Jump to content
SAU Community

Recommended Posts

I was driving down Panalatinga RD (down south) for those who don't know its a two lane road that is straight and long. the limit down there is 80km I was following a hilux doing 70. I pulled over at the red light and came along side him when I drove off he pulled in behind me and followed me rather close, i couldn't see his number plate he was so close. I put my foot down and went slightly over the limit to try and make some space he followed me up to 90 and when I changed lanes, also when I pulled into a side street. I finally pulled into some private property (i don't know whos) and he finally went off.

I don't know what his problem was, I went around him for going under the limit just to have him drive dangerously close to me. Never had anything like that happen to me in my old car.

Link to comment
https://www.sau.com.au/forums/topic/103871-tailgater/
Share on other sites

could it be possible that you may've irritated him when you were driving behind him to begin with. some of my friends can be irritated by other motorists because of things like this but half of the time, they were the ones who mildly tailgated them to begin with. you'd be surprised what other peoples definitions of tailgating can be. sometimes it only counts as tailgating when someone else is doing it to them.

Link to comment
https://www.sau.com.au/forums/topic/103871-tailgater/#findComment-1910127
Share on other sites

me and HR-32 live just off panalatinga rd :D in woodcroft area!

should of just let your foot off the accelarator and rolled slowing down.. if he persisted back into second could of smoke gone!

some people are idiots. i hate it when im coming home from work down that road and people do like 60 -70 holding up traffic.

Link to comment
https://www.sau.com.au/forums/topic/103871-tailgater/#findComment-1912960
Share on other sites

if ppl tailgate me..I slam on my brakes~~

if police ask ..I'll go...I saw a cat run across the road....then other driver got to pay for my damages...lallalala

doen that twice but no accidents so far~~...only the guy at back horn me like crasy...lol

Link to comment
https://www.sau.com.au/forums/topic/103871-tailgater/#findComment-1913323
Share on other sites

i will slow down when people tailgating me, until the get mad and TRY to overtake me, i will overtake them when they TRY

the beauty of skyline is u can do this within the speed limit, and tell them who is the king of the road ;)

i remember doing that back when i was driving my 120y, had a van driver go about 1 & 1/2 carlengths from me. then i slowed down to 45, he was in a rush, there was traffic, and so i gunned it just enough for him not to get in and overtake me. then he started following me at less than a meter :P . man it was dodgy. tapped the brakes a bit but cbf prangning it. van drivers are reputable for that kind of shit.
Link to comment
https://www.sau.com.au/forums/topic/103871-tailgater/#findComment-1913836
Share on other sites

yep, in the UK, I was taught that :

Do not stop for animals. If you cause an accident by trying to avoid animals (cats, birds etc) - then that accident is YOUR fault. Anyone hitting you, if you put the anchor's on, is NOT at fault.

IIRC this is also in the UK's Highway Code (The road rules book for L plater's)

This is in both the Police & Insurance Eyes.

Of course this is not taking into account for 6ft high Roo's, wombats, cows etc.

Link to comment
https://www.sau.com.au/forums/topic/103871-tailgater/#findComment-1914449
Share on other sites

me and HR-32 live just off panalatinga rd  :rolleyes: in woodcroft area!

should of just let your foot off the accelarator and rolled slowing down.. if he persisted back into second could of smoke gone!

I would have done that however it was last saturday in the rain and all my experience ( two months ) it doesn't have much grip when you put your foot down. Its good to see there are some members in the southern area.

Link to comment
https://www.sau.com.au/forums/topic/103871-tailgater/#findComment-1916811
Share on other sites

Im just off States Rd (next parrallel rd down), but yes the Expressway & Panalatinga rd have a history of crazy speeding drivers & mad tailgaters.

Tailgaters suck dog-ass, in my opinion. Remember, 3sec gap between you and car in front. Safety first.

On a side note, some off the 150+kmph crashes on Pan. rd have been impressive to say the least..... !!

Link to comment
https://www.sau.com.au/forums/topic/103871-tailgater/#findComment-1918369
Share on other sites

Where does the law say you shouldn't stop for animals? (references please) Where do they draw the line? Have the categorised every animal into a handy guide with a red X for "kill" and a green tick for "don't kill!".

Anyway, good luck mowing down stray cows and sheep... :)

Pretty much it's up to the person to stay a safe distance behind you for EXACTLY that reason, it could be anything, hell you might have a brake malfunction or tailshaft drop out, and come to a screaming halt.

