Jump to content
SAU Community

Recommended Posts

morning all.

i spent some time on sunday making a cold air induction for the cressida, utilising a chaser head light so that i could have a cold air scoop but also have lighting on that side of the car. at the last SC meet i had major problems with intake temps of 72 degree cel, as my air filter sits in the only location i have room for it in my grandpa designed engine bay, so i am looking to get some cooler air into it.

upon reading my sport compact rule book it says must run complete headlight. i asked around at the last round in sydney, and i got mixed interpretations of the rule.

one frame of mind was as long as there was lighting on that side of the car it was ok.

the other was, if you dont have the glass and bulbs in all areas of the headlight that it came from the factory its not a complete headlight.

i know i spoke to paul about this and another guy in our class who had a bulb and also an air duct in the headlight, and i think if there is lighting it should be ok.

has anyone got any ideas on this rule or have they spoken to ohalleron about it?

any thoughts would be appreciated.

Shane.

Link to comment
https://www.sau.com.au/forums/topic/103819-srwd-rules/
Share on other sites

well cow girls.

after a lack of banter on the topic i emailed jason ohallaren.

the complete headlight is defined as complete

ie full glass, bulb in full working order as it is from the factory. so for all point scoring rounds cars in S/RWD must have a complete functioning head light.

screws up my plans for my cold air, but i will find a way.

Shane

Link to comment
https://www.sau.com.au/forums/topic/103819-srwd-rules/#findComment-1918533
Share on other sites

well cow girls.

after a lack of banter on the topic i emailed jason ohallaren.

the complete headlight is defined as complete

ie full glass, bulb in full working order as it is from the factory. so for all point scoring rounds cars in S/RWD must have a complete functioning head light.

screws up my plans for my cold air, but i will find a way.

Shane

Jason is right

Rule no. SR 7.6

Complete headlight and taillight assemblies mandatory; must be operative.

Edited by DiRTgarage
Link to comment
https://www.sau.com.au/forums/topic/103819-srwd-rules/#findComment-1920725
Share on other sites

Do S/RWD rules allow you to disable factory fitted power steer?

Rule SR 3.2 Must retain full, original OEM steering gear.

I have only tried disabling power steer once at the track...it was no real benefit other than giving my forearms a good workout.

Edited by DiRTgarage
Link to comment
https://www.sau.com.au/forums/topic/103819-srwd-rules/#findComment-1920765
Share on other sites

Who knows...but my p/steer is staying

Bit confused here, why are you worried about S/RWD rules allowing you to disable factory fitted power steer then?

you planning on stripping the car when you race, I wouldn't worry about it my 10.5 was done with a fullweight car + some due to surge tank, big single turbo etc

Link to comment
https://www.sau.com.au/forums/topic/103819-srwd-rules/#findComment-1921811
Share on other sites

Bit confused here, why are you worried about S/RWD rules allowing you to disable factory fitted power steer then?

you planning on stripping the car when you race, I wouldn't worry about it my 10.5 was done with a fullweight car + some due to surge tank, big single turbo etc

I'm not planning on it...if I go to the drags again, I will run in the same trim as I have always done.

* Full weight, including all trim, spare wheel, tools and jack

* Street Tyres

* Full exhaust (a quiet one at that)

* Stock Airbox

* At least 3/4 tank fuel

Link to comment
https://www.sau.com.au/forums/topic/103819-srwd-rules/#findComment-1921843
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Drain it. I got official Matic D but you can get whatever is listed as Matic D compatible.
    • Thanks guys,  Yeah I should at least have them dynoed, at least then I know what I've got as a starting point.  The springs on these are hard as rocks. I vaguely remember Russman saying he was going to sell the shocks to me with the rocks fitted, as he was keeping the softer springs for his new setup.  I didn't click at the time but of course that was to let me know the shock/spring wouldn't be matched.  I also remember pricing up new springs around 2014-15, but, house, money etc. it never happened. So that was another reason to have them rebuilt. I have rebuilt the forks on many motorcycles so I think I could handle the seals on these easily enough, but getting the valving right would be a rabbit hole I cbf exploring.  Duncan, interesting to hear RP was tuning these back then. I might give them a call.  In the mean time I have been busy fitting sway bars. The Whiteline rear sway bar I purchased 15 years ago finally got fitted, along with the Whiteline front bar that showed up last week. Just waiting on new links for the front sway bar to finish that off.  And my spare set of advan AVS VS5's should be back from the powder coaters in a Pearl White finish sometime this week, with a set of Hankook RS4's lined up for fitting.  And then I just have all the suspension bushes to do. A comprehensive kit is on the way... Lots to do before the Ararat hill climb. Cheers guys 🍻   
    • Nice car! I’m glad folks in the US have gotten past the FnF and are buying real cool cars like the 260RS I was with a bunch of mates in Portland about a year ago and spotted a green Stagea (just a regular 2.5T AWD) parked about 2 blocks away and they were like “a what?” So I made a bet with them for a round of beers and said “ok one of you run down there and tell me if the steering wheel is on the correct side” 5 mins later the American comes trudging back up the hill and goes “he’s right guys. Ok what beer do you want?”
    • Should replace OR drop the tank, give it's good clean. Might be worth replacing that entire fuel level/pump/cradle thing with this: https://frenchysperformancegarage.com/products/fpg-s13-180sx-r32gtst-single-pump-hanger-kit-billet-hat-6-v3-fpg-089?gQT=2  
    • Thank you so much for the help
×
×
  • Create New...