Jump to content
SAU Community

Recommended Posts

I reckon Springwood would be OK,

riverside is nice if you wanna take a load up the ass.

any more ideas?

just a note on riverside for you.... a few wks back, we traveled from yatala bp to riverside, ended up sittin around for 20mins, paddy wagon drove through and they just asked what we are doin and if we would move along. we asked for 10mins and they were happy to let us stay for 10mins.

there were only a few of us but it wasnt as packed as what it would of been years ago.

Yup interested in meeting some of you guys.

If its a Northside meet as stated that would be great as I am up here on the Sunny Coast :wub: Springwood is not North :unsure: whereis.com told me so :D

Keep me informed and I'll bring the old girl out for the night

Cheers

Scott

I reckon Springwood would be OK,

riverside is nice if you wanna take a load up the ass.

any more ideas?

Yeah. I havent been out in ages :P Wasnt sure what it is like now. Springers or round sunnybanks is good for me. Both arent too far off the motorway for northsiders.

And riverside is at the start of the motorway so maybe a meet at riverside, then to sunnybank and then on to springwood as a final destination! then because it would seem northsiders will be attending if everyone leaves together then there is a second phase to the cruise because the majority will be heading back up the motorway anyways! Also if you make the meet slightly earlier than the norm than we might avoid the undue attention that friggen twits from BC and the like seem to attract.

:PBJ:

Only sugesttons as mud is rooting this sheep, i'm just holding the head :P

Hrmm... I'm keen. Will have to check with Andy, he's not too keen on getting defected in the first week of new car ownage, but we'll see. I do like the idea of having something more northside. We're from the southside, but we see everything being planned near us, and feel for the northsiders who constantly have to travel. Hope it doesn't get rained out again Mud, if i'm feeling nice, might even bring a cake :) LOL

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • I wanted to try and preserve the front bumper as long as possible, they're not cheap and are made to order in Japan. Taking inspiration from my previous K11 Micra build where I made an undertray for the Impul bumper, I did the same for this BN Sports bumper but a little slimmed down.  This time round I only made a 'skid plate' (if that's the correct wording/term) for just the bumper surface area, the Micra version covered the gap like an undertray. Starting off with a sheet of mild steel approx. 0.9mm thick 4ft x 2ft in size. I traced around the bumper, cut it out and cleaned the edges. Luckily I was able to get two halves from one piece of metal In the video I installed it as is, but I've since then I've removed it to spray and add a rubber edging trim. The rubber trim is suitable for 1-2mm and it's a really nice tight fit. The bolts had to be loosened due to the plates being too tight against the bumper, the trim wouldn't push on I used some stainless M6 flat headed bolts for a flusher finish (rather than hex heads poking down), I believe this style fastener is used for furniture too incase you struggle to source some. The corner's are a little wider, but this may be an advantage incase I get close to bumping it  The front grill got some attention, finally getting round to repairing it. Upon removal one fixing pulled itself out of the plastic frame, one side is M8 that fixes inside of the frame, where as the other side is M5. Not knowing I could get replacements, I cut down an M8 bolt, threaded it inside the frame along with a decent amount of JB Weld.  The mesh was replaced to match the bumper. One hole on the bonnet/hood had to be drilled out to 8mm to accommodate the new stud, once the glue had set it could be refitted. I think the reason the grill was double meshed was to hide the horn/bonnet latch (which makes sense) but I much prefer it matching the bumper Bumper refitted and it's looking much better IMO The Youtube video can be seen here: https://www.youtube.com/watch?v=bVZP35io9MA
    • The video for the servicing and fuel filter change can be seen here: https://www.youtube.com/watch?v=uLJ65pmQt44 One of the main jobs I wanted to do before the car officially went on the road, was to remove the awful looking blue silicone hoses. There's nothing wrong with having coloured silicone hoses, but I realise as I'm getting older I prefer monotone engine bays with a splash of colour on the engine cover(s). I cover this in a lot more detail in the Youtube video, so unfortunately there's limited photos of the process. The intercooler, upper radiator, boost vacuum and upper breather hoses were all changed to black silicone with mikalor clamps. The only blue left is a blanking cap at the back of the inlet manifold and the GReddy pulleys (which will be replaced for stock when the cambelt gets replaced) While the intercooler pipes were off I gave them a quick clean/polish too A before photo I do have a replacement air filter on its way. Fuse box covers were painted blue, they're now satin black Another job on the list while the bumper was off, is to add some mesh https://live.staticflickr.com/65535/54737966256_99b28bfa30_c.jpg[/img] I was hoping to use some thin wire to secure it, but it seems I've misplaced it and the wire I had was too thick to twist easily. I ended up using cable ties for the time being https://live.staticflickr.com/65535/54737131882_c2b7989dcc_c.jpg[/img] Was pleasant to see this https://live.staticflickr.com/65535/54737131627_8b2aab13b3_c.jpg[/img] The last thing to do was to fix the front grill and re-mesh that to match but I ran out of time The Youtube video can be seen here: https://www.youtube.com/watch?v=R4FsF6tgizE&t=23s
    • Hi all,I already introduced myself in the Victoria section, but only saw this section now lol XD New to forums and new to skylines. Hoping to buy my new skyline within October
×
×
  • Create New...