Jump to content
SAU Community

Recommended Posts

morning all.

i spent some time on sunday making a cold air induction for the cressida, utilising a chaser head light so that i could have a cold air scoop but also have lighting on that side of the car. at the last SC meet i had major problems with intake temps of 72 degree cel, as my air filter sits in the only location i have room for it in my grandpa designed engine bay, so i am looking to get some cooler air into it.

upon reading my sport compact rule book it says must run complete headlight. i asked around at the last round in sydney, and i got mixed interpretations of the rule.

one frame of mind was as long as there was lighting on that side of the car it was ok.

the other was, if you dont have the glass and bulbs in all areas of the headlight that it came from the factory its not a complete headlight.

i know i spoke to paul about this and another guy in our class who had a bulb and also an air duct in the headlight, and i think if there is lighting it should be ok.

has anyone got any ideas on this rule or have they spoken to ohalleron about it?

any thoughts would be appreciated.

Shane.

Link to comment
https://www.sau.com.au/forums/topic/103819-srwd-rules/
Share on other sites

well cow girls.

after a lack of banter on the topic i emailed jason ohallaren.

the complete headlight is defined as complete

ie full glass, bulb in full working order as it is from the factory. so for all point scoring rounds cars in S/RWD must have a complete functioning head light.

screws up my plans for my cold air, but i will find a way.

Shane

Link to comment
https://www.sau.com.au/forums/topic/103819-srwd-rules/#findComment-1918533
Share on other sites

well cow girls.

after a lack of banter on the topic i emailed jason ohallaren.

the complete headlight is defined as complete

ie full glass, bulb in full working order as it is from the factory. so for all point scoring rounds cars in S/RWD must have a complete functioning head light.

screws up my plans for my cold air, but i will find a way.

Shane

Jason is right

Rule no. SR 7.6

Complete headlight and taillight assemblies mandatory; must be operative.

Edited by DiRTgarage
Link to comment
https://www.sau.com.au/forums/topic/103819-srwd-rules/#findComment-1920725
Share on other sites

Do S/RWD rules allow you to disable factory fitted power steer?

Rule SR 3.2 Must retain full, original OEM steering gear.

I have only tried disabling power steer once at the track...it was no real benefit other than giving my forearms a good workout.

Edited by DiRTgarage
Link to comment
https://www.sau.com.au/forums/topic/103819-srwd-rules/#findComment-1920765
Share on other sites

Who knows...but my p/steer is staying

Bit confused here, why are you worried about S/RWD rules allowing you to disable factory fitted power steer then?

you planning on stripping the car when you race, I wouldn't worry about it my 10.5 was done with a fullweight car + some due to surge tank, big single turbo etc

Link to comment
https://www.sau.com.au/forums/topic/103819-srwd-rules/#findComment-1921811
Share on other sites

Bit confused here, why are you worried about S/RWD rules allowing you to disable factory fitted power steer then?

you planning on stripping the car when you race, I wouldn't worry about it my 10.5 was done with a fullweight car + some due to surge tank, big single turbo etc

I'm not planning on it...if I go to the drags again, I will run in the same trim as I have always done.

* Full weight, including all trim, spare wheel, tools and jack

* Street Tyres

* Full exhaust (a quiet one at that)

* Stock Airbox

* At least 3/4 tank fuel

Link to comment
https://www.sau.com.au/forums/topic/103819-srwd-rules/#findComment-1921843
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Yes the gear for the R33/34 is different, it is red and has a different number of teeth. My part didn't come with that gear though, so I don't know how many teeth are on the red one. You'd have to reuse the 260RS/R33 gear, as long as it's not destroyed.   Haha, as unfortunate as that might be it was working fine for about the first 1500km I've had the car for now.
    • Update all   thanks to the workshop manual, it lead me back to checking fuses as mentioned central locking and door open lights worked when acc was switched on. diagram attached shows two points of power 1. ACC and 2.  Batt with the later being fused (#28) I did check the fuses using a multimeter but I must have stuffed that up also. Went back and checked the batt fuse in interior fuse box and you wouldn’t believe it… a blown fuse. replaced fuse and everything is now working as it should including the climate control   thank you all with your positive insight and knowledge.    
    • Where is the warning "That this thread is super old"   I just went into a 5 year old thread, went to do a reply, and couldn't see anywhere obvious a warning of it being super old
    • Duncan is correct. Pitwork (and Toyota's own cheap brand "Drive Joy") were primarily created as brands to sell other manufacturers car parts. It would be weird if Nissan sold parts for Toyota vehicles with a Nissan logo on it, so they created Pitwork to sell parts for other brans Toyota, Honda etc. They are not the same as Nissan genuine parts, although they *do* meet Nissan's standards for replacement parts. They aren't supposed to be a substitute for genuine parts, but a cheaper alternative that is better than Ebay fake parts from you-know-where.
    • Thanks GTSBoy, much easier to work with it now it's free!  
×
×
  • Create New...