that one!
    • So, version 4 intake is on its way I was looking at these a while ago but at around $200 or more it was a little pricey for something that might not work, but, I had it in my watch list, but, I got a message saying it was on special, and I had a code thingie to use, it eventually came in at $120 delivered, so BAM, BUY NOW.....LOL I'll need to have a look when it arrives but I feel it will "look" better than what I currently have, as it comes with a PCV fitting, so I will be able to get rid of the alloy pipe that goes to the throttle body with the PCV fitting  Well, that's what the voices in my head are telling me  Oh, and this happened today Yeap, it was a Trojan, and it was cheap, so I headed back to the hardware store and actually spent a little bit more on a heavy duty,  one that was actually recommended by a plumber mate, a Cyclone one with a fibreglass handle that is actually rated for clay The broken shovel will eventually be "modified" into a short handle shovel
×
×
  • Create New...