But yeah if someone tailgates be close enough that I can't even see their bonnet, I've got a towbar (at ~ radiator height) for just that purpose. :) Worst was a wanker following me home, when I was sitting on 110km/h in a 110 zone and he was RIGHT up my arse, we went past probably 2 over taking zones (plus it was a clear road with over taking markings mostly anyway), and he refused to go past. When we came to an 80 zone i just locked the brakes up back to 80 and he decided to overtake, yay. :D

edit: also, it seems to be mainly old people who tailgate, probably tailgating is one of the most annoying things (personally).

Edited by platinum
Link to comment
https://www.sau.com.au/forums/topic/103871-tailgater/#findComment-1918757
Share on other sites

Its just how it is.......

Now, if its a LARGE animal (human, cow, deer, kangaroo) you've obviosuly got to protect your own safety & aim to miss the animal.

Common sense, really. Although Im not too sure about native animals........... ???

Link to comment
https://www.sau.com.au/forums/topic/103871-tailgater/#findComment-1919099
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Latest Posts

    • Thanks for that, I'll check it all out. I can always do the brakes last anyway if its a problem.  The 16's are super cool, if they do fit I'll cruise around with them for a bit.  
    • Well, that's kinda the point. The calipers might interfere with the inside of the barrels 16" rims are only about 14" inside the barrels, which is ~350mm, and 334mm rotors only leave about 8mm outboard for the caliper before you get to 350, And.... that;s not gunna be enough. If the rims have a larger ID than that, you might sneak it in. I'd be putting a measuring stick inside the wheel and eyeballing the extra required for the caliper outboard of the rotor before committing to bolting it all on.
    • OK, so again it has been a bit of a break but it was around researching what had been done since I didn't have access to Neil's records and not everything is obvious without pulling stuff apart. Happily the guy who assembled the engine had kept reasonable records, so we now know the final spec is: Bottom end: Standard block and crank Ross 86.5mm forgies, 9:1 compression Spool forged rods Standard main bolts Oil pump Spool billet gears in standard housing Aeroflow extended and baffled sump Head Freshly rebuilt standard head with new 80lb valve springs Mild porting/port match Head oil feed restrictor VCT disabled Tighe 805C reground cams (255 duration, 8.93 lift)  Adjustable cam gears on inlet/exhaust Standard head bolts, gasket not confirmed but assumed MLS External 555cc Nismo injectors Z32 AFM Bosch 023 Intank fuel pump Garret 2871 (factory housings and manifold) Hypertune FFP plenum with standard throttle   Time to book in a trip to Unigroup
    • I forgot about my shiny new plates!
    • Well, apparently they do fit, however this wont be a problem if not because the car will be stationary while i do the suspension work. I was just going to use the 16's to roll the old girl around if I needed to. I just need to get the E90 back on the road first. Yes! I'm a believer! 🙌 So, I contacted them because the site kinda sucks and I was really confused about what I'd need. They put together a package for me and because I was spraying all the seat surfaces and not doing spot fixes I decided not to send them a headrest to colour match, I just used their colour on file (and it was spot on).  I got some heavy duty cleaner, 1L of colour, a small bottle of dye hardener and a small bottle of the dye top coat. I also got a spray gun as I needed a larger nozzle than the gun I had and it was only $40 extra. From memory the total was ~$450 ish. Its not cheap but the result is awesome. They did add repair bits and pieces to the quote originally and the cost came down significantly when I said I didn't need any repair products. I did it over a weekend. The only issues I had were my own; I forgot to mix the hardener into the dye two coats but I had enough dye for 2 more coats with the hardener. I also just used up all the dye because why not and i rushed the last coat which gave me some runs. Thankfully the runs are under the headrests. The gun pattern wasn't great, very round and would have been better if it was a line. It made it a little tricky to get consistent coverage and I think having done the extra coats probably helped conceal any coverage issues. I contacted them again a few months later so I could get our X5 done (who the f**k thought white leather was a good idea for a family car?!) and they said they had some training to do in Sydney and I could get a reduced rate on the leather fix in the X5 if I let them demo their product on our car. So I agreed. When I took Bec in the E39 to pick it up, I showed them the job I'd done in my car and they were all (students included) really impressed. Note that they said the runs I created could be fixed easily at the time with a brush or an air compressor gun. So, now with the two cars done I can absolutely recommend Colourlock.  I'll take pics of both interiors and create a new thread.
×
×
  • Create New...