Jump to content
SAU Community

S/rwd Rules

1JZ.747

By 1JZ.747,
in Motorsport Discussion & Builds

 Share

Recommended Posts

1JZ.747 Community Regular

1JZ.747

Posted
Posted

morning all.

i spent some time on sunday making a cold air induction for the cressida, utilising a chaser head light so that i could have a cold air scoop but also have lighting on that side of the car. at the last SC meet i had major problems with intake temps of 72 degree cel, as my air filter sits in the only location i have room for it in my grandpa designed engine bay, so i am looking to get some cooler air into it.

upon reading my sport compact rule book it says must run complete headlight. i asked around at the last round in sydney, and i got mixed interpretations of the rule.

one frame of mind was as long as there was lighting on that side of the car it was ok.

the other was, if you dont have the glass and bulbs in all areas of the headlight that it came from the factory its not a complete headlight.

i know i spoke to paul about this and another guy in our class who had a bulb and also an air duct in the headlight, and i think if there is lighting it should be ok.

has anyone got any ideas on this rule or have they spoken to ohalleron about it?

any thoughts would be appreciated.

Shane.

Link to comment
https://www.sau.com.au/forums/topic/103819-srwd-rules/
Share on other sites
1JZ.747 Community Regular

1JZ.747

Posted
  • Author
Posted

well cow girls.

after a lack of banter on the topic i emailed jason ohallaren.

the complete headlight is defined as complete

ie full glass, bulb in full working order as it is from the factory. so for all point scoring rounds cars in S/RWD must have a complete functioning head light.

screws up my plans for my cold air, but i will find a way.

Shane

Link to comment
https://www.sau.com.au/forums/topic/103819-srwd-rules/#findComment-1918533
Share on other sites
Swiper the Fox Grand Master

Swiper the Fox

Posted
Posted (edited)
well cow girls.

after a lack of banter on the topic i emailed jason ohallaren.

the complete headlight is defined as complete

ie full glass, bulb in full working order as it is from the factory. so for all point scoring rounds cars in S/RWD must have a complete functioning head light.

screws up my plans for my cold air, but i will find a way.

Shane

Jason is right

Rule no. SR 7.6

Complete headlight and taillight assemblies mandatory; must be operative.

Edited by DiRTgarage
Link to comment
https://www.sau.com.au/forums/topic/103819-srwd-rules/#findComment-1920725
Share on other sites
Swiper the Fox Grand Master

Swiper the Fox

Posted
Posted (edited)
Do S/RWD rules allow you to disable factory fitted power steer?

Rule SR 3.2 Must retain full, original OEM steering gear.

I have only tried disabling power steer once at the track...it was no real benefit other than giving my forearms a good workout.

Edited by DiRTgarage
Link to comment
https://www.sau.com.au/forums/topic/103819-srwd-rules/#findComment-1920765
Share on other sites
BU5TER Grand Master

BU5TER

Posted
Posted
Who knows...but my p/steer is staying

Bit confused here, why are you worried about S/RWD rules allowing you to disable factory fitted power steer then?

you planning on stripping the car when you race, I wouldn't worry about it my 10.5 was done with a fullweight car + some due to surge tank, big single turbo etc

Link to comment
https://www.sau.com.au/forums/topic/103819-srwd-rules/#findComment-1921811
Share on other sites
Mik Experienced

Mik

Posted
Posted
Bit confused here, why are you worried about S/RWD rules allowing you to disable factory fitted power steer then?

you planning on stripping the car when you race, I wouldn't worry about it my 10.5 was done with a fullweight car + some due to surge tank, big single turbo etc

I'm not planning on it...if I go to the drags again, I will run in the same trim as I have always done.

* Full weight, including all trim, spare wheel, tools and jack

* Street Tyres

* Full exhaust (a quiet one at that)

* Stock Airbox

* At least 3/4 tank fuel

Link to comment
https://www.sau.com.au/forums/topic/103819-srwd-rules/#findComment-1921843
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • MBS206
      Duncan's V37.......race car?

      By MBS206 · Posted

      I'm not 100% how the BMW racers do it, but I know from other brands like Merc, moving, and changing the coolers is one of the things. Like getting a transcooler out from infront of the radiator to out near a wheel arch. So some of the stuff you've got crammed in the middle front, spread it out and open up where you can in the bar to get more air in to the sides.
    • Duncan
      Duncan's V37.......race car?

      By Duncan · Posted

      Small update for the day... Turns out the intercooler and engine coolant hose kits are anything but complete....I probably should have counted better but it only really covers about half the coolant hoses in the car, it really just covers the visible stuff and pretends everything else doesn't exist (turbo water feed and returns and also heat exchanger lines through the 2 pumps and cooler) .In any case, I'm happier to have half reliable hoses than none, but a bit of a disappointment. Anyway...finger click (and 5 hours).....hoses in place, lots of spring clamps replaced with screw clamps, and engine coolant is on the pressure tester for the night.   Incidentally, upsized header tank is an Inifiniti factory option....not sure I'll ever do prod car racing in this but at least it is legal.
    • GTSBoy
      GTX2867R GEN 2 NO OUTPUT FOR BOOST SOLENOID

      By GTSBoy · Posted

      Just weld it onto the hot pipe. If you want it right after the turbo, put it right after the turbo. Or rip the comp cover off and drill and tap a hole into it.
    • Duncan
      Duncan's V37.......race car?

      By Duncan · Posted

      hahaha glad I can rely on you two to go on a spiral at the drop of a problem! Some quick answers....the ducting is excellent top bottom and sides....everything that gets in goes through the coolers (noting the oil cooler redirects it out again, fair call if it is cooling 120o+) and the heat exchanger for the intercooler also has some scoops to pick up more than it's fair share too. I can't see going down the water spray track....no bueno for formal racing and a big risk for long rally days if you run out (plus I'm not clear if it is allowed there either yet).   Frankly, it must be possible to reliably put 400kw through a standard front end, the BMWs do it so I just need to work it out....I'm starting with reducing blockages in the way and adding some coolant capacity with a bigger header tank, flushing rad and making sure it was filled/bled properly (I didn't do the last coolant change); also taken measurements incase next step is a bigger/higher capacity custom radiator
    • Duncan
      R32 GTR Limp Mode?

      By Duncan · Posted

      wow, a completely stock GTR! I've got to admit, I have no idea from what you are describing....do you have  any idea where the "thump" comes from, and are you certain it is the HICAS light not something else like the cat overheat light?
×
×
  • Create New